Question about Mitsubishi VS-50707 50" Rear Projection Television

1 Answer

VS 50707 turns on, then off immediately

Then three green lights blink right after the tv shuts off. Error code comes back "12" or "no error". What's up?

Posted by on

  • Anonymous Mar 03, 2009

    TV shuts off automatically.
    The timer is turned off but the tv shuts itself off.
    Now, the tv will not turn on.
    Pushing the power button I hear a click but the device won't turn on.



×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

On the signal board replace the caps by the 5/9 volt regulators. c2p04 is the main culprit. 6 caps in total can be changed. I believe c2p05 also.

Posted on Dec 15, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It was working fine until yesterday. It shut itself off. I powered it back on and befor the screen could come back on it shut itself off. I checked cables and uplugged it for 24 hours. The first time...


Hi Daniel,

Please check if you can access the "error code operational check" to narrow down where the fault came from.
How to enter to error code operational check.
Note : The TV must be in shutdown and not have been switched off. When the TV is switched off, the error code automatically resets to 12 (no error).
Press the buttons on the front panel "Input/Device" and "Menu" at the same time and hold it for 5 sec, activate the error code mode. The LED light will flashes denoting a two digit error code.
Example : if the error code is 22, the led will flash two times pause and then flash two times and will repeat the error code for five times.

If you can't access the error code operational check , please let me know the exact pattern of the flashes of the led light and its color. Check if it will continually flashes green to give you the caused of the symptoms and best solution.

Good luck and take care.

Nov 15, 2011 | Mitsubishi VS-50805 50" Rear Projection...

2 Answers

When I turn on the tv I see the green light power come on and then it will just shut off right away


Depending on actual model number most of these sets have a self check.

When green light goes out: On front of set press and hold both the menu and input (device) buttons at the same time for at least 5 seconds and release both.

Power light will blink a two digit error code like: 2 blinks, 2 blinks, a pause and repeat several times.

Let me know what error code you find and comment here and I will tell you what it means.

If this told you something you did not know rate this solution as very helpful as I do this here for free.

SD TECH

Oct 05, 2010 | Mitsubishi Televison & Video

1 Answer

Why wont my mitsubishi big screen tv turn on? the green light comes on but then shuts right back off.


Model number given indicates it should be a 2000 year model.

If so, it should have the self check feature; try to turn the set on and when the green light goes off: On the front of the set press and hold both the menu and input buttons for at least five seconds and then release both buttons.

Power light will blink a two digit error code like: 2 blinks,pause and 2 blinks (2,2 error code is most common one). It will repeat the error code several times.

Let me know what error code you find and I will tell you what it may mean.

if this told you something you did not know rate this solution as "very helpful" as I do this here for free.

You can post a comment on this page.

Regards, SD TECH

Aug 11, 2010 | Mitsubishi VS-60607 TV

1 Answer

AFTER TURNING ON TV ,THE GREEN LIGHT COMES ,SOUND STARTS AND THEN TV TURNS OFF ASAP


after tv shuts off press and hold menu and input buttons on tv at same time for about 8 second. power led will start to blink error code 12 ok 22 dead short 23 deflection failore 24 vertical failore. after you know error code have electronic technition repair for you. J.D.W.

Jun 24, 2010 | Mitsubishi VS-50607 50" Rear Projection...

2 Answers

I turn the tv. on , the green light comes on then


When you turn it on and it shuts off---ON THE FRONT OF THE SET PRESS AND HOLD BOTH THE MENU AND INPUT(DEVICE) BUTTONS TOGETHER FOR AT LEAST 5 SECONDS AND RELEASE BOTH BUTTONS.

Power light should blink a two digit error code---for example: 2 blinks, a pause and 2 blinks--This is the most common error code.


Let me know what error code you get and I will tell you what it means and if 2-2 what the problem is.

If this information helped you, rate this solution as I do this here for FREE.

SD TECH

Nov 12, 2009 | Mitsubishi WS-65807 65" Rear Projection...

2 Answers

Mitsubishi VS-50707 shuts down sporadically


you can do a self-diagnosis test by pressing the menu and input/device button on set for 5 sec and see what error code it gives you. Count the blinks followed by a short pause then more blinks. This is the error code.

Mar 10, 2008 | Mitsubishi VS-50707 50" Rear Projection...

1 Answer

Mitsu. VS-50707 problems


12 = No error detected, check power supply.
check all your voltage coming out of the power supply and check the fuses.

Dec 10, 2007 | Mitsubishi VS-50707 50" Rear Projection...

1 Answer

50707 does not turn on, goes off immediately code 24, relay clicks


1. MAY BE INTERMITTENT, SELF-DIAGNOSIS ERROR 23 OR 24. CHECK SOLDER CONNECTIONS AT CONNECTOR "DY" ON THE YOKES. 2. SHUTDOWN AT POWER WITH SELF-DIAGNOSIS ERROR 23 OR 24. CHECK C411 2200 UFD 35 V AND C412 10 UFD 50 V, BOTH LOCATED ON THE MAIN PCB.

Aug 27, 2007 | Mitsubishi VS-50707 50" Rear Projection...

1 Answer

TV turns off right away relay clicks


1. MAY BE INTERMITTENT, SELF-DIAGNOSIS ERROR 23 OR 24. CHECK SOLDER CONNECTIONS AT CONNECTOR "DY" ON THE YOKES. 2. SHUTDOWN AT POWER WITH SELF-DIAGNOSIS ERROR 23 OR 24. CHECK C411 2200 UFD 35 V AND C412 10 UFD 50 V, BOTH LOCATED ON THE MAIN PCB.

Aug 19, 2007 | Mitsubishi VS-50707 50" Rear Projection...

Not finding what you are looking for?
Mitsubishi VS-50707 50" Rear Projection Television Logo

227 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1241 Answers

The Knight
The Knight

Level 3 Expert

75871 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...