Question about Canon imagePROGRAF iPF8000 Printer

1 Answer

Why doesn't my Canon IPF8000 completely shut down when I turn it off? The LCD is still lit with a blank screen? This may have happened after I updated the firmware to 1.36. Can I revert back to the old firmware and do a test?

Posted by on

  • hansonellis Sep 12, 2009

    Is the blank screen suppose to be lit during the automatic maintenance? It is a green blank LCD screen with no message. How do I turn the automatic maintenance off so I don't get a blank green screen? Thank you very much!

  • hansonellis Sep 12, 2009

    When it is in sleep mode, the LCD screen completely turns off. However, when I power it off manually, the LCD screen is on (lit green), but is blank with no information. Is this because I have automatic maintenance on? If so, how do I turn it off? Thanks,
    Keith

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 117 Answers

In order to allow for the automatic maintenance feature of this printer to work, it needs to have power, but will effectively be in  a "sleep" mode most of he time, hence the blank screen

Posted on Sep 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power turns but screen stays black no


Sounds like you need a new LCD Screen(is the screen a little lit up or completely blank) If completely blank than most likely the LCD needs to be replaced if it appears to be slightly lit up than most likely it is a software related issue.

Mar 31, 2014 | HTC Cell Phones

1 Answer

My HP pavillion g series,it turns on but the screen stays blank and dark


My computer doesn't flicker any colour before it goes blank etc. When i turn it on, the screen is blank/black and It says its on.. by the light being lit up, but nothing happens. :/ I don't understand, whats the problem?

Apr 26, 2012 | HP Computers & Internet

1 Answer

Ink tank counter reset code for Canon ipf8000


However, you have to perform the reset before the Maintenance Tank is completely full.
Once it is marked full, the printer won't start, even in Service Mode, until you replace the Maintenance Tank. If this happens, you can still reset the tank by inserting a new Maintenance Tank, start in service mode, then put the old cart back in and reset it
1. Start the printer in service mode (hold down Feeder Selection and Information while pressing power. Keep the feeder and information buttons down until you see an "S" in the upper right corner of the LCD.
2. Press "Menu". There will be a new entry called "SERVICE MODE" with a different menu structure and navigation system.
3. Familiarize yourself with the following facts while in this menu:
a. Left and right change the categories.
b. Down and up go into, and out of (respectively) submenus.
c. From what I've read, the service mode is very powerful - lots of opportunities to really mess things up. Be careful.
4. Select "Service Mode" as you normally would, i.e. scroll down, then press OK.
5. Press the right arrow until you see "Initialize".
6. Press the down arrow.
7. Press the right arrow until "W-INK" is displayed. (Note: be sure you select "W-INK" from the "Initialize" choices instead of "W-INK - CHG CNT" which sounds like just the thing, but doesn't work.)
8. Press OK.
9. The display should show "=W-INK" for about half a second, then plain "W-INK".
10. Press up until you get back to the main menu. Press information until the maintenance cartridge capacity is displayed.
11. The maintenance cartridge capacity is now 100% (aka empty).
12. Press and hold Power to turn off your printer.
13. Turn it back on normally.
14. Maintenance cartridge capacity (not usage!) should still be at 100%.

Dec 31, 2010 | Canon IMAGEPROGRAF IPF8000 InkJet Plotter...

1 Answer

I have a multisensor Error message with the Canon iPF8000 model.


I have a Canon IPF8000s. It was working when we bought. But my employee screwed me over and now it doesn't work. I am getting the same error. The screen (Small one where the information is displayed) is saying Multi-Sensor Error, Please turn off printer, wait a while, then turn printer on again. I do this to no avail. It seems to turn on fine. Display would say to close the cave cover and the ink tank cover, so I do this then it would go to the multi sensor error. Please help me, I'm just a kid (18) starting business, and I want to impress my parents. Help! Please!

Aug 21, 2010 | Canon imagePROGRAF iPF8000 Printer

1 Answer

My acer aspire laptop has a blank screen when it is turned on it was working fine and I pressed alt+f10 then it went blank with just a white blinking cursor


Hold down the power button until the computer completely shuts off, wait 10 seconds, power it back on.

What happens?

Nov 21, 2009 | Acer Aspire 5720 Notebook

1 Answer

Canon IPF8000 does not turn off, LCD is blank and lit green.


Basically, unplug the copier from wall electrical socket and plug in see there are changes on LCD. If that is not working, then reset the copier to manufactor settings see if the same problem persist.

Sep 14, 2009 | Office Equipment & Supplies

1 Answer

Iphone does not work


If it is a blank white screen then your lcd is broken. you would need it to be replaced. to be sure its broken. let the iphone power up and after 5minutes plug it into itunes. if it connects normally then this confirms that the iphone lcd is broken. if not try to do a restore.

Apr 19, 2009 | Apple iPhone Smartphone

1 Answer

Hp ze2000 shuts down


Without more information I cannot be sure, but I would say that it could possibly be set to use an external monitor. There is a FN key command to switch between your LCD Screen and an external screen. Try that. If you have an external monitor that you can plug into the VGA connection, that should tell you for sure. Good luck.

Nov 12, 2008 | HP Pavilion ze2000 Notebook

1 Answer

LCD monitor is blank


Canon would have to fix this for you. The fault may be the screen itself, or the LCD viewfinder drive IC on the camera's circuit board. In this case they will replace the circuit board.

Jerry G.

Dec 09, 2007 | Canon PowerShot G3 Digital Camera

1 Answer

Lcd viewer


Probably the ribbon cable that connects the LCD to the camcorder is cracked or getting pinched somehow.

Jan 27, 2007 | Canon ES10V Camcorder

Not finding what you are looking for?
Canon imagePROGRAF  iPF8000 Printer Logo

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1992 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...