Question about Insignia NS-LTDVD19-09 LCD TV

1 Answer

Comes on for 5 seconds then loses power

When you plug it in the red standby light comes on when you power it up the standby light turns blue and the tv comes on for about 5 seconds after that it goes completely dead with no standby light at all 2 seconds after that the red standby light comes back on..

If I repeat this over and over sometimes I get lucky and the tv will stay on long enough to watch a movie,

I looked every where for help to resolve this issue but with no luck.

Anyone have a service manual or knowledge of this problem?

Posted by on

  • 1 more comment 
  • Matthew Albert
    Matthew Albert Sep 11, 2009

    This is a Insignia ns-ltdvd32-09 LCD TV

  • Matthew Albert
    Matthew Albert Sep 14, 2009

    Fixed ended up being 4 caps on the powerboard

  • Matthew Albert
    Matthew Albert Sep 30, 2009

    It was 4 bad cap's on the power board

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 525 Answers

Bad connection

Posted on Sep 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bluetooth wont charge or power on. when charging the red light comes on. once disconnected from charger it wont come on


Indicator Lights:
1.Headset Status Headset Indicator Light
2.Powering on Steady blue, then intermittent flashes
(changes to standby mode)
3.Powering off Red appears and goes off
4.Standby Blue intermittent flashes
5.Charging battery Red solid light. Light indicator turns off when
battery is fully charged and headset is off.
6.Low battery Triple red flashes
7.Pairing mode Blue/red alternating flashes
8.Missed call Purple flashes. Press the call control button
to cancel flashing light.
9.Incoming call Triple blue flashes when ringing.
Power on and off:
1.Turn on the headset Press and hold the call control button until the
indicator glows blue. You will hear ascending
tones.
2.Turn off the headset Press and hold the call control button until the
indicator glows red. You will hear descending
tones. When power is off, indicator stays off.
If none of this is helpful then it may be that your battery is dead, if that is the case then you will need to replace the whole headset. The battery's are not replaceable.

Good luck from Headsets Direct!

Sep 21, 2011 | Plantronics Explorer 220 Bluetooth Headset...

1 Answer

I turn on my ps3 and there is no menu when it comes on. just a blue screen where the menu should be.


This is because the PS3 software has become corrupted. Follow these steps to fix it but be warned, you will lose your saved data!
1. Turn the PS3 off into standby (Red light on)
2. Press and hold the power button, it will beep as soon as you press it, then again 5 seconds later then once more and turn off. Release the power button when the PS3 turns off.
3. Press and hold the power button again. It will beep as soon as you press it, then again 5 seconds later, then it will beep twice quickly. Let go of the power button when you hear the 2 beeps.
4. The console will now boot into the recovery menu. Do as the screen tells you and connect a controller up via a USB cable and press the PS button.
5. On the next screen choose option 5, "Restore PS3 system". This will then reinstall the PS3 software and cure your problem.

Hope this helps

Aug 10, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

Red light comes on but the shuts off?


Mine did that and it really pised me of, sony told me to turn the power switch onthe back of the console on, when the stand by light comes on to push and hold the on button for at least 3 seconds until you hear a second set of beeps. This however didn`t work so I sent it back to Sony Australia and got it fixed up no worries.

Oct 11, 2008 | Sony Playstation 3 (PS3) Console

1 Answer

On my PS2 thin the red standby light is on and I push the button to turn it on, the light turns green like usual, but only for a second and then the light completely shuts off as if it was unpluged, after...


Try pulling the power adaptor out of the back of the ps2 ,then make sure no dust or debree is in the part that plugs into the ps2 then plug it back in and make sure its attached firmly. The ps2 should turn on now

Jul 12, 2008 | Video Game Consoles & Games

Not finding what you are looking for?
Insignia NS-LTDVD19-09 LCD TV Logo

538 people viewed this question

Ask a Question

Usually answered in minutes!

Top Insignia Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Cindy Wells

Level 3 Expert

5097 Answers

Are you an Insignia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...