Question about Food Mixers

Open Question

Good morning: I have a Moulinex type 730 Code 110 hand held mixer. I just love it but the blender arm broke away from the casing of the sleeve and keeps coming off. Can I replace this one part. I have the mixer attachment and one other which I don't really know what it is used for, (with the broad blades on the bottom) can I replace that one mixer sleeve?

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 405 Answers

SOURCE: Braun Vario 280 Watt type

HI.This steps might be as well helpful.let me just clarify that you can't even manually twist the shafting.If the motor is working an yet it will not turn the shaft.Tha shafting bossing might as well been broken misallign inside..Better remove the cover by unscrewing it and then try to observe how the motor works.If it really does turn when ever it is plugg on to the source.Observe also misallign bosssing that connects the shafting and the motor's rotor.Thank you for choosing FIXYA.

Posted on Aug 16, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a replacement bowl. LOVE the mixer!


Contact the manufacturer and tell them what you need. Normally the will send a complete unit instead of just the bowl because they can afford it anyway rather than split up a unit. This has always been the case for myself when needing a replacement part of that size.

Nov 15, 2014 | Rival Stand Mixer 12 Speed Model...

1 Answer

Braun Vario 280 Watt type 480 hand held blender. The bowl top that the hand mixer fitsd into is frozen. The hand held motor works but the shaft in the top that turns the blade is frozen. I don't...


HI.This steps might be as well helpful.let me just clarify that you can't even manually twist the shafting.If the motor is working an yet it will not turn the shaft.Tha shafting bossing might as well been broken misallign inside..Better remove the cover by unscrewing it and then try to observe how the motor works.If it really does turn when ever it is plugg on to the source.Observe also misallign bosssing that connects the shafting and the motor's rotor.Thank you for choosing FIXYA.

Aug 16, 2011 | Braun M880 MultiMix Hand Mixer

1 Answer

I can attach the immersion blender attachment but it does not turn on. The machine works fine with the mini-chopper attachment or the beaters. How can I fix this?


Hi
Make sure you use the pulse function of the power switch. Only this position (forward, away from you) will activate the immersion blender, and then at full speed only.

Feb 09, 2011 | Braun M880 MultiMix Hand Mixer

1 Answer

I seem to have lost the instruction manual for my mixer. I would like to use the immersion blender, but I can't figure out how to attach it to the mixer body. The shaft on the blender is too short to...


Hi
The blender does not attach to any of the two holes for the whisks.
You need to push back the sliding cover in the center, bottom part between and behind where the whiskers attach. This will uncover a third attachment possibility, where you insert the blender and twist it a quarter turn into place.

Dec 13, 2010 | Braun M880 MultiMix Hand Mixer

1 Answer

Tipped over my blender, broke the black plastic piece that raises and lowers the top, and now it is stuck in lower position. Won't move.


Blender? This is a form about Kitchenaid mixers . . . assuming that's what you have,and it is a stand type mixer, look at this page:

http://shared.whirlpoolcorp.com/assets/pdfs/literature/Repair%20Part%20List%20-%208212369.pdf

And you will see the linkage which was bent/broken. Hopefully you will be able to either straighten the bent part or replace it if it is broken.

Mar 27, 2010 | KitchenAid KSM90 Ultra Power Series Stand...

1 Answer

Can't get the drive coupling off my Bosch Universal to replace it


I have had my Bosch Universal Mixer with the Blender and Food Processor Attachments since 2005, and I've loved it since the day I got it... that is, until the blender broke while my son was crushing ice to make slushies...

I figured out the "drive coupler" was stripped and needed replacing, but I couldn't figure out how to take apart the "blade assembly" which includes the "drive coupler" part...

My retailer, Pleasant Hill Grain, sent me the following email:

"I am not aware of any printed instructions for removing the old coupling and
replacing with the new. We recommend holding on to the blades with 1 hand and a
towel and using a needle nose pliers to unscrew the old coupling. You would put
the new coupling on in the same manner.
If these instructions do not work, I would suggest contacting the Service
Dept at Kitchen Resources in Utah. Their phone is 800-692-6724."

I still couldn't figure out how to take apart the blade assembly, so I did end up calling the distributor, Kitchen Resources...

Dave, the tech @ Kitchen Resources, answered my call on the first ring...

Once I explained my problem, he started giving me the same instructions Pleasant Hill Grain gave
me... I explained to him that holding the blades tightly wasn't working for me.

As it turned out, holding the blades did not secure the drive shaft because
the drive shaft was broken off INSIDE the blade assembly - which is why I could
not unscrew the old drive coupling part.

Dave's next question revealed the true issue at hand... my Blender Attachment has the blade assembly made of plastic - they switched to plastic
in 2005 because the metal assembly turned black in dishwashers.

Bosch just recently went back to using metal for this part - apparently the
plastic blade assembly didn't hold up.

Kitchen Resources - the U.S. Bosch Distributor - is sending me a new blade
assembly - no charge, he said it's covered under warranty. Woo Hoo!

Best of all, I hadn't yet purchased the replacement drive coupling part, because
I wanted to know how to go about replacing the part before ordering a new part.

With shipping this part would have been a $50+ repair - you have to love
customer service of that caliber!

[Aside: You really don't need to ever put this part in the dishwasher - wash
the inside with by putting hot water and perhaps a little dish detergent inside
the blender and turning it on - rinse the outside under the sink... no
dishwasher needed! ]

Mar 23, 2009 | Bosch MUM6610 Universal Series Stand Mixer

3 Answers

Power cord for GE hand held mixer


I have a gold mixer also, My wife loves it. The cord went
and was unfixable. I found one on this website abtecparts.com.
The cord was $5.99 plus shipping. Good Luck
Pat

Mar 18, 2009 | Food Mixers

1 Answer

Broken blender attachment


Wolfgang Puck Housewares Customer Service
800-275-8273
Monday - Friday
9:00 am - 4:30 pm Eastern Time

I would call the number above they should be able to help you out.

Aug 04, 2008 | Wolfgang Puck Stand Mixer

4 Answers

Bravetti hand mixer beaters


amazon for sure... take a look here: Enjoy Life Sweetest Moments with Sunbeam. I hope I have helped. cheers

Jan 13, 2008 | Food Mixers

Not finding what you are looking for?
Food Mixers Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Food Mixers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

eyecam

Level 2 Expert

94 Answers

yadayada
yadayada

Level 3 Expert

76673 Answers

Are you a Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...