Question about Philips 43PP9202 43" Rear Projection Television

1 Answer

43'' HD projection philips tv color change

I have a 43'' HD projection philips tv and the right and left side of the tv seem to be more of a yellow when on a all white picture and more green when on a all blue picture. It is not very obvious until you start thinking about it. Is this something important and what does it mean?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Philips Master
  • 8,457 Answers

Check on ur auto covergence.Might have magnatics interference,the tv tech.use a dequasing coil to solve this prob.when it very bad,colors mast together.

Posted on Sep 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 43" Hitachi HDTV worked


Please do us a favor and rate this by cliking the thumps up icon located here >>>>>>

Projection TV sets have two very common problems. One is convergence ( 3D/Warped video) the other is CRT fluid ( Dull Video). Below are more details for both items. Also, complete repair kits with instructions and repair support are avail from site such as www.TvRepairKits.com

Common Problem #1) Convergence has gone out

Projection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When its out of alignment the video will look 3D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the TV menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.

This is a very common failure on these projection sets and a fairly simple DIY fix. All projection sets including Samsung, RCA, Sony, Philip Magnavox, Panasonic, Pioneer, Akai, GE, JVC, Toshiba, and others at some point will have the same problem.

Common Symptoms include....



  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
  • TV shuts off after powering on. Power light will blink. TV may also make a chirping noise.
Here are some pics of convergence problems.


7859b01.jpg

e87380c.jpg
69189a5.pngSOLUTION #1

For more more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Common Problem #2) CRT Fluid is Cloudy

Projection TV tubes have a liquid coolant that is used to keep them from overheating. After many years the coolant in the blue and green tubes will become cloudy and cause the screen to look dull, red/orange, etc. You may even see halos around images.

Picture of a set that needs the fluid changed.

578ba6c.jpg
TV set after fluid change

65af323.jpg

69189a5.pngSOLUTION

You can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Please do us a favor and rate this solution after reading

May 21, 2011 | Hitachi 43UWX10B 43" Rear Projection...

2 Answers

Philips 43pp92 blue will not converge


STK392-120 is convergence correction amplifier.. the problem is the convergence circuit... try to check the small Valuie electrolytic capacitors or High value resistors! maybe the said parts is in change Value... used a ohmmeter tester to find the chenge value parts!.

Nov 05, 2007 | Philips 43PP9202 43" Rear Projection...

1 Answer

Ihave a toshiba 43 inch hd 2002 rear projection the picture has shiffited to the right can I fix this


This tv have a problems known as a convergence problems,it dead.The tv have colors lines R,G,B mis alignment,have colors shadows picture or 3D picture? The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts on the tv convergence board,require changing to solved the tv picture convergence problems.The shop,will cost u $300-350 for parts and labors.

Oct 16, 2010 | Toshiba 51H84 51" Rear Projection...

2 Answers

Red images with green projected to the right with a green halo on upper and lower left corners


This set needs a fluid change. Between the face of the picture tubes and projection lens there is a layer of coolant fluid. The fluid has turned a milky brown color and is degrading the picture. The tubes have to be removed in order to do this properly. I would suggest you contact a repair shop and have them check it out for you as this can be very complicated. Thanks for using fixya and I hope this helps you out.

Nov 04, 2009 | Philips 43P8341 43" Rear Projection...

1 Answer

Getting the VCR to play through the old Philips TV


Hi,
Looks as if you were using the AV cable to connect the VCR to TV. The three colored cables should be connected in the following order:
Yellow: From VCR Video out to TV Video In
Red : VCR Audio out (right) to TV audio in (right)
White: From VCR Audio out (left) to TV audio in (left)

Also check the color on the sockets on TV and VCR and match accordingly.

Hope this solves your problem. Thanks

Jul 12, 2009 | Televison & Video

1 Answer

Adjusting to the proper color


Tint would be the control that will control the color balance, but this sounds like it may be deeper then that. Turn your color all the way down so that you have a black and whit picture. If the picture is still yellow then you have a problem with the blue picture tube.

Feb 02, 2009 | Philips 43PP9202 43" Rear Projection...

1 Answer

Color convergence on our Phillips 46999302/17F



If you are not able to adjust the convergence using the remote you need to replace the convergence chips. 

Typical Symptoms

1) Convergence menu does not work for one or more colors.  
Example: RED moves up,down, but left or right fails. 

2) Screen is bowed looking.

If you have one or more of the problems above you need to replace the convergence chips. You can get a kit and instructions from www.TvRepairKits.com 

Jan 01, 2009 | Philips 43PP9202 43" Rear Projection...

1 Answer

Color problem


have the tv converged to see if that wont help

Nov 05, 2008 | Hitachi 43F300 43" Rear Projection...

1 Answer

My ''9P5034C102" 50'' Philips Projection TV


Common problem with the older projection Magnavox TV set. The opto IC chip has failed. Try www.magnavoxhelp.com - They have instructions and kits on their site.

Jan 26, 2008 | Philips 9P5034C 50" Rear Projection...

1 Answer

HITACHI 42 INCH HD


Convergence Amp IC issue....originals are STK392-110..replace
W / upgrade Stk394-160E Hitachi part # CZ 01341 and check nearby resistors for overheating............................T.

Jan 07, 2008 | Hitachi 43UWX10B 43" Rear Projection...

Not finding what you are looking for?
Philips 43PP9202 43" Rear Projection Television Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74211 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...