Question about Televison & Video

2 Answers

I would like to make my CyberHome DVD 229 region free, but cannot find the code anywhere.

Posted by on

  • 1 more comment 
  • blakewh Sep 11, 2009

    Pressing menu shows "Disc not ready" 1 and 9 show nothing.

  • blakewh Sep 11, 2009

    Pressing menu shows "Disc not ready, 1 and 9, still do nothing. There is no disk in the tray.

  • blakewh Sep 12, 2009

    Discontinued makes sense, that must be why they were blowing them out for less than $20.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 13,433 Answers

There doesn't seem to be a code for this player.

But what you can do if you have a computer a dvd burner on it, you can rip the protected DVD into your computer and remove the protection from it, then burn the unprotected movie into another DVD without a region code and the movie will play on your DVD player.

http://www.mrbass.org/dvdrip/ You can also watch the movie on your computer having removed the region code from it.

Then you can burn it to a new disk, this free burning program can do it - http://cdburnerxp.se/

Posted on Sep 12, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 146 Answers

Try this following hack it works on the 300 series but should work on your 229 too...

Power up, no disk in. Status says READ then INSERT DISC.
Press MENU (status reads invalid key icon)
Press 1 (status reads invalid key icon)
Press 9 Menu is displayed.

(make sure to hit menu 1 9 fast)

Press ENTER on the region, digit turns to "-"
Press 0
Press ENTER again
Press EJECT to clear the special menu.

The 0 region means play all.

Try it and let me know if it works !

Posted on Sep 11, 2009

  • DarkStar2 Sep 11, 2009

    Make sure there is NO disc in the tray - press MENU 1 9 consecutively, not at the same time meaning press menu then quickly 1 then quickly 9.



    perssing menu should show the error message as stated above.



    If this does not work, try entering the code while the tray is open.



    if still does not work, I have a few more coes for you to try.

  • DarkStar2 Sep 12, 2009

    Sorry for the delay in getting back - I tried asking a few contacts, seems the 229 is discontinued / phased out ?



    Click this link

    http://www.videohelp.com/dvdhacks?dvdpla...



    This brings you straight to the page in question, it lists several cyberhome players, click on the ones that say Cyberhome CH-DVD-xxx try them one by one, maybe one of those will work for your 229.



    Otherwise if nothing works from there you are out of luck - this particular model's firmware might be locked and not allow region code modding.



    There is another alternative - use a free program called DVD Shrink, with that you can remove the region coding protection your DVD and burn it to another DVD, so you won't have to hack your player - and it's free.



    Let me know how it works out.





×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Cyberhome AD-N212 Region Free Fix Would you like to unlock your Cyberhome...


Cyberhome AD-N212 Region Free Fix

efc99c7.jpg
Would you like to unlock your Cyberhome AD-N212 DVD player to Region Free?

Follow these steps to unlock your Cyberhome AD-N212 DVD player:

  1. Open the drive tray
  2. Press the 7 button on your remote control
  3. Press the 6 button on your remote control
  4. Press the SEL button on your remote control
  5. You will now enter the hidden setup page
  6. Change the player toany Region or set it to Region Free by entering 13 as the country code.


Your Cyberhome AD-N212 DVD player is now Region Free.

I hope that helps.

on Apr 25, 2010 | Televison & Video

1 Answer

Need remote code


try this method THIS METHOD WORKS FOR THE CH-DVD 300, CH-DVD 300S, AND CH-DVD 320
1. Switch player on, making sure that there's no disc in the tray.
2. Close tray.
3. Using the remote control, key in the following: MENU, 1, 9.
4. A menu will appear with the region option near the bottom of the screen.
5. Press ENTER, enter the desired region (0=REGION FREE )AND PRESS ENTER again to save the desired region.
6. Press OPEN/CLOSE. Hope this helps you with your problem
:

May 02, 2009 | Cyberhome CH-DVD 300 DVD Player

1 Answer

Need code to adapt to Toshiba HD flat screen TV


If it's a regional code that you're looking for


Switch player on and make sure there is no disc in the tray.
CLose tray and press menu,1,9.

A menu should appear with the region option at about the third line from the bottom. Press enter and enter the region you want. Press enter again to memorize the code. Next press open/close. Put in your movie and enjoy.

if your movie starts playing in black and white:

To always watch in color if you do not have a Multisystem TV set Video output to Your TV system USA TVs- NTSC, Europe TVs PAL. This way You should always get color on Your TV

Hope it's what you were looking for. Good luck!

Mar 30, 2009 | Cyberhome CH-DVD 300 DVD Player

5 Answers

Need a universal remote code for a cyberhome dvd 300


Cyberhome 300 DVD player codes... 20816 20874 21023 21129 21023 worked on my comcast remote for all the DVD PLAYER FUNCTIONS!!! =)

Jan 14, 2009 | Cyberhome CH-DVD 300 DVD Player

1 Answer

Cyberhome dvd player ch-dvd 300 What region code is this dvd player? can it play region 2 dvd's?


Dear friend,
Try this method to change the region.
1. Switch player on, making sure that there's no disc in the tray.
2. Close tray.
3. Using the remote control, key in the following: MENU, 1, 9.
4. A menu will appear with the region option near the bottom of the screen.
5. Press ENTER, enter the desired region AND PRESS ENTER again to save the desired region.
6. Next press OPEN / CLOSE.

Nov 18, 2008 | Cyberhome Televison & Video

4 Answers

Making dvd player region free


I would like to make my soniq PD100 dvd region free.

Mar 08, 2008 | Televison & Video

1 Answer

Need 3 digit remote code for Cyberhome DVR 1600 PLEASE HELP!!!


Don't know if this is what your looking for but give it a try.





How to convert your CyberHome CH-DVR 1600
into a Region Free DVD Player

There are two versions of the Cyberhome DVR 1600 which require different methods of changing the Region Coding
CH-DVR 1600 MU
  1. Power Up the unit with NO Disc in the tray.
  2. Press the Setup button on your remote control
  3. Press the 1 button on your remote control
  4. Press the 6 button on your remote control
  5. Press the 9 button on your remote control
  6. Press the 5 button on your remote control
  7. Press the 1 button on your remote control
  8. Press the 8 button on your remote control
  9. Select the region code with the Number buttons or the Navigation Buttons on your remote control. 0 (Zero) for Multiregion.
  10. Exit the menu
  11. Press the Power Off button on your remote control
  12. Press the Power On button on your remote control
CH-DVR 1600 ZU
  1. Power Up the unit with NO Disc in the tray.
  2. Press the Setup button on your remote control
  3. Press the Red Record button on your remote control
  4. Press the 8 button on your remote control
  5. Press the 1 button on your remote control
  6. Press the 0 button on your remote control
  7. Press the 5 button on your remote control
  8. Press the Red Record button on your remote control
  9. Select the region code with the Number buttons or the Navigation Buttons on your remote control. 0 (Zero) for Multiregion.
  10. Press the Setup button on your remote control

Jan 02, 2008 | Cyberhome DVR 1600 DVD Recorder

5 Answers

Need remote codes


I have a CyberHome CH-DVD-300 unit with a Dishnet remote. The remote code that worked for me is 724.

Sep 24, 2007 | Cyberhome CH-DVD 300 DVD Player

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73619 Answers

Cindy Wells

Level 3 Expert

5056 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...