Question about Magellan eXplorist 210 GPS Receiver

3 Answers

No functions work.

When first powered up there is a message that says "Unit Currently Contains No Map! Initiating Map Upload." Nothing happens. None of the functions work and the only way I can power it down is to remove the batteries.

Posted by on

  • 7 more comments 
  • Anonymous Dec 18, 2007

    When I open my unit a print appears the unit contains no map uploading map

  • JUN AMS Dec 18, 2007

    when unit is open a message would flash on the screen



    "CURRENTLY CONTAINS NO MAPS

  • JUN AMS Dec 18, 2007

    Unit Currently contains no map! Initiating Map Upload

  • minhajdhaka Apr 02, 2008

    When I turn on the GPS it says "UNIT CURRENTLY CONTAINS NO MAP! INITIATING MAP UPLOAD" and no other button functions.

  • fidel1973 May 25, 2008

    after purchasing this unit explorist 210 suddenly the word appeared "unit currently contains no map" "initiating map upload" please i would like to know the best way to resolve the problem of uploading the map and recovering it . my unit is numbered under a serie 0112570027971 and am living in morocco.

    thanks for the help

  • owch Aug 09, 2008

    when i open it it show in french appareil actuellement sans carte telegchargement carte

  • nyctek10 Mar 10, 2009

    I'm stuck here too!!! E-mail me at NYCTek10@gmail.com if you have the base map. Thanks a lot.

  • raobn Mar 30, 2009

    I own Explorist 210 Magellan. Suddenly there is display on the screen 'Unit Currently Contains No Map! Initiating Map... '. I correspond with concern over mail but they could not help me. They advised me to take the set to the seller from where I purchased. I sent mail to them in India but the dealer never responded. Is there any way to over come this problem

  • Anonymous Apr 04, 2009

    when i put in it the batteries i have the same messg. but when plug into my mac it works

×

Ad

3 Answers

Buy a garmin

Posted on Oct 28, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Go to: http://www.magellangps.com/support/product.asp?prodid=1114

Or, if this doesn´t work, go to www.magellangps.com, click on "support", click on "legacy products" (left) and click on "eXplorist 210 Europe" (do NOT click on "eXplorist 210 North America")

On this page click under Updates/Upgrades on "version 2.57", and follow the instructions.

After you have installed the firmware you will have the basemap and some new windows on the GPS. Good luck and enjoy!

Posted on Sep 05, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 24 Answers

Goto magellangps.com and report your problem. my 210 explorist came with the basemap already installed.im giving you the phone number for tech support also it is 1-800-707-9971 or by fax 1-909-394-7050(attn:tech.support) if that dont work e-mail me and i will send you the basemap in a email

Posted on Dec 13, 2007

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 7 Answers

SOURCE: No map

Install the firmware again:

Go to: http://www.magellangps.com/support/product.asp?prodid=1114

Or, if this doesn´t work, go to www.magellangps.com, click on "support", click on "legacy products" (left) and click on "eXplorist 210 Europe" (do NOT click on "eXplorist 210 North America")

On this page click under Updates/Upgrades on "version 2.57", and follow the instructions. You will have to register your GPS, register it under a European country.

After you have installed the firmware you will have the basemap and some new windows on the GPS. Good luck and enjoy!

Posted on Sep 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When you turn the unit on a message comes onto the screen that says. UNIT CURRENTLY CONTAINS NO MAP! INITIATING MAP UPLOAD. you cant do anything with the unit message stays on the screen.


when you turn the unit on a message comes onto the screen that says:
UNIT CURRENTLY CONTAINS NO MAP! INITIATING MAP UPLOAD. you cant do anything with the unit message stays on the screen.

May 01, 2011 | Magellan eXplorist 400 GPS Receiver

2 Answers

Magellan Explorist 500


The necessary map software is not installed - did you buy the unit with software?

Mar 19, 2008 | Magellan eXplorist 500 GPS Receiver

1 Answer

Dead 210 GPS


Hi do you still have the software that came with the gps as it sounds like their is corrupt data on the gps.
You will need to reinstall all software and load up all the maps that you need.
Let me know how you get on ok

Dec 10, 2007 | Magellan eXplorist 210 GPS Receiver

1 Answer

UNIT CURRENTLY CONTAINS NO MAPS


You need to load maps into your device.

