Question about Digimate DGL26 Television

1 Answer

Power supply for digimate dgl26

My tv turns on and stays on, there is sound, but no disply (not even when i hit menu). Sometimes the picture flashes on when i change channels for a fraction of a second. The repair shop says i need a new power suppy board but i can't find one. The 1800 number on the back of the tv is attached to an answering machine that, apparently, no one responds to. I can't find a website, email address, phone number for digimate...so frustrating! Does anyone have any idea where i might find parts for digimate tvs???

Posted by on

  • 3 more comments 
  • kudlakat Jan 08, 2008

    Power supply fried No source for part found

  • mikeherriman Jul 20, 2008

    Dito, tv doesnt turn on.



    repair shop says it needs new Power supply.



    Damn!

  • Anonymous Oct 08, 2008

    Turn set on from cold start the power supply sizzles for about 2 seconds can not spot where it is coming from.The picture comes on for a split second when channels are changed .The picture in picture window is on the screen when with a narrow main picture is there. about 3 inches black bars on each side of picture.I suspect the power supply can it be repaired

    with out changing the module.

  • ticalico8 Dec 17, 2008

    Same problem. Press power, the red led goes green, I get a flash on the screen and sometimes i'll get sound but no video. Other times, i'll get the flash and the power LED goes red and TV goes off.

    Please help


  • negritohdz77 Dec 31, 2008

    i have the same problem. anybody that is able to find a power supply hit me back to negritohdz77@yahoo.com really need you help.. this tv is my playstation 3 screen

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,336 Answers

In seems like this brand of TVs do not have service parts or they are not longer being manufactured.
I repair these power supplies. If you need further assistance, write to jah2mil@hotmail.com

Posted on Dec 15, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV Flashing from Channel to Channel Non-Stop. Problem with the RCA F32689 32" TV My TV started jumping from channel to channel non-stop. There's no picture or sound - only channel numbers changing...


If still under guarantee take it back.
If not this sounds like a workshop job. If more than five years old (the TV, not you!) and you can afford it, junk this set and get a new one.

Sep 21, 2011 | RCA F32689 32" TV

1 Answer

T.v. turns on but won't stay on


You need to replace the power source part in your tv. This is what's causing the problem.

Jul 17, 2010 | Sony FD Trinitron WEGA KV-32FS120 32" TV

2 Answers

Sound problem


when you mail me,i have an service manual for you
haas1@kabelfoon.nl

Apr 02, 2010 | Philips 20DV6942 20 in. TV/DVD Combo

1 Answer

Viore 7 tv no picture and tv disply


it is possibly you have put it into Cable mode or Video mode or even channel 3. also check and see if the remote has vcr/tv or tv/video you might have pressed this and that is why your tv is blank.

Feb 11, 2010 | Televison & Video

3 Answers

Volume lock of philips vardan tv


I hv philips 21RF vardaan TV ,there is sound on AV channel. and the picture is blinking. even some menu setting have changed.. i tried using the service menu but cudnt understand anything. 2 new av channels have come.. av2 and front which were not present before. sound is not coming even on the other channels but picture is fine on them. only on the av1 channel it is blinking., the philips technision had solved this prob once by pressing some code by remote and i don't know the system code

Sep 10, 2009 | Philips 20DV6942 20 in. TV/DVD Combo

1 Answer

TV turned off itself


Can you still turn it on?
If so, does it stay on with sound?

If the sound is ok and the picture is blue (even when changing channels, inputs, etc.) the lamp may have gone out.

Can you see the TV menu when you press the menu button on the remote or TV?

Jan 07, 2009 | Sony KP-51HW40 51" Rear Projection...

2 Answers

Samsung tv


as far as it turning off on its own I would get a fan on it and see if that make a difference make sure that the fan is able to flow around the tv especially through the back of it, if this stops it from turning off then it is an overheating problem

Mar 22, 2008 | Samsung HCN4226W 42" Rear Projection...

2 Answers

Channel keeps changing


It sounds like a stuck button or switch. What happens when you hit the channel DOWN, does it still keep scrolling down?
Is this with or without the remote?
Have you tried it with the remote and or the TV?

Let me know whether you are changing the channels with the remote or the buttons on the tv and I can try to give you a couple more suggestions.
Mac =)

Feb 12, 2008 | Televison & Video

2 Answers

Television stays on one channel


You likely have bad solder connections in the tuner.

I’m happy to help further over the phone at https://www.6ya.com/expert/dewayne_4a10eab6caecdb92

Jul 12, 2007 | Sony KV-35V75 35" TV

Not finding what you are looking for?
Digimate DGL26 Television Logo

Related Topics:

433 people viewed this question

Ask a Question

Usually answered in minutes!

Top Digimate Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2336 Answers

 Grubhead
Grubhead

Level 3 Expert

5554 Answers

ray gallant

Level 3 Expert

52931 Answers

Are you a Digimate Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...