Question about Mitsubishi WD-65733 65" HDTV

1 Answer

I have a wd65733....When I turn the set on, I get a picture then about 30 seconds later it will shut down giving me a steady orange light

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 5,138 Answers

CK Lamp and Lamp Fan, Mats has Lamps for $99.00
other companys want 273.00 1-800-628-1118

Encompass Parts Distribution has Free service Manual for this Model, you can print out online.

Posted on May 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why my printers show alarm U051


Hi, khaircarrier

That error has something to do with the page counter and the ink system. You'll need to reset your printer to clear the ink counters, after resetting it'll not display the error code again. Follow this procedure to reset the printer:
  1. Power off the printer.
  2. Holding the stop/reset button, press and hold power button also. Hold both buttons together for 5 secs.
  3. Still holding the power button, release the stop/reset buton, then press the stop/reset button twice.
  4. Release power button (the screen should now say 'Service Mode').
  5. Wait until the power button lights steady green, then press the stop/reset button three times with a 3 sec space between each press. On the 3rd press the indicator should turn steady orange.
  6. Press the power button once, (the orange light should go off).
  7. Open the printer and remove both cartridges. Wait for 10 seconds. Replace the cartridges and close printer. Wait for 30 seconds.
  8. Press the power button, and wait until printer has shut down.
  9. Press power button to power up. The printer will feed one piece of paper, then ask you to set the language.
The page counter should now be reset. That should solve your issue.

Mar 07, 2011 | Canon Office Equipment & Supplies

1 Answer

I'm tying to copy, comes up with check ink u163 col


It seems as though the ink counters are not being reset. Please follow the instructions below to reset your printer. Please read and follow the directions carefully as skipping any steps will not correctly reset your printer.

1. Power off the printer.
2. Holding the stop/reset button, press and hold power button also. Hold both buttons together for 5 secs.
3. Still holding the power button, release the stop/reset buton, then press the stop/reset button twice.
4. Release power button (the screen should now say 'Service Mode').
5. Wait until the power button lights steady green, then press the stop/reset button three times with a 3 sec space between each press. On the 3rd press the indicator should turn steady orange.
6. Press the power button once, (the orange light should go off).
7. Open the printer and remove both cartridges. Wait for 10 seconds. Replace the cartridges and close printer. Wait for 30 seconds.
8. Press the power button, and wait until printer has shut down.
9. Press power button to power up. The printer will feed one piece of paper, then ask you to set the language.
10. The page counter is now reset.

Re-install the printer cartridges and give it a try.

Aug 15, 2010 | Canon PIXMA MX310 All-In-One Printer

2 Answers

Projector screen turns off after 10-20 seconds


Is the projector receiving a source signal? if not it will power itself down after whatever time you have it set to do so when no signal is present.
Just an idea?

Jan 03, 2010 | NEC NP-1000 Projector

2 Answers

Alarm light on and u051 error mx310


Hi

You’ll need to reset your printer to clear the ink counters, after resetting it’ll not display the error code again. Follow this procedure to reset the printer--

1. Power off the printer.
2. Holding the stop/reset button, press and hold power button also. Hold both buttons together for 5 secs.
3. Still holding the power button, release the stop/reset buton, then press the stop/reset button twice.
4. Release power button (the screen should now say 'Service Mode').
5. Wait until the power button lights steady green, then press the stop/reset button three times with a 3 sec space between each press. On the 3rd press the indicator should turn steady orange.
6. Press the power button once, (the orange light should go off).
7. Open the printer and remove both cartridges. Wait for 10 seconds. Replace the cartridges and close printer. Wait for 30 seconds.
8. Press the power button, and wait until printer has shut down.
9. Press power button to power up. The printer will feed one piece of paper, then ask you to set the language.
10. The page counter is now reset.

Please rate the solution & revert for further assistance.

Thanks
Rylee

Jul 29, 2009 | Canon PIXMA MX310 All-In-One Printer

1 Answer

It's on, then it's off


Is the fan running properly or are any vents blocked?
Sounds like it is overheating.

Feb 15, 2008 | NEC MultiSync MT1050 Multimedia Projector

2 Answers

Lamp will not come on


try pressing and holding the enter button on the projector for about 30 seconds - this resets it. It worked for me!!

Feb 10, 2008 | NEC VT460 Multimedia Projector

1 Answer

Television shuts down as if thermal problem, but cool


Shorted red driver trans shorted red pic tube defective focus/screen block any or all of these stk's on convergence module check the solder joints on convergence module

Jan 06, 2006 | Panasonic PT-40LC12 40" Rear Projection...

Not finding what you are looking for?
Mitsubishi WD-65733 65" HDTV Logo

554 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1210 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

Jaime Hernandez

Level 3 Expert

2317 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...