Question about Canon MultiPASS F80 All-In-One InkJet Printer

1 Answer

Canon MP730 alarm light continues to flash: "Check printer press resume key" tried it doesnt work. Unplugged it disconnected everything and re-connected same problem. Ink cartridge doesnt return either.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,041 Answers

Hi you can try this.

To reset waste tank full error in MP730.

1. Hit the "menu": Key
2. Hit "Copy" Key
3. Hit "#" Key
4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading
5. Hit the "3" button- this will bring up Eprom Clear
6. Hit "0" button
7. Hit the "Stop" button


Can only try then your printer go on longer but some time the other you will need to clean out the waste ink it inside the printer all got to be open up to do this.


Ok I have put a MP-Tools in my website for you to try out this tools are for reseting your inks plus it can do much more.

Click on the link to download it.

Click Link = http://www.4all2sell.com/reset-tools/MPTool.exe


Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks

Posted on Feb 26, 2010

  • Marjorie Kemp Oct 09, 2010

    I have the same problem listed in this post.
    I tried to follow your steps listed above and it all goes well until "5. Hit the "3" button - this will bring up the Eprom Clear"
    When I hit the "3" button it says Please wait and then "3: Print - [1] - [9]

    Your help is the best so far, and it seems like MANY people have this problem so I'd sure appreciate your further attention.

    Thank you.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Print head will not move at all but i can slide it back and forth by hand. and the alarm light flashes and the srceen reads check printer press resume key


This will either be a problem with the printhead drive motor, the ribbon cable going to the printhead, or even worse...a problem with the circuit boards inside the printer. It will need to go into the shop for repair.

Aug 13, 2009 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

ALARM BUTTON


Hello there please try see if it work

To reset waste tank full error in MP730.

1. Hit the "menu": Key
2. Hit "Copy" Key
3. Hit "#" Key
4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading
5. Hit the "3" button- this will bring up Eprom Clear
6. Hit "0" button
7. Hit the "Stop" button


Can only try then your printer go on longer but some time the other you need to clean out the waste ink it inside the printer go to open up all.



Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks

Jul 09, 2009 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

Alarm light flashing saying check printer resume


It may be waste ink full

To reset waste tank full error in MP730.

1. Hit the "menu": Key
2. Hit "Copy" Key
3. Hit "#" Key
4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading
5. Hit the "3" button- this will bring up Eprom Clear
6. Hit "0" button
7. Hit the "Stop" button


Can only try then your printer go on longer but some time the other you need to clean out the waste ink it inside the printer go to open up all.



Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks

Mar 24, 2009 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

Horrible grinding noise


The problem sounds like a broken or stripped gear in the printer. If the unit is under warranty I would contact the authorized repair station for that printer in your local area.

Nov 10, 2008 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

Check printer & alarm flashing.I cannot get it to reset.


Electric connection terminals scratched? Maybe short circuit. Use warranty from purchase for repair.

Sep 29, 2008 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

Alarm light flashing, please wait message


Can only try

To reset waste tank full error in MP730.

1. Hit the "menu": Key
2. Hit "Copy" Key
3. Hit "#" Key
4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading
5. Hit the "3" button- this will bring up Eprom Clear
6. Hit "0" button
7. Hit the "Stop" button


Can only try then your printer go on longer but some time the other you need to clean out the waste ink it inside the printer go to open up all.



Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks

Jun 10, 2008 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

Canon mp-730 print head does not move


it seems you open or unscrew the printer.
this may happen if the mother board has no nigative pole.
you have to reset the mother borad.
cannot do that from the available options
the reseting procedure is to take the motherboard out and you have to shortcut the battary for 10 seconds.
re install it , and try it

Feb 18, 2008 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

Alarm light on. F80


This worked for me on an F60 and someone else on an F30. Re: Check Printer error message on Canon MultiPass by watsonk (6/7/05 11:16 PM) reply + / - It could be due to "waste tank full" alarm; you may need to reset the waste tank counter. I found a reset sequence for a MP730 printer in this website that works for F30 as well. Try: Resetting the Waste Ink Volume Counter 1) Enter SERVICE MODE.--- By pressing Menu-Copy-# 2) Select TEST MODE. 3) Select [8] PRINTER TEST in TEST MODE. 4) Select 3. [EEPROM CLEAR]. 5) Select 0. [INK COUNT]. 6) Press the [OK] key. 7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key. Skip step (6) since there is no [OK] key on F30 printers.

Sep 29, 2007 | Canon MultiPASS F80 All-In-One InkJet...

Not finding what you are looking for?
Canon MultiPASS F80 All-In-One InkJet Printer Logo

591 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1921 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...