Apr 22, 2009 | GPS

1 Answer

NO MAPS


Follow these steps to fix the “UNIT CURRENTLY CONTAINS NO MAP! INITIATING MAP” ERROR.
Step 1: Download the firmware update for your Sportrak model from:
Magellan GPS. Extract the zip file to your desktop.

Step 2: Download the base map file, NA_B101.IMG. This one is hard to find but you might look
on the following yahoo group page for the file: m330 : The Map 330 Club . Look in their FILES folder for the file called, NA_B101.zip. You may have to join this group to gain access to this folder. Download the file and extract it to your desktop.

Step 3: Now that you have the files necessary to fix your unit, follow these step exactly to upload the base map file.
  1. Turn off the unit and connect it to your computer using the Magellan serial cable. If your computer does not have a serial port you can buy a, SERIAL to USB adaptor.
  2. Now simultaneously press and hold that button the looks like the world and the button with the man on it (GOTO button). While holding these buttons, press and release the power button. Two zeros will appear in the middle of the screen like this, 00. Using the central joystick, change the zeros to the number, 98. The press the enter button once.
  3. Go to the folder where you extracted the firmware update you downloaded first and look for the Magup.exe file and double click it to launch the Thales Navigation Firmware Uploader. Click NO on the UPLOAD pop up window. Now Click on EXPERT from the menu bar. The EXPERT SETUP window appears. On the EXPERT SETUP window choose your GPS model. Then choose the com port your GPS is connected to. Now check the box next to the word ON under EXPERT UPLOAD. Then click OK.
  4. [i]Note: If you do not know what your serial com port is, here is a way to find out. Click on START, and then on CONTROL PANEL. In the CONTROL PANEL, scroll down and double click on SYSTEM. Then click on DEVICE MANAGER. In the DEVICE MANAGER, look for PORTS (COM & LPT) and click in the + symbol to the left to expand the category. You should see your serial listed here and the com port it is on will be listed to next to it.
  5. On the Menu bar click on UPLOAD. Click OK on the reminder pop up window. On the SELECT UPLOAD TYPE window check the box next to BASE MAP ONLY. The SELECT BASE MAP FILE window appears. In this window Navigate to the folder on your desktop where the, NA_B101.IMG file is located (you should have already extracted it here earlier if you are following all the steps.) Select the NA_B101.IMG file and click OPEN. The window closes and the UPLOAD FILE window appears. Click on the box next to UPLOAD and the upload process begins automatically. The process may take several minutes. Once it is done, restart your unit and you are on your way.
Since you now have downloaded the latest firmware and your unit is now functioning properly, you might as well update your firmware if it needs it. Follow the instruction found on the page where you downloaded the firmware update for your unit in step one.cool.gif
Happy navigating!biggrin.gif

Apr 10, 2009 | Magellan SporTrak Map GPS Receiver

1 Answer

CAN NOT GET MAP ON GPS MAGELLAN EXPLORIST 210


try updating the firmware from the magellan website that fixed mine.

Oct 29, 2008 | Magellan eXplorist 210 GPS Receiver

1 Answer

No map


Install the firmware again:

Go to: http://www.magellangps.com/support/product.asp?prodid=1114

Or, if this doesn´t work, go to www.magellangps.com, click on "support", click on "legacy products" (left) and click on "eXplorist 210 Europe" (do NOT click on "eXplorist 210 North America")

On this page click under Updates/Upgrades on "version 2.57", and follow the instructions. You will have to register your GPS, register it under a European country.

After you have installed the firmware you will have the basemap and some new windows on the GPS. Good luck and enjoy!

Apr 13, 2008 | Magellan eXplorist 210 GPS Receiver

2 Answers

Explorist 300


since the unit doesn't have a base map it needs to be loaded with the base map so send it for a service so that the base map could be added.

Jan 04, 2007 | Magellan eXplorist 300 GPS Receiver

Not finding what you are looking for?
Magellan eXplorist 210 GPS Receiver Logo

331 people viewed this question

Ask a Question

Usually answered in minutes!

Top Magellan GPS Experts

Marvin
Marvin

Level 3 Expert

82322 Answers

Will Halftowaite

Level 3 Expert

508 Answers

The Knight
The Knight

Level 3 Expert

75846 Answers

Are you a Magellan GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...