Question about Philips J44414

2 Answers

Won't work at all

My computer will not recognize this camera even after installing software

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Philips Master
  • 2,130 Answers
Re: won't work at all

1st You download Webcam Driver.
webcam After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

Posted on Dec 24, 2013

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers
Re: won't work at all

Uninstall everything. unplug the cam. restart. put cd in. run the auto run and it will install the drivers and program for the cam. after its done take the cd out. plug in your cam. the PnP will find it and automatically update the drivers and recognize the cam. it should work then.

Posted on Dec 20, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

The webcam doesnot working and not instalation because i do not have the cd to the instilation.

The Installation CD / Installer software can be had by going online to Microsoft and downloading the appropriate software from their support site.
Once installed, your computer should see/recognize the camera and be able to utilize it. You may have to restart the computer after you install the software.

Aug 02, 2010 | Microsoft LifeCam VX-6000 (68C-00001)...

1 Answer

Web Camera Installation Problem, Zebronics Viper New Web Cam

In addition to the webcam software you may have to download some support software separately. I have a Logitech and it needs Microsoft DirectX 10 to perform correctly.
As its a new webcam I suggest you contact Zebtronics from their support website and ask them what the requirements are - you may need SP3 for example

Jul 30, 2010 | Webcams

1 Answer

I want to remove 'Logitech w/ Vid' & re-install the orig software

There are 2 options you can use.

1. Try the commercial unistallers like Final Uninstaller, Perfect Uninstaller, total unstallers etc....

2. You can use the "Restore" option utility in XP

May 25, 2010 | Logitech QuickCam Communicate STX Personal...

1 Answer

How do i install my web cam ew192aa


Plug the camera's USB cord into a free USB port on the computer, if this hasn't been done already. After giving the computer a moment to recognize the camera, a balloon will pop up saying new devices have been found.

Insert the web camera's installation CD, and wait for the installer to appear. Click "Next" on each window as needed to install the software. If the installer does not automatically appear upon inserting the disk, open "My Computer", right-click on the CD drive, click "Explore", then open "setup.exe".

Launch the web camera software, which can normally be found in the start menu under "All Programs". Test the camera to ensure it is working properly.

Good luck!
Save a tree.

Apr 13, 2010 | HP EW192AA Webcam

1 Answer

I have installed the software three times. The

THe device is not responding to the driver, it seems to be hardware problem wit hthe camera as it is recognised.

Apr 11, 2010 | Samsung Pleomax PWC 3800 Webcam

1 Answer

Recently bought the VX-1000. It shows up great on the camera in "My Computer" but anything else it does not get recognized. In fact even on the "my computer" it shows up as camera #3. I only have 1 camera...

I have the same model. I enjoyed some 'opportunities' getting it installed and working properly. Start by disconnecting the camera. Since you have downloaded the latest version of the software, uninstall the existing software. Open Device Manager. I image that is where you are seeing the multiple cameras. Right click on each camera and uninstall it. The computer should now be free of cameras and software. Turn the computer off and leave it off for at least 30 seconds. Restart the computer and let it start-up completely. Now install the new software. At the end of the installation you will be prompted to connect the camera and do some configuration.

I found it worked better for me to use a different microphone, but that's optional.

Good luck, and please let me know how it works out for you!

Feb 21, 2009 | Microsoft LifeCam VX-1000 Webcam

1 Answer

Quickcam pro 9000 install

Normal 0 Normal 0 Did you install the software with the camera connected to the computer? Disconnect the camera from the USB port and reinstall the software. When the program asks you to connect the camera, do so, and it should work. Hope this is of some help. Bud

Aug 13, 2008 | Webcams

1 Answer

My webcam is not recognized by my computer

when I have had this happen I unplug camera reboot wait until everything is loaded replug camera in camera is found.
If this does not work delete all camera drivers by
Start/control panel/system/device manager/right click camera properties delete driver reboot do this with camera disconnected
on reboot install drivers ensure they are installed properly system/device manager no yellow mark on it. reboot when system up and running plug camera in this should work

Jul 27, 2008 | Creative Labs Live! Cam Voice Webcam

1 Answer


dont plug ur camera into the usb port while installing the software.after completing the installation it will ask u to plug in the cam by itself.hope it works all the best

Apr 10, 2008 | Logitech Webcam

1 Answer

Logitech Quickcam Sphere

Try uninstall both software and hardware,After that connect the camera and install the software,I hope it works for u.

Sandeep SIngh

Jan 27, 2008 | Logitech QuickCam Express Web Camera

Not finding what you are looking for?
Philips J44414 Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Webcams Experts

micky dee

Level 3 Expert

2602 Answers

Neville Vyland
Neville Vyland

Level 2 Expert

68 Answers

Larry Maranto

Level 2 Expert

197 Answers

Are you a Philips Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides