Question about Maytag PAV2300 Top Load Washer

1 Answer

Pav2300aww washer was running and stopped with water in it and will not start again

Posted by on

  • pattyg Jan 09, 2008

    I have the same problem! washer stopped during wash cycle & will not work any more..still has wash water in it & prior to it completely stopped working, it made a loud grinding sound during the spin cycle & sometimes just during the regular wash cycle.

  • jimterr Dec 09, 2008

    sav4710aww will only fill to mini wash then stops



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Washer overfills with water even when changing the level setting.

Posted on Dec 23, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Cycle starts, but does not fill with water

When I start a new cycle, I first hear the pump run to empty out all remaining water, and after that I hear the motor run for the regular washing cycle, but there is no water in the dishwasher. After a few minutes, the cycle stops, and the washer claims the dishes are 'clean'. When I try starting a new cycle over and over again, about one in 20 times, the cycle will run normally with water. But then the next time, the problem starts all over again. Once a cycle starts correctly, everything works fine, including the rinsing.

Jan 11, 2013 | Bosch SHX5AL02UC Dishwasher

1 Answer

Frigidaire (LTF2940E) Washer starts, stops, starts, stops...

The cycle doesn't advance When the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

  • It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.

  • It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.

May 07, 2009 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

Whirlpool LSQ9500LQ0 stops runs only for about 2 minutes

Try this first..Same thing happened to me yesterday..

I pulled the washer away from the water source..unscrewed the water lines from the water intake (not the washer)..there is a screen in the both hot and cold screens were filled with debris..after cleaning the screens the washer works just fine..try this easy fix before you start looking into things like the motor or a switch somewhere...

Dec 19, 2008 | Washing Machines

1 Answer

Water will not shut off.

1st: check to see if the hose that the water comes out when it drains is higher than the water level in the washer.

2nd: It could be the plastic line that is inside of the washer that determines the water level.

Check the hose at the back to see if it's higher first.

Let me know

Dec 13, 2008 | Kenmore 80754 Top Load Stacked Washer /...

1 Answer

Hotpoint topload washing machine won't water won't stop running.

washer top load will not stop filling even when turned off

Dec 01, 2008 | Hotpoint VBSR3100D Top Load Washer

1 Answer

Modle 80 washer.

If in spin the water drains ok then your coupler is faulted, If not the motor is faulted.

Aug 16, 2008 | Kenmore 22422 Top Load Washer

1 Answer

Washer won't run through a complete cycle-stops at 29 minutes

There is a service manual behind the control panel it will show you how to test the door locks. If might have a bad lock solenoid.

Aug 01, 2008 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Kenmore Oasis HE Washer

problem started when washer started itself up twice in the middle of the night....after that the washer seems to have problems figuring out what it wants to do...when running a wash it will start, run for 2 minutes then start scanning does not land on a will spin, stop, start...sears has replaced the mother board 3 times....and we will be phoning them again as it has not fixed the other time it did not spin properly and clothes were wet...we have a dedicated surge protector on it...we have had our electrical checked and no problems there...sears confirmed that as well..the techs have given up on it and don't know what to do with is still under warranty and now costing sears more to service it then replace it....time for them to do the right thing and "take it back"...very disappointed in this washer...wish me luck when i call them again...they must be sick of hearing from

Apr 26, 2008 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer


Check for low water pressure. Clear screens in inlet valve. Do-not remove screens. This unit will turn off if not filled in specified time.

Nov 08, 2007 | Maytag MAH6700AWW Neptune Front-Load...

Not finding what you are looking for?
Maytag PAV2300 Top Load Washer Logo

Related Topics:

237 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

588 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

John Tripp
John Tripp

Level 3 Expert

4655 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides