Question about Onkyo TX-SR606 Receiver

5 Answers

Onkyo tx-sr606 hdmi problem everytime i turn on my tv receiver and ps3 the hdmi wire must be pull out of the tv and put back in for the hdmi signal to work

Posted by on

Ad

5 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 9 Answers

Yes the OSD tends to stop working. Here's how to fix it:

http://www.youtube.com/watch?v=gj0x5S9ez5U

Posted on Dec 11, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

The problem is with the HDMI daughterboard in the AVR is bad. This is a well documented issue on this interweb! A general search in google can confirm. Here are some stuff cut and pasted frm their site and another forum. Onkyo USA Corporation (hereinafter referred to as Onkyo) hereby warrants all Onkyo products PURCHASED DIRECTLY FROM ONKYO OR AN ONKYO AUTHORIZED DEALER- WARRANTY PERIOD (from date of purchase) New Products: Receivers 2 years Parts & Labor-- You can go to the Onkyo webpage to find a n authorized service repairman.
*** I took mine to a service repair place today, the guy said that he had two that he just fixes yesterday. He said that this issue has given him a ton of work. Just make sure that you have your receipt from AN UNAUTHORIZED DEALER and that your still under warranty.
Receivers 2 years Parts & Labor

Posted on Jul 30, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem and had purchased the receiver over 2 years ago. I went ahead and called onkyo to report the problem and see how much it would cost to fix. I could not believe that they said they would fix the problem at no charge as long as I could provide proof of purchase. Thankfully, my Amazon receipt was still saved under my Amazon account. The receiver was 4 yrs old and they fixed the problem. I was worried the service would take forever as some posts had stated. However, it was fixed quickly, about 2 wks total. I only had to pay shipping to the service station which was about $22. I would highly recommend calling Onkyo if you have your receipt!

Posted on Jan 29, 2013

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The AVS Forum has extensive documentation of what causes this problem and how to fix it. Check out the discussion with solutions that work (I tried them on mine and fixed my HDMI problems). Go here: http://www.avsforum.com/t/1246078/how-to-diy-tx-sr576-tx-sr606-etc-hdmi-daughterboard-repair-for-dummies/690#post_24151775

Posted on Jan 03, 2014

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Hi d05a20m89
Does the tx-sr606 also have problems with its OSD ?

Posted on Dec 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tx-sr606. Signal lost to TV on HDMI Out. Coming in from Component Video or DVD or Game Components. Audio is playing but I get no signal to TV. HDMI Cable is fine. usually have to turn it off or unplug...


Check the most popular solutions.Also check that if you give the receiver some time (in my situation at this moment about 10 minutes) after you turned it on an selection of source.

I just received the new capacitors from a German store and will install them 2 weeks from now.

Rgrds,

Phil

Jan 25, 2011 | Onkyo TX-SR606 Receiver

1 Answer

HDMI signal cuts out for a few seconds constantly from receiver to television. It does it when switched to cable box and the roku box. Onkyo TX-SR606 Scientific Atlanta Cable box thru HDMI Roku Box...


Mine did the same thing where the screen would go black for a few seconds and then the picture and sound came back. I would try (1) switch HDMI cables, (2) try a different HDMI input in the back of the receiver, (3) try different input in the back of the TV. None of these seemed to work with mine. I finally ended up running the cable box direct to the TV and only run the audio through the reciever via coax or digital. No more problems. I think the HDMI inputs in the back of the reciever have a problem continuously carrying the signal if it is the leaset bit weak.

Sep 08, 2010 | Onkyo TX-SR606 Receiver

1 Answer

Has trouble getting input signal


This unit has a defective hdmi board,this is a common problem with this model. The unit is to be taken to a onkyo service center for exchange of the hdmi board under warrenty, if out of warrentyit will cost you several hundards of dollars.

Apr 19, 2010 | Onkyo TX-SR606 Receiver

1 Answer

No audio from pc connected using hdmi


Are you not getting audio to the television speakers and the onkyo reciever speakers when connected HDMI thru the reciever or just the television. If it is just thru the television then it is because the reciever is grabbing the HDMI audio signal and converting it so it does not reach the TV. If it is both then try changing the HDMI signal output from PCM to DOLBY DIGITAL on the computer. Your reciever may not be able to process the PCM signal of the computer. Does the reciever show a PCM or DOBLY DIGITAL display when HDMI is hooked up to it?

Oct 03, 2009 | Onkyo TX-SR606 Receiver

1 Answer

Onkyo TX-SR606 Reciever - 20 sec after power on, screen is green


The HDMI version in your receiver is 1.1 or 1.2 which will not pass video as it should. It's not Onkyo's firmware at issue, it's HDMI and in all receivers up to 2008 model year this is a very heated problem! The only fix is to run FIOS directly to the TV via HDMI and run it's audio to your receiver with Digital Coaxial or Optical. Hope this helps

Jun 11, 2009 | Onkyo TX-SR605 Receiver

1 Answer

Unsure of audio setting using Onkyo TX-SR606 connected to PS3


The PS3 should default to the DOLBY DIGITAL sound output so your ONKYO should be setup to the Digital input, TV logic is a matrix similated multi-channel and I doubt if any PS software is in the DTS audio format, look at your game software disc`s and they will inform you of the audio capabilities.

Feb 20, 2009 | Onkyo TX-SR606 Receiver

1 Answer

Can someone tell me what the audio setting on the Onkyo TX-SR606 should be when the PS3 passes the signal as full multi-channel. My receiver always seems to say something different i.e. Dolby Digital or TV...


If you're running an optical cable from the PS3 to the receiver, best quality would be through the Dolby Digital, because that broadcasts in 7.1 HD Audio Format. There should be a way to get a default setting when the optical input is detected in your receiver.

Feb 20, 2009 | Onkyo TX-SR606 Receiver

1 Answer

ONKYO TX-SR606 Single output to TV


Hi there. for your receiver, the only time it can upconvert is when you go out as HDMI. In your current hookup (component out to tv) the signal from your cable (using a composite) will not be able to pass through the component cable. This means you either have to hook up your cable box using a component cable as well or add a composite cable (yellow) from monitor out of the receiver to the tv. Page 22 of the manual will show a diagram of the video signal flow. hope this helps.. ^_^

Dec 02, 2008 | Onkyo TX-SR606 Receiver

Not finding what you are looking for?
Onkyo TX-SR606 Receiver Logo

4,980 people viewed this question

Ask a Question

Usually answered in minutes!

Top Onkyo Audio Players & Recorders Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

 Grubhead
Grubhead

Level 3 Expert

5151 Answers

The Knight
The Knight

Level 3 Expert

74383 Answers

Are you an Onkyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...