Question about Russell Hobbs RH-HB3 Handheld Blender

2 Answers

Russell hobbs rhhb3 handheld stopped working

Like your problem, mine the same. trying to figure out how to take it appart to see what isn't working. Power?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

Yes, pry the display cover off and you will find 2 screws. You will find a switch and circuit board. From the circuit board to the switch you will finf a fuse. This is probaby the problem.

Posted on May 19, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I have same problem. Were you able to take it apart? Any suggestions?

Posted on Mar 08, 2010

  • Bob Hewitt Jan 21, 2011

    I had the same problem and was able to disassemble the unit down to the brushes!! Pretty easy when you know their dirty little secret!!

  • exfi Apr 19, 2011

    could you please let me know how to disassemle the unit after removing screws

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The buttons on my vita-mix vm0115e wont work. We have been loosing one button at a time. Was going to see if there was a loose cable or something, but I can figure out how to get the base off.


WE do not have your model here in NZ but this is how you get into our models
Remove square rubber base beaker locates onto. Remove motor driving clutch. Remove 4 screws under rubber pad you have just taken off.

Mar 28, 2014 | Vitamix Vita-Mix VM0115E 36021 Blending...

1 Answer

Need a rubber seal for russell hobbs 18276 blender


I also needed a seal - contacted Russell Hobbs - told that product is discontinued - they do not hold stock on the seal. Great service !!

Dec 05, 2013 | Russell Hobbs 18276 Allure 1.5l Jug...

1 Answer

I would like blade seal


Are you in the UK? If so, I got hold of replacement parts for my russell hobbs hand blender from http://www.productcareuk.com .They have a telephone number too if you cant see it on their website.

Good luck!

Aug 11, 2012 | Russell Hobbs 14449 2Speed Blender

2 Answers

My ninja blender won't start


Same thing happened to me and I ONLY used the thing 2xs (I was about to go H.A.M aka hard as a muthaF'er considering the price) then I tried the smaller cup size and it worked then went back to the larger pitcher and tried again. You have to ensure you have all the lock spots aligned and the top of the pitcher down securely. It worked after that...I also smelled like I was burning rubber at first but it works now...

Jan 05, 2012 | Blenders

1 Answer

Ice maker not working and the red light inside is blinking


You directed this question at me, but unfortunately this isn't my expertise and I am unable to provide you with a real solution at this time.

Hopefully one of other experts will be able to provide you with a real solution.

Thank you for using FixYa.

Dec 24, 2011 | KitchenAid Kitchen Aid Kitchenaid 5-speed...

1 Answer

Service center required in Gurgaon/Delhi, INDIA for Russell product


i bought a juicer model no. RJE700 last year .since i bought it it gives a burnig smell and a squeaky sound inspite of readjusting the fitting of the parts.help

Aug 17, 2011 | Russell Hobbs RH-HB3 Handheld Blender

1 Answer

I have just bought a Professional Platinum 4500 blender. When I press the self clean button, there is no cycle; it stops as soon as I release the button. What am I doing wrong? I followed the instructions...


I'm afraid I can't answer this, but am posting to say I've just discovered exactly the same problem with my newly-purchased blender - same model - and have contacted Russell Hobbs service department to find out if I'm doing anything wrong (i'm sure I'm not!). I'll post any response here.

Jan 11, 2011 | Russell Hobbs Blenders

Not finding what you are looking for?
Russell Hobbs RH-HB3 Handheld Blender Logo

Related Topics:

717 people viewed this question

Ask a Question

Usually answered in minutes!

Top Russell Hobbs Blenders Experts

eyecam

Level 2 Expert

94 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

79865 Answers

Are you a Russell Hobbs Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...