Question about Spectra Measuring Tools & Sensors

Open Question

How do i find the information to calibrate my spectre hv101 laser. cant find how to on their web page.

Posted by on


3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 5603 Answers

SOURCE: New out-of the-container Spectra Laser

The laser must be close to level before rotation AND the beam is enabled. The Latter function is required for safety of vision.

Posted on Jun 14, 2011

  • 10319 Answers

SOURCE: New out-of the-container Spectra Laser

To let you know that the laser is in standby mode, the battery LED fl ashes every 4 seconds.

To deactivate standby mode and restore full operation of the laser, press and hold the laser's or remote control's

manual button for 3 seconds.
The laser and all other functions turn on again.

Posted on Jun 15, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers


can you inform how i can calibrate laser level alignment lb 4

Jan 23, 2013 | Leica Laser Alignment Lb-4 Dual Grade...

1 Answer

Opc error.. it wont record any source..

Web search "optimum power calibration error". The manual incorrectly calls it Optimize Power Control on Page 2. It has nothing to do with the source and all to do with the media and how the laser calibrates to it.

Sep 20, 2011 | JVC XL-R5000BK CD Player

2 Answers

My spectra hv101 rotates but the line is not visible even 2 inches from unit

First be sure to check the obvious such as batteries and cleaning the battery connection points. If that doesn't do it, try freezing the instrument by placing it in a deep freeze for at least 45 minutes. I had two non functioning laser diodes on my 5 point Stanley Laser and for some unknown (to me) reason it worked like a charm.

Sep 16, 2011 | Spectra HV101 Multipurpose Construction...

1 Answer

Printer keeps showing Office Jet 8500 Wireless

The printer wants to align the print cartridge, if you print out the alignment sheet, and then following instruction, place on scanner and scan it in etc, and it fails to callibrate, I have found it is because some of the information on the calibration page is not being printed correctly so therefore machine cant calibrate the print heads from it, this is normally due to poor quality cartridges or failing/empty print cartridge or cartridges, these use two I think, and I bet one of the colours from the colour isn't printing properly, replace colour cart if blacks look good. Below is a link to HP so you can see what a alignment page needs to look like to pass calibration, compare yours and you may find a colour is dodgy on it.

see HP's support information

Nov 12, 2009 | HP OfficeJet 7310 All-In-One InkJet...

1 Answer

My printer status page says tonersok but black cant print

Try this one, Turn on the printer, Take out the inks, remove the printhead, put back the printhead make sure it will snap and you hear a click, put the inks back, wait for the printer to initialize, Press the Menu button, look for Calibrate printer, then print calibration page, then scan it after. Load a regular paper. Then try to print a demo page by pressing Photo and Copy at the same for 5 seconds then let it go. If same problem persist call this no for further assistance 1800 421 6699

Sep 01, 2009 | HP Color Laser 2550N Printer

2 Answers

Cant calibrate laser

You must place the unit 30' from a wall, level the unit with the level indicating vials, mark spot on wall or object, rotate laser 180 degrees and level with vials again, if it comes to the same spot your unit is calibarated. if not then you must do this process at least 2 times(1 for each directional level) and use the adjusting screw to move vial. it takes a while to get it right.

May 04, 2009 | Robotoolz RT-5250-2XPK ePlane XP High...

Not finding what you are looking for?
Measuring Tools & Sensors Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Spectra Measuring Tools & Sensors Experts

Vuk B

Level 3 Expert

683 Answers

Brad Brown

Level 3 Expert

17162 Answers

Tom Chichester

Level 3 Expert

44058 Answers

Are you a Spectra Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides