Question about Logitech Z-540 Computer Speakers

1 Answer

Logitech z-540 no sound

I just got a new comuter and went to set up the speakers, but when i tried to play music, no sound was coming out. Do i need a new driver? What do i do?

Posted by on

  • eventualchao Jan 15, 2009

    i have the same problem. when i go to audio devices it doesn't see any


×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 36 Answers

Here are a few basic steps. they seem abit logical but just have a double check on them.

1. Check that you speakers are plugged in.
2. That the wire going into the back of the computer is going into the green imput (that is for the speaker sound to come out)
3 If you have a combination of speakers make sure they are all wired properly.

If your sure all the wiring is right. Check to see if the volume on the status bar at the bottom left of your desktop is turned on. This will be a small speaker double click on it, check to see if the volume is turned on.

If all this is correct it may be a driver problem. If so come back and let me know and I will guide you through the drive troubleshooting for this.

Sean

Posted on Dec 11, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Speakers wont come on


Lets start with the basics.
1. Make sure the power cord to the computer speakers are plugged in. Check at the wall and make sure the power cord is connect to the back of the speaker. If there is a power button make sure it is pressed in the on position. Make sure the volume level is turned up.
2. Check the computer and make sure the sound is not on mute. Turn the volume level up from the computer settings.
3. Try playing some music. If you hear sound you are good to go.
4. If you are not able to hear anything than continue. I would suggest plugging your speakers into you cell phone. Try playing some music from your cell phone.
5. If music plays through the speakers from your cell phone, something is wrong with the computer. If no sound plays with your cell phone then something is wrong with the speakers.
6. If worse comes to worse bring your computer into a computer store. Tell the salesman you want to buy a new set of speakers. You just want to make sure your computer works with the speakers before you buy them.
7. If all else fails, ask a local tech you trust.

May 25, 2015 | Audio Players & Recorders

1 Answer

2006 infiniti m35 no sound from speakers


Yes an amp that is not working could cause this to happen. But I would check it out a little more because when you did the speaker test and all the speakers worked then that doesn't sound right. Find the amp and it could be just a loose connection that is giving you all these problems. Good Luck

Mar 12, 2014 | Car Audio & Video

1 Answer

My logitech z-5300 speakers were working perfect to play itunes & sounds from all programs. Got video camera & tried to use it but no sounds played around in control panel now my speakers wont...


Hi

You do not say which operating system you are using. My answer can therefore only be general rather than specific to your operating system.

The Video Camera you tried to install probably has an in-built microphone. Connecting this is may have changed the default settings for your audio devices.

You have a number of options for fixing this problem.

SYSTEM RESTORE
Start > All programs > Accessories > System Tools > System Restore > Restore my computer to an earlier time > selected a highlighted date in the calendar and an Event in the schedule before the date you tried to install the video camera > restore > restart the computer (you should hear the windows logon on tones if you are using a windows operating system) > (My) Music > Sample Music > double click on any track to test the sound playback.

AUDIO SETTINGS
Start > Control Panel > Audio devices > Audio (Playback Devices) > Set Defaults (set the Speakers to be the Default Playback devices > apply > ok > restatrt computer > (My) Music > Sample Music > double click on any track to test the sound playback.


AUDIO/SOUND DRIVERS
Reinstalling the Audio/Sound Drivers would also probably resolve the problem by restoring your Default Audio settings, if you have the Driver CD for your Laptop or Desktop Motherboard > install Audio/Sound Driver > restart computer > (My) Music > Sample Music > double click on any track to test the sound playback.

I cannot direct you to a driver download site, because you have given no information about your computer.

If this answer helps you, please take the time to rate it. This helps answerers better understand the needs and the point of view of the asker and helps us explore the best ways to provide useful, high quality answers.

If you need further help, please feel free to post another question or add a comment to this question.

Thanks for using FixYa.

Aug 31, 2011 | Logitech Z-5300 Computer Speakers

2 Answers

I have no sound ive went in to device manager and its showing audio devices but still have no sound...do i have speakers built in on this tablet?if so how do i get them to work?


1st tell me what it says if u play music in windows player.

because you might have no sound drivers.

tell me asap so i can help you.

but if you find you have no drivers, here download it here.

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1849071&lang=en&cc=us&taskId=135&prodTypeId=321957&prodSeriesId=1847962

1st choose your operating system
2nd choose all the drivers you needed (esp. the sound driver)
3rd install it.
4th try to play music this should work.

Jan 28, 2011 | Compaq tc4400 Tablet PC

1 Answer

My laptop don't have sound went i play the music, ...


Hi, click on the "Start Button," in the (right pane) Control Panel, next in the category listings, select Hardware and Sound, open, and click on the "Manage Sound Devices." The Sound window will open; click on the "Playback" button, there should be a Speakers Icon, click on it, look below to find the "Properties button, click to open the next window. In the next window there will be (4) four buttons "General, Level... First click on the "General" button, in the top of the window there will be a "Driver" button, click on that button to open. Select to "Update Driver," just click on it, the Drivers will be updated for you. Next you ca go back and press the other areas, Speaker Level etc... Note: "Remember to click on the "Apply and OK buttons afterward to make sure the changes take effect. "Restart the computer to finalize the changes." "Rate the solution on it helpfulness, its away of letting me know if you resolved the problem or you need further assistance, thank you."

May 19, 2010 | Computers & Internet

1 Answer

Sound only playing out of one speaker in Windows XP


Go into Sound Settings under control panel. There should be a left-right audio control setting in there.

If that doesn't work, try updating the sound driver for your computer.

Jun 01, 2009 | Intel Motherboard

1 Answer

5.1 surround not working


I uninstalled the previous audio software that the computer had. (Realtek HD audio) and turned off the onboard sound card in the BIOS settings. Then I went back and uninstalled all the new audio software and reinstalled it with all antivirus programs turned off. The main trick was to make sure that the matrix is turned off. If it is on it will play sound from all the speakers at once as if it were mono. Turning it off after changing the BIOS and uninstalling the old software and reinstalling the new allowed it to work properly. I hope this helps.

Sep 10, 2008 | Logitech Z-5300 Computer Speakers

1 Answer

Sound not coming out of the speakers


Check your sound settings on your computer
Check to amke sure your speakers are muted by the computer
Check to see if the volume is down or muted on the program that is playing the music

Sep 04, 2008 | Manhattan 1100 Computer Speakers

1 Answer

Garbled sound


Your Codec is damaged. Reload your drivers for your sound card. First uninstall the old ones. Moving your non working speakers and they play fine says they are good. I have a problem that you have new speakers and the problem went away. Drivers do not care what speakers are on the other end. It only produces output. Now that your second pair is working correctly, put back the Harmons and see if the problem comes back

Mike

Apr 23, 2008 | Harman Kardon SoundSticks II Computer...

11 Answers

Logitech x540 speakers- rear speakers distorted on matrix mode


I installed my soundcard which is the sound blaster SE audigy but when i try to test the sound i see that it does not sound separately.What i have to do to make them sound saperately when i'm testing it ?

Apr 16, 2008 | Logitech X-540 Computer Speakers

Not finding what you are looking for?
Logitech Z-540 Computer Speakers Logo

Related Topics:

347 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Audio Players & Recorders Experts

Michial Gueffroy

Level 3 Expert

1138 Answers

William Covington

Level 1 Expert

16 Answers

Are you a Logitech Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...