Question about Dryers

1 Answer

Kenmore series 80 was working. opened the door to check on

Something. It won't start. Is getting electricity as light is on when door is opened. Belt is attached to drum.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 986 Answers

If a dryer is not working at all that's not good! But it doesn't mean you need to go appliance shopping just yet. It may be something very simple like a bad door switch or even a broken door switch actuator, in a kenmore dryer there is a tab thats sticks out of a hole in the wall that allows the dryer to run only if the door is shut, other models may have button that protrudes out of the dryer and when the door is shut, this allows the dryer to run. These switches go out from time to time, also if a dryer is full of lint build-up over time this will cause the dryer high limit or fuse to blow. The fuse is located near where the blower is in most cases. When the air in the dryer gets way too hot the fuse/hi-limit will blow and the house wont burn down.

Posted on Sep 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My series 80 Kenmore dryer won't start


Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

';';

Jul 30, 2011 | Kenmore 800 6983 Electric Dryer

1 Answer

Kenmore 80 series electric dryer Model - 110-60882990 The dryer won't turn on. Once the start button is pushed it makes a single clicking noise. If I open/shut the door and push the start button...


check the actual door switch,, you can jumper it to see if this is the problem, Just connect the 2 wires together , if this cures the problem replace the switch

May 25, 2011 | Dryers

1 Answer

Kenmore 80 series electric dryer. metalic sound/burning smell


When i put clothers in my dryer it does not move and it make a sound when i push the start buttom

Feb 24, 2010 | Kenmore Dryers

1 Answer

Kenmore Electric Dryer Series 80 110.86980800 burning smell


If this is a new element, this is normal until it has been used a few cycles. Use it and watch it carefully for a while. If it continues have a competent person to take the rear panel off and check for burnt wires or lint inside the unit.

Sep 21, 2009 | Kenmore 62802 Electric Dryer

1 Answer

Kenmore 80 series electric dryer wont start


Push the button manually and see if the light goes off . If it does , then the problem is the thermal fuse (a white slim piece of plastic with 2 wires connected to it ) located on the blower housing beneath the drum .

Jul 22, 2009 | Dryers

1 Answer

Kenmore 80 series Dryer: Door Light stays on and wont start


Check your door switch actuator part number 691581 303c159.jpg

Mar 05, 2009 | Kenmore 800 7982 Dryer

1 Answer

Kenmore 90 Series Electric Dryer will not run


chech to see if your belt is broken. It may have a belt switch

Oct 28, 2008 | Kenmore 62602 Electric Dryer

1 Answer

Kenmore 90 Series Electric Dryer won't start


Hi.Thanks for the question I would look to see if the belt is ok.Some dryers have a belt break switch, which is located by the motor.I would check the door switch.on the door try that thanks

Sep 29, 2008 | Kenmore Elite HE4 Electric Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Brad Brown

Level 3 Expert

15633 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...