Question about Konica Minolta magicolor 2300DL Laser Printer

1 Answer

I have recently moved my Magicolor 2300DL and since then all my prints are very streaky. I have enough ink in cartridges, but can't find any way of cleaning the page!! HELP

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 85 Answers

You will need to either replace or clean the drum. Open the side door and pop off the waste toner tank (that big huge thing with the CKMY sticker on it, you have to pull kind of hard at the top of it to get it to pop off) then flip up the big blue lever and squeeze the small black tab with the picture on it of it being squeezed on it and pull it out towards you. (best to do this in a dimly lit room as the drum is light sensitive especially in bright light or for long periods of time) then clean or replace the drum and you should be good to go. also on a side note if the drum life ever shows as being up on that model all it needs is a new fuse on the drum.

Posted on Sep 11, 2009

Testimonial: "Haven't tried yet, but will do so - just very grateful for the response!"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the ink cartridge?


Hello.

This printer is a laser jet printer - so you will be changing the multiple toner cartridges, not ink cartridges.

Page 56 starts the steps on how to replace the toner cartridges.

ftp://ftp.minolta-qms.com/pub/cts/out_going/manuals/2300dl/eg_user.pdf

The front of the printer opens to the right and exposes the toner cartridges for removal.

May 04, 2010 | Konica Minolta magicolor 2300DL Laser...

1 Answer

Our 2300DL is leaving streaks when printing


Out of one or more toners. If you have removed and replaced a cartridge in error the % remaining is reset to 100%. Try to determine which color is missing in your print out (usually black), and then follow menu instructions to replace that cartridge. The ends are color coded so be sure you change the correct one. This will insure the remaining cartridges % remaining is correct.

Jan 13, 2010 | Konica Minolta magicolor 2300DL Laser...

1 Answer

I have run out of one of the color red. Can I


My printer is printing very light........color ink cartridge is new for color but, black is getting low........what should I do.........do I have to replace black before its gone?

Oct 25, 2009 | Konica Minolta magicolor 2300DL Laser...

1 Answer

I have magicolor 2300 DL.I just replaced Cyan


make sure your cartridge is not stuck and pushed in all the way in printer. If it gets struck it will dump ink out and waste it.

Aug 19, 2009 | Konica Minolta magicolor 2300DL Laser...

1 Answer

Service Call: 17H Call Technical Support


refix ink cartridge and check there is not paper jam .

Apr 21, 2009 | Konica Minolta magicolor 2300DL Laser...

2 Answers

Konica Minolta 2300W ink smears


check the transfer belt..there is a reason why some used printers are sold on ebay!
be prepared for sticker shot.

Apr 08, 2009 | Konica Minolta magicolor 2300DL Laser...

1 Answer

FATAL ERROR


your printer is laser printer change toner cartridge right,
you may try
1) Open the front door and remove the toner cartridge.
2) you will see a small round hole near the colour toner cartridge
3) hold a screwdriver in that hole and the carousel will rotate freely. 4) Move the carousel round and remove each one of three cartridges at a time.
set back all cartridge close door.

Jan 29, 2009 | Konica Minolta magicolor 2300DL Laser...

1 Answer

Minolta 2300DL ghosting


Hi,

I just had the same problem with my 5430DL. It was a bad toner cartridge. The bad cartridge is at 73% full, and had not been a problem until recently. I had been troubleshooting and finally remembered that I had the old cartridge with toner still left. I swapped them out and no more ghosts. Swapped back and the ghosts came back. I have ordered another new toner cartridge and fully expect the problem to be resolved.

Jan 28, 2008 | Konica Minolta magicolor 2300DL Laser...

1 Answer

Cartridge Removal 2300DL QMS Minolta


magicolor 2300 DL procedures
a)From the display, select the menu “Engine”.
b)Select “Replace Toner”.
c) Select each color toner cartridge from this
menu to remove it.

Nov 26, 2007 | Konica Minolta magicolor 2300DL Laser...

Not finding what you are looking for?
Konica Minolta magicolor 2300DL Laser Printer Logo

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6161 Answers

Ben
Ben

Level 2 Expert

108 Answers

David Burkhart
David Burkhart

Level 2 Expert

210 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...