Question about Vtech Cordless 6041 Phone

1 Answer

New vtech phone model cs6229-3 headset keeps saying line in use

The headsets keep popping up with the message "line in use" when they are not. I also unplugged the other phones etc... still show "Line in Use"? vtech model cs6229-3

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 41 Answers

These phones look at the voltage on the line to determine if the line is in use.

Do you have any devices on the line that get power from the phone line? If so, they may be loading down the phone line causing this issue. If you have these types of devices on your line, try disconnecting those devices and see if the problem goes away.

Otherwise, your phone line may be defective. You may need to contact your phone company to get the problem resolved.

Posted on Sep 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to make my 5.8 headset work with my new 6.0 headset


Sorry, you can't. Your new headset uses the DECT 6.0 protocol where your old 5.8GHz headset uses a different protocol. It would be like trying to play a videotape on a DVD player.

Sep 20, 2013 | Vtech IA5854 5.8 GHz Cordless Phone

1 Answer

All of my handsets say phone in use and i cant get them to hang up


Please check the line input at the base, if the cord is damaged or the line has no dial tone, you'll receive that message in all headsets, you could test by connecting any basic wired phone to the same cord, if there's dial tone maybe you have a defective handsets base.

Feb 21, 2011 | Vtech Digital Cordless Telephone VT-2568

1 Answer

The message light on the headset keeps blinking


You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

Jun 04, 2010 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

I forgot how to set my h700 motorola bluetooth to my new phone


Hi there,

Well you can please follow the below steps -
1. Gather and charge your cell phone and bluetooth headset.
2. Put your bluetooth headset in "pairing mode". For almost all headsets this is done by starting with the headset power off, then pressing and holding the multi-function button (the button you press to answer a call) for a few seconds. First, a light will blink showing you that the unit is on (keep holding the button) and a few seconds later, the LED on the headset will blink in alternating colors (often red-blue, but this can be anything really). The blinking lights indicate that the headset is in pairing mode.
3. Use the cell phone to "find" the headset. Usually this is a setting in the menus of the phone, and it's different for each phone. Most newer phones will have some kind of "bluetooth setup" menu. Older phones may have this menu buried in the general phone settings.
4. Provide a PIN code. When the phone "finds" the headset, it will ask for a PIN code. Most of headsets, this code is "0000". Enter 0000 into the cell phone when prompted.
5. Wait for a message. The phone and headset should connect and you should get a connection message on the phone. It should say something like "Hands Free Connection Established" or something along those lines.
6. The headset and phone are now paired. 

Good Luck!!

Mar 31, 2010 | Motorola Mobility H700 Wireless Headset

1 Answer

How do i pair the device?


Hi there,

Well you can please follow the below steps -
1. Gather and charge your cell phone and bluetooth headset.
2. Put your bluetooth headset in "pairing mode". For almost all headsets this is done by starting with the headset power off, then pressing and holding the multi-function button (the button you press to answer a call) for a few seconds. First, a light will blink showing you that the unit is on (keep holding the button) and a few seconds later, the LED on the headset will blink in alternating colors (often red-blue, but this can be anything really). The blinking lights indicate that the headset is in pairing mode.
3. Use the cell phone to "find" the headset. Usually this is a setting in the menus of the phone, and it's different for each phone. Most newer phones will have some kind of "bluetooth setup" menu. Older phones may have this menu buried in the general phone settings.
4. Provide a PIN code. When the phone "finds" the headset, it will ask for a PIN code. For 99% of headsets, this code is "0000". Enter 0000 into the cell phone when prompted.
5. Wait for a message. The phone and headset should connect and you should get a connection message on the phone. It should say something like "Hands Free Connection Established" or something along those lines.
6. Finish up. That's it! The headset and phone are now paired. 
Please post comments for more help or information......

Good Luck!!

Thanks

Mar 26, 2010 | Motorola Mobility H700 Wireless Headset

1 Answer

How to replace the voice tube on pulsar 590a? Note: The previous tube broke in half...I need to remove that before putting in the new one..


gently pull the remainder of the tube out of the socket (pulling in a straight line from the headset as to not snap it inside of the socket). It will provide a significant amount of resistance just before it comes out. Just wiggle it the tinest little bit to help it pop out.

To put the new one in, just line it up with the socket and with your fingers close to the end going into the headset (within 3/4" - to keep from snapping the new one in half). Gently push it in. Once it gets past the initial kind of pop then it should slide the rest of the way really easy (like it does when you push it in for storage).

Jan 05, 2010 | Plantronics Pulsar 590A Wireless Headset

1 Answer

Can I use Bluetooth headset on Bluetooth enabled land-line phone?


See:http://www.testfreaks.com/blog/review/vtech-ls6245-cordless-phone-with-bluetooth/. Looks like you could at least with this one. I am also looking to do the same.

Dec 12, 2009 | Vtech Lands Phones

1 Answer

Vtech CS5113 won't show on headset or base there is a new message


I have a CS5113 new 5.8GHz phone. It was not using some time. After that when i plugged , charging led is glowing on phone. it was charged 16 hours. but no display on phone. Please suggest the remidy.

Sep 07, 2009 | Vtech 5.8GHz Cordless Phone with Digital...

1 Answer

Plantronics 220


Begin with the headset turned off. Press and hold down the silver call control button in for 6-10 seconds. The light will flash blue first. Continue to hold the button down then release the button when the indicator light starts flashing red then blue.

Aug 14, 2008 | Plantronics - Bluetooth Headset Plus Base...

1 Answer

Sync the headset


You never said what model is your phone but the general practise is to pair the headset to the phone.how?? Make sure the headset is fully charged ,normally showing blue light depending on the brand. 1>While the phone is on ,press a button on the headset and it(headset)should show a blue light depending on the brand. 2>keep this button pressed and go to your phone's bluetooth configs and select a 'add audio divice' tab.The phone will search for for any headset in the vicinity till it finds yours. 3>Select your headset name shown on the phone and you could be required to enter password to pair,in this case most will be (0000)or (1234). Sorry had to be this long!!!!

Apr 24, 2007 | Jabra BT350 Bluetooth Headset Headset

Not finding what you are looking for?
Vtech Cordless 6041 Phone Logo

Related Topics:

4,251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vtech Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Cindy Wells

Level 3 Expert

5129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a Vtech Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...