Question about Emerson TS1997 19" TV

2 Answers

Tv just quit working - Emerson TS1997 19" TV

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Master
  • 1,632 Answers

This is the best solution for your problem as a 40 year experience with wires etc. Go to the source of your cable signal connector . Open it and clean the terminals with emery paper , sand the end of the cable shiny clean from corrosion , get a new barrel connectors with gold terminals if possible lengthen the ends of the cable , insert and tighten good, use thick rg-16 or rg 40 cable with good insulation ends crimped professionally with a crimpier or buy ready made , not from dollar store. Get a gold plated professional splitter if you need one or two , it will cost about 15 or more each . Make the cable runs as short as possible, using the thick good cables. If needed get a signal magnifier. From radio shack or the source etc. Connect them good and tight . Ground the splitters . Problem solved , you will get crystal clear channel 2 to 7 including 3 and 4 . Isolate the TV cable from other cables and power wires. Vitally

Posted on Apr 15, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have an emerson 19' hdtv less than 2 years old when the power is turned on whin in 10 sec. it turns itself back off what can i try to fix it?

Posted on Jul 19, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello, the remote has quit working for the volume


Ur free air DTV converter box have problem taking in the programs codes belong to ur tv,belong to the remote.Turn the converter box off/on to reboot ur DTV converter box.Read ur owner manual,re enter ur tv codes,belong to ur tv.U tv should be up and running again.

Jul 31, 2010 | RCA Televison & Video

2 Answers

My lg 42pc5d tv remote sensor quit working. I am


Check on the back of the TV to see if you have a "remote in" port. It will look the same as a 3.5mm headphone jack. Unplug the TV and plug a pair of headphone into the port and then remove it. Do this several times to breakup any debris that may have gotten into it or corrosion that may have occurred in the port. If something is in the port it will disable the standard remote sensor on the TV.

Jun 04, 2010 | LG 42PC5D Television

2 Answers

My 36' RCA TV JUST QUIT WORKING. TURNED ON POWER


A shorted horizontal output transistor or shorted flyback. If the flyback is shorted replace also its HOT.

Apr 05, 2009 | RCA F36650 36" TV

1 Answer

My tv suddenly quite working with the remote. I


Will the TV turn on using the power button on top of the TV itself?If not,open the back of the TV,and look at the can shaped items called capacitors on the circuit boards.If any of them have the tops,or bottoms bulged out,they need to be replaced.This should get it working again.I hope this helps.If you have any questions,please let me know.Thank You very much!
Tyler

Feb 25, 2009 | TruTech PLV16190 Television

1 Answer

RCA TV quit working


is it back projected if so lamp needs changing if not power supply faulty

Dec 08, 2008 | RCA HD52W58 52" TV

1 Answer

TV Remote control


my remote control quite working - I have replaced batteries, but it still will not even turn on the tv.

Oct 12, 2008 | Toshiba MV13L3 13 in. TV/VCR Combo

1 Answer

MY TV WANT COME ON


go to radio shack or target before they close and buy an rca brand universal remote you wont even have to program it to your tv good luck

Sep 22, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Tv stopped working


Good Day, pjljr2000;
Sounds like you have a dead set. First try rebooting TV by unplugging for 5-6 minutes, make a/c outlet has power.
There are too many things on your model that could be the problem. If what I suggested didn't help and if you are not electronically inclined then I would recommend that you contact a factory authorized dealer to service the TV.
Good Luck, big IRISH.

Jul 04, 2008 | RCA P52926 52" Rear Projection Television

1 Answer

Remotes quit working


Take your Tv to the Technician to check for you if the sensor is working properly.

Mar 24, 2008 | Symphonic ST419E TV

Not finding what you are looking for?
Televison & Video Logo

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74468 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

 Grubhead
Grubhead

Level 3 Expert

5190 Answers

Are you an Emerson Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...