Question about Brother MFC 210C All-In-One InkJet Printer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The waistinktank is full and has to be changed. Buy a new one from a service partner. Dont clean the old one, cause the felt will be as stone afterwards and wont take up any ink! See link how to open printer: http://www.hstt.net/refill-faq/inside.html#Brother_mfc215c See here how to do the resetcode procedure: http://www.fixya.com/support/t139675-need_reset_purge_counter_due_error_46
Posted on Sep 24, 2007
you should manually reset your PURGE COUNTER to ZERO so that your printer will work again. Follow these steps:
Unable to Clean error means purge counter is already full. Please refer below for the instructions on troubleshooting your machine.
1. To enter MAINTENANCE Mode: Press MENU, MONO START, 4X on ARROW UP. (within 2 seconds).
2. Using arrow up button look for the following:
a. 8 then press SET
b. 0 then press SET
3. Using MONO START, just press it until the word "PURGE XXXXX" comes out.
4. Using arrow up button look for the following:
a. 2 then press SET
b. 7 then press SET
a. 8 then press SET
b. 3 then press SET
This is to reset the purge counter. Then press stop/exit
5. Using arrow up button look for the following:
a. 0 then press SET
b. 1 then press SET (To reset unit)
a. 9 then press SET
b. 9 then press SET (To exit Maintenance mode)
Posted on Jul 11, 2009
Download the manuals from:
Please rate this solution in case you find it helpful, else leave a comment and I shall revert back with more suggestions.
Posted on Aug 11, 2009
Testimonial: "Thank you for the site info! i looked for a long time, wish i had asked and followed your advice the first thing as it went right to it."
Try running a purge count through the maintenance menu. You can enter maintenance mode by pressing: Menu> * 2 8 6 4 Press 8 0 Scroll down to purge count value. You should get there after pressing the down key 24 times. Press 2 7 8 3 to reset the purge count. The printer will then restart. Then try printing again.
Posted on Jan 08, 2010
Tips for a great answer:
Mar 22, 2014 | Brother DCP 165C Compact Color Inkjet...
Feb 23, 2013 | Brother Multi-Function Center MFC-3360c...
Apr 02, 2012 | Brother MFC 420CN All-In-One InkJet...
Jan 30, 2011 | Brother Multi-Function Center® MFC-215C...
Aug 05, 2010 | Brother DCP 130C All-In-One InkJet Printer
Mar 09, 2010 | Brother Multi-Function Center MFC-3360c...
Dec 15, 2009 | Brother MFC 210C All-In-One InkJet Printer
114 people viewed this question
Usually answered in minutes!