Question about Coleman Sport & Outdoor - Others
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Go on youtube, you will find some excellent videos on how to....on a range of tents. I saw the coleman sahara tent on a video last year as I was considering buying one! Good luck!
Posted on Jun 03, 2009
Wow, thats a monster tent. I'll get you most of the way there, but I may miss a thing or two
Lay it down, stretch it out and peg it. That will save you a ton of time.
Next, find the four longest poles. These are the supports. Two on each side of the door, crossing diagonally to the rear. Put one end of the poles in the holes and bend until you can get the other end in. These poles should slide through sleeves in the tent. Once these are up, the rest are "extras." The tent has hooks to hold the poles to the tent.
You have two poles of equal lengths for the side windows. Again, route them thru a sleeve, bending them into the holes on either side of the windows. I can't tell, but it looks like you have a pole system for the front door too. Somehow these poles go next to the main support poles and meet up under the rain cover.
Next, lay the rain cover on top of the tent. It should connect by bungies to the bottom of the pole support holes. There might be a pole or two under the rain cover, but above the tent for support. If so. look for a small pouch that a pole could slide into on the bottom side of the rain cover. You'll run the pole from the pouch to another pouch (all under the rain cover).
Don't worry about strings or extra poles. These are for high wind. Pegging the tent down is good enough.
Posted on Jun 09, 2009
the instructions are useless anyway. you put the red poles through the 2 side bedrooms. the black rods and the black poles with the bends in join together and go diagonally through the middle of the tent. the yellow rods join together with the black poles with the yellow tape round the ends and u fit these from the inside of the front and back entrance then when the tent is up you just hook the bedrooms in. hope this was usefull
Posted on Oct 23, 2010
1. Usually you can go to the website of the manufacturer and get a sheet of instructions, or you can get them from a dealer.
2. Try it. You might find that it is obvious once you get it spread out. I bought one with no instructions once, and there was only one step that took a while to figure out.
3. Try a friend or neighbour who is an experienced camper. They might be able to figure it out pretty quickly.
Posted on Jan 26, 2011
Tips for a great answer:
Jul 08, 2012 | Coleman Cobra 3 Three Person Backpacking...
May 31, 2011 | Coleman 10' X 10' Sundome Tent 9160K101
Mar 23, 2010 | Coleman 10' X 10' Sundome Tent 9160K101
Mar 20, 2010 | Coleman 17' X 9' Weathermaster® Elite...
Feb 02, 2010 | Coleman Montana Tent 6 Sleeps
Jul 26, 2009 | Coleman Sundome 7 X 5 Dome Tent
Jun 07, 2009 | MSR Family Tents
May 23, 2009 | Coleman 10' X 10' Sundome Tent 9160K101
Apr 21, 2009 | Coleman 10' X 10' Sundome Tent 9160K101
Dec 15, 2008 | Coleman 10' X 10' Sundome Tent 9160K101
84 people viewed this question
Usually answered in minutes!