Question about Sharp AL-1655CS Laser Printer

Open Question

Sharp al-1655cs has uniform vertical lines across the copy.

Have uniform vertical lines across the copy. cleaning the glass has no affect

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset L1-00 error for Sharp AL-1566


You need to remve the copy glass and clean it thoughly.
make sure it has that sticker the glass come with which has the marks for A4,LTR etc.
also the scanner must be in it home position.
but the cardinal thing is for the glass to have it accessory.

Jul 12, 2011 | Sharp AL-1655CS Copier

1 Answer

Error code E7-11


CCD drive circuit (CCD PWB, ASIC harness) trouble
Copy lamp lighting trouble (Copy lamp, inverter PWB)

OR the scanner shaft is dirty. Clean it and re-oil it with 3n1 oil.

Jul 17, 2009 | Sharp AL-1655CS Copier

1 Answer

Sharp AL 1655CS Grayscale Copier prints with black lines


Lines on copies can come from the optict area, charge grid and comb or the fusing roller. Stop the copy halfway through the cycle and see where the line starts to appear. If you see it as much as you do the rest of the print, it is either optical or in the drum charge unit.

Jun 26, 2009 | Sharp AL-1655CS Copier

2 Answers

AL-1642CS


try to clean the cover glass at the top of the copier with alchol.
be sure that ther is no any dot or lines on top of the glass specialy the right side.ok

Apr 16, 2008 | Sharp AL-1642CS Copier

1 Answer

Black lines running vertically through resulting copies


Clean the scanner glass. a small particle will cause this to happen.

Apr 07, 2008 | Sharp AL-1655CS Laser Printer

1 Answer

Top feeder of AL-1655CS


that is a dirty glass. The 1 inch or less wide glass on the left side of the machine has a very small spec on it.
You can clean it with a regular piece of paper and alcohol. Don't be afraid to clean it with some decent pressure.
The reason why you get the line in the feeder and not off the glass is that when you run a copy off the glass the lamp scans the immage, when you run through the feeeder the lamp parks under the glass and the movement of the document makes the print.
You may have some white out, or just some ink off an original on that piece of glass, but keep that clean.
Most people don't think that small piece of glass has a purpose, but it does. Sometimes the blot on the glass is so small you cant see it, and you need to remove that glass and hold it up with a piece of paper behind it to see the spot. It can be a very very small spot. But that is where your issue is.

Mar 10, 2008 | Sharp AL-1655CS Laser Printer

1 Answer

Single line printing in copy mode


CLEAN OFF GLASS ON TOP WITH WINDEX THEN RETRY COPIER

Jan 17, 2008 | Sharp AL-1655CS Laser Printer

1 Answer

Installed new drum


dark lines is probably caused by the thin glass of the copier. test by making copy on glass, does it have lines? if no look carefully at the small 1" glass there is probably some ink dots or white out or something on it, clean with alcohol and try.

fish scales uniformly are coming from the fuser, ( where it gets hot as its coming out) check.You already changed drum which was a posssibility.

Also check the toner and see if it is solid black.

Dec 03, 2007 | Sharp AL-1655CS Copier

Not finding what you are looking for?
Sharp AL-1655CS Laser Printer Logo

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

k24674

Level 3 Expert

7993 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...