Question about Kenmore Sewing Machines
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Instruction Manuel
I took the foot off and don't know how to get it back on. There is a curly pin that came off with it and I don't know where it goes.
There is the foot, screw, and pin. Help!
Posted on May 02, 2008
SOURCE: Top tension adjustment
Believe it or not, most computerized machines have an automatic tension. This works well providing, the thread is thru the tension wheel setup.
But for further reference,
loops on the bottom-- problem on the top.
loops on the top--problem on the bottom.
Posted on Apr 24, 2009
If you can lower or disengage the feed dogs you can stitch free motion.
If the the feed dogs cannot be adjusted as described, you can set the stitch length to zero.
You can also tape an index card over the feed dogs and punch a hole where the needle needs to enter the needle/face plate.
A darning or free motion foot is needed.
Take a presser foot with you when shopping for the foot as it is important to match the shank length.
Newer sewing machines are low shank and the older ones long shank.
You can also order online at Clotilde (see "which foot to use" for a guide).
Posted on Feb 20, 2010
Tips for a great answer:
Jan 29, 2017 | Sewing Machines
Sep 15, 2012 | Kenmore Sewing Machines
Aug 30, 2012 | Kenmore Sewing Machines
Mar 08, 2012 | Sewing Machines
May 30, 2011 | Kenmore 11206 / 11306 / 11506 / 11606
Mar 17, 2010 | Kenmore Sewing Machines
Feb 27, 2009 | Kenmore Drop-In Bobbin 505S-21BH...
Mar 27, 2008 | Sewing Machines
Oct 09, 2017 | Kenmore Sewing Machines
230 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: