Question about SonicWALL PRO 300 Firewall

2 Answers

Sonicwall 330 pro

Just had a power surge, sonicwall went down,
Cannot access via tcp/ip or console,
Any otherway to get in to reload firmware?


Posted by on

2 Answers

Re: sonicwall 330 pro - SonicWALL PRO 300 Firewall Network Security & Firewall Devices

No reset button.
I think its fubar.

Posted on Feb 02, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has answered 200 questions.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 217 Answers
Re: sonicwall 330 pro

If it has a reset button, you'd want to try holding it down until you see the lights flash to let you know the reset completed. It should be fine after that, unless the power surge toasted it for good.

Posted on Jan 29, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I am a admin at a new company and they do not know nor can they find the Admin login and password. Is there a way to hack in to the SonicWALL PRO 230 Firewall unit?

Deafault user: admin
password: password

default ip:

if in case you cannot get in, you need to reset the device to its factory default.



Oct 29, 2010 | SonicWALL PRO 230 Firewall

1 Answer

Unable to access mailserver from out side my office

I have no idea what firewall you are using. Your posting is lacking crucial detail and that makes this almost impossible to answer you. However, I use a Cisco 5520 in a Data Center and i Host my own Exchange server. This is what you have to do to allow inbound and outbound SMTP traffic in that type of environment.

name (Internal IP here) Exchange description Internal mail server

access-list Inside_access_in remark Allow internal Exchange Server to send SMTP email outbound.
access-list Inside_access_in extended permit tcp host (Internal IP Here) any eq smtp

access-list outside_access_in remark Allow external entities to send SMTP email to Exchange Server
access-list outside_access_in extended permit tcp any host (Public IP Here) eq smtp

Hope this helps you.

Jun 29, 2010 | SonicWALL NSA 3500 (01-SSC-7016) Firewall

1 Answer

How to routing router static ip address and local

Use the Sonicwall configuration wizard..

Please find below is to configure what ever you want.

Setup Wizard - This wizard will help you quickly configure the SonicWALL to secure your Internet connection. Once completed, you can use the SonicWALL Web Management Interface for additional configuration.

Registration & License Wizard - This wizard will help you register you and your firewall with and obtain licenses for additional Security Services features.

PortShield Interface Wizard - Segment and configure the integrated managed LAN switch of the SonicWALL.

Public Server Wizard - Quickly configure your SonicWALL to provide public access to an internal server.

VPN Wizard - Create a new site-to-site VPN Policy or configure the WAN GroupVPN to accept connections from the SonicWALL Global VPN Client

Apr 22, 2009 | SonicWALL TZ170 (01-ssc-5740) Firewall

2 Answers

I need to be able to ping the SonicWall TZ190 wan ip from the Internet for tracert puposes. There is no ping response to that IP address. The manual says. Click Objects, and then Services. Verify that...

Saibrains is correct unless your firmware is of earlier version. you might have to upgrade your firmware. Also you can not use a port #
No ports required for Ping as it uses icmp packets

It needs to allow icmp 'echo-request' (type 8) packets out and icmp 'echo-reply' (type 0) packets in
to allow ping request. On earlier versions of the sonicwall firmware it only absorbed Ping request as to stop hackers from ping attacking pass the firewall.

check the manufactures website for your model and see if they have newwer firmware.

The GUI should have a place where you can set it up

Apr 09, 2009 | SonicWALL TZ170 (01-ssc-5740) Firewall

1 Answer

Sonicwall Safe mode Problem

How do I access the SafeMode menu?
In emergency situations, you can access the SafeMode menu by holding in the Reset button on the back
of the TZ 180 (it’s the small pinhole button located to the left of the Console port) for 12-14 seconds until
the ‘Test’ light begins flashing yellow. When the SonicWALL is booted into the SafeMode menu, assign a
workstation a temporary IP address of and attach it to a LAN interface on the TZ 180
Then, using a modern web browser (Microsoft IE6.x, Mozilla 1.4+), access the special SafeMode GUI
using the device’s default IP address of You will be able to boot the device using a
previously saved image, or you can upload a new version of firmware with the ‘Upload New Firmware’

Apr 07, 2009 | SonicWALL TZ 170 Firewall

2 Answers

I want to create site to site vpn with sonicwall tz170+ 2003serv

Complete documentation is available on the below link

Nov 17, 2008 | Sonicwall TZ 170 NFR (01-ssc-5564)...

1 Answer

Port forwarding

You have to create an object for your Web server and then set up new rule to forward traffic via port 80 to the newly created object.

Aug 21, 2008 | SonicWALL PRO 100 Firewall

2 Answers

How to configure Sonicwall TZ 190? I have connected console to the Sonicwall and trying to open it via Console. But no configuration or prompt is coming. Kindly help ASAP.

open control panel and then add printers and other hardware, then up in left hand menu go to system then hardware, device managed and check if your driver is updated. if it says it's working properly then uninstall it and it'll pop back up reinstall then it should work fine.

Dec 03, 2007 | SonicWALL TZ170 (01-ssc-5740) Firewall

2 Answers

Can't connect

it might probably a security issue , can u remember from which machine and from what ip you access the firewall before ??

Try to assign the ip from which you have last accessed your firewall
Good luck

Nov 20, 2007 | SonicWALL PRO 100 Firewall

2 Answers

Sonicwall Pro 300 DMZ Problem

If you're within a network and try connecting to computers on it with the WAN public IP, it simply won't work - you must use the network IP. On an external Internet connection, it should connect fine to the public IP. If you have access to an external machine (remote desktop), or if you know of an FTP proxy, you can try it that way. I also believe a web based FTP client would act as somewhat of a proxy, you could try that with the public IP and see how you go.

Aug 09, 2007 | SonicWALL PRO 300 Firewall

Not finding what you are looking for?
SonicWALL PRO 300 Firewall Logo

Related Topics:

497 people viewed this question

Ask a Question

Usually answered in minutes!

Top SonicWALL Network Security & Firewall Devices Experts

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a SonicWALL Network Security and Firewall Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides