Question about Polti Vaporetto 2400 Canister Steam Vacuum

1 Answer

NO STEAM EVEN THO THE DIAL GOES RIGHT UP TO THE RED

HI MY VAPORETTO LEADER STEAM CLEANER WAS WORKING PERFECTLY AWEEK AGO ,ALAS TODAY NO STEAM OR JUST A TINY DRIP,please help some one ,without my polti i am doomed,my trusted friend polti needs your help and advice,many thanks ANN

Posted by on

  • 2 more comments 
  • bluesome-11 Dec 11, 2007

    sorry about capitals,wouldn't dream of shouting,my mistake ,please accept my sincere apology,thanks bluesome-11

  • Anonymous Jan 08, 2008

    gauge not working

  • Anonymous Jan 12, 2008

    Alas My machine seems to have the same ailment, the water is heating up, according to the dial, but no steam is coming out. I think this must be a problem with the machine, rather than a blockage in the pipe, because the iron won't work either. Any advice gratefuly received, my Polti is sadly missed!!

  • Anonymous Apr 19, 2008

    Polti Steam Cleaner although the dail is right up no steam comes out

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Hi i've had the same problem Put a phial of Kal stop into 1000 or 1500ml of water into the tank, let it heat up and it should break down the limescale of the solenoid. It's worked for me. Have a good evening;-)

Posted on Mar 11, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My polti steam cleaner wont work when i click trigger


Check the wand and line for calcium build up especially in the nozzle. Hard water will deposit a lot of calcium in the system, which needs to be cleaned regularly to keep it running freely.

Aug 25, 2014 | Polti Vaporetto 2400 Canister Steam Vacuum

1 Answer

Lost instructions for vaporetto polti 2400


Hi,
Download instruction manual for Vaporetto 2400

Good Luck
Rating the solution is highly appreciated

May 31, 2010 | Polti Vaporetto 2400 Canister Steam Vacuum

2 Answers

How do I undo the torx screws that hold the Polti 2400 Steam Cleaner (Polti Vaporetto 2400) together? There is an electrical fault and I will have to strip it down to investigate.The house RCD trips when...


With a torx screwdriver! There's nothing special about these screws except the shape of the hole in the head. Commonest size in small domestic machines is T15.

Oct 15, 2009 | Polti Vaporetto 2400 Canister Steam Vacuum

1 Answer

POLTI VAPORETTO PROBLEMS


Hi, It is the solenoid that is sticking, It there fore needs opening up, the solenoid valve stripping and cleaning, or replace at a cost of about £12 then putting back together. they don,t like being left and not used. It is possable if you keep clicking for it to start working again.

Dec 09, 2008 | Polti Vaporetto 2400 Canister Steam Vacuum

2 Answers

Polti steam cleaner


It should go just below the red providing steam isn,t escaping from the cap otherwise you won,t get the pressure build up to enable it to come out when you pull the trigger

Oct 23, 2008 | Polti Vaporetto 2400 Canister Steam Vacuum

1 Answer

Polti vaporetta - steam escaping from valve


Are you sure it is not escaping from the top? if so replace top.I have had this myself

May 11, 2008 | Polti Vaporetto 2400 Canister Steam Vacuum

1 Answer

Cant find out where i get a new gun handle mine has snapped


http://www.spares2you.co.uk/Vacuum+cleaner+spares/Polti+steam+cleaners/Vaporetto+2400/

Mar 14, 2008 | Polti Vaporetto 2400 Canister Steam Vacuum

2 Answers

Polti Vaporetto 2400: Water out light comes on when tank is full


Hi you need to put 5ml of Kal Stop fo Polti machines into 1000/1500ml of water into the tank, The stronger solution is better (1000ml) Let it heat up and this should break down the limescale on the solenoid. I tried this today and it has worked saving ££££'s in repair by Polti.

Nov 04, 2007 | Polti Vaporetto 2400 Canister Steam Vacuum

Not finding what you are looking for?
Polti Vaporetto 2400 Canister Steam Vacuum Logo

Related Topics:

1,272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polti Vacuums Experts

Jose Pino

Level 3 Expert

563 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Polti Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...