Question about GE Profile Harmony DPGT750EC Electric Dryer

1 Answer

Harmony Start/stop button cover

The white cover part of my GE Harmony Start/Stop button dryer button fell off the dryer and my child had it in her mouth gagging. The dryer has only the green backing and the silver metal square with elongated corners showing. How do I reapply the button cover. Called GE and they had no ideas! They were not interested at all on the choking issue!

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 262 Answers

IF IT WHAT IM THINKING ABOUT A LITTLE SILICONE WILL DO IT

Posted on Dec 11, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It reads error is reading or writing improperly, replace main PCB


disconnect washer from dryer and unplug washer for a few seconds. plug it back in and you should get the congrats screen,don't hit the ok button hit start/stop button and power button at the same time. it should bring you back to your home screen.

Sep 23, 2013 | GE Profile Harmony WPGT9360E 4.0 Cu. Ft....

1 Answer

My Ge Harmony Dryer sometimes will not spend. It heats up but will not spend at times.


Try manually start the dryer. Take a piece of tape and tape the switch on the door. Then take one hand turn the drum and press the start button at the same time. If is starts then then you have bad motor.

May 18, 2011 | GE Profile Harmony DPGT750EC Electric...

1 Answer

I have a GE profile harmony gas dryer that says "a problem has been detected call 1-800-GE-Cares' on the display. I just finished putting in the new dryer drum that fell apart. Any suggestions? Reset...


If there were no problems before replacing drum I would go back and make sure all 3 wiring connections are made behind the door panel. From there this machine is too complex to diagnose over the phone.

Mar 03, 2010 | GE Profile Harmony DPGT750GC Gas Dryer

1 Answer

GE Harmony Elec. Dryer Blower Stops working or won't start up


Do this.

press "Home"
press "Help"
press both "My Cycles" and "Back" at the same time and hold them until service mode pops up.
It will tell you what's wrong.

Jul 22, 2009 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE Profile Performance Dryer


GE Easy care 4 prong Installation

Grn = Ground
White = Neutral ?
Black = ____ top or bottom?
Red = ____ top or bottom?

Please advise

Aug 19, 2008 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE DRYER STOP RUNNING


sounds as if the belt has snaped and the drum has droped stopping you moving the drum

Dec 05, 2007 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE Profile Harmony Electric Dryer - Starts out heating but then screen says SENSING


nicknames, usually with long dry times I suspect a pinched or clogged vent. Make sure you check that first. You can do a test to check the moisture sensor. The 2 sensor bars will be on the inside of the drum just below the vent cage. Press the home and then help button. Next press and hold the help and start/stop button for 3 seconds. On a dry sensor, you should see a voltage of approx 4.75 displaying. Now get a wet rag and hold them across the 2 sensor bars. You should see the voltage drop to about 1.0 volts. If it does this your sensor is ok. Check the vent and this out first and we will take it from there. Catriver.

Dec 03, 2007 | GE Profile Harmony DPGT750EC Electric...

Not finding what you are looking for?
GE Profile Harmony DPGT750EC Electric Dryer Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dryers Experts

Dave Harrison

Level 2 Expert

114 Answers

John Tripp
John Tripp

Level 3 Expert

4655 Answers

vince

Level 3 Expert

1214 Answers

Are you a GE Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...