Question about Vertex Radio Communications

1 Answer

Yaesu ft-270 power on err is displayed on lcd

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 905 Answers

This usually indicates a problem with the firmware, or the radio thinks that it is connected to a computer but it isn't. Basically, it is failing self test.

It might also be due to corrupted memory as well. You can reset the radio by popping the door off the bottom of the unit, and turning the switch marked backup off. Then apply power to the radio, and turn radio on. Everything has just been reset, and with a bit of luck, might begin to act like you would expect. The Backup switch turns the memory battery on and off. If it is dead, it may need to be replaced before the radio loses power again. See below for link to manual.

Posted on Sep 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why is SAVE always flashing


That is the battery saver feature showing that it is active.

May 25, 2016 | Yaesu Ft-270r Vhf Ft 270r Ft 270 R

2 Answers

I am getting a "Err" message when trying to transmit


Almost always a programming issue. Somehow, the transmit frequency is not enabled or programmed correctly. Always include all the zeros when programming these. The decimal point is critical also.

May 24, 2016 | Yaesu Radio Communications

1 Answer

Yaesu 270 not transmitting nor receiving


Hi this can be down to many reasons, radio keypad locked, receive on tone squelch, set on "Relay" or "Repeater", or even radio failure. Without the radio I cannot help, but that may give you some ideas.

Feb 14, 2015 | Yaesu Ft-270r Vhf Ft 270r Ft 270 R

1 Answer

Yaesu ft270 service manual


Try www.mods.dk for the manual. My guess is that you will find both the user manual and service manual there for free.

Apr 28, 2014 | Yaesu Ft-270r Vhf Ft 270r Ft 270 R

1 Answer

People can hear me but i cant hear them


I'm taking a long shot at checking the receive PL tone. Make sure that it's turned off and try it

Feb 07, 2014 | Yaesu Ft-270r Vhf Ft 270r Ft 270 R

1 Answer

No sounds output heard,,,same as in mute status,,how to solve it?


Be sure the CTSS tones are either set to the same value as the transmitter, or you have it set for "carrier squelch".

Dec 11, 2013 | Yaesu Ft-270r Vhf Ft 270r Ft 270 R

1 Answer

I need an operator manual for Aviator Pilot


The VXA-210 manual is available for free at the Yaesu.com web site.

Feb 13, 2013 | Yaesu Ft-270r Vhf Ft 270r Ft 270 R

2 Answers

My Yaesu FT 270 R AA battery pack is corroded. The radio turns on if plugged into the wall, but not with the power pack (with fresh batteries). Suggestions, please?


contacts are covered with the corrosion as maybe the internals. Take a dremel tool with a wire brush and clean the contacts, or toothbrush with baking soda and water. Make sure to not get too much water inside the radio. You can also go to Radio Shack and get some contact cleaner spray to use.

Jan 26, 2013 | Yaesu Ft-270r Vhf Ft 270r Ft 270 R

1 Answer

I need lcd display for yaesu ft 2500m can you supply one?


that would be from Yaesu ONLY item. and they are prob gonna want a receipt to verify ownership so its not stolen. just fyi

Sep 23, 2009 | Radio Communications

1 Answer

Yaesu/Vertex FT-51R Repair


You can order the parts from Yaesu or your local Yaesu dealer can do it for you.

Jul 14, 2008 | Vertex FNB-33, YAESU,FT-11R,FT-41R,FT-51R,...

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

436 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vertex Radio Communications Experts

Steve

Level 3 Expert

3287 Answers

eradiostore
eradiostore

Level 3 Expert

1654 Answers

k24674

Level 3 Expert

7993 Answers

Are you a Vertex Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...