Have Epson Stylus 1290. Want self adhesive labels

Reset your Printer by following these steps for your Printer Model:

EPSON Stylus Color 900, 980
Pressing and holding LOAD/EJECT and CLEANING buttons, press POWER button, You will see blinking INK OUT led.
Release all buttons.
In 2-3 seconds time press and hold CLEANING button for 10-12 seconds.
EPSON Stylus Color 3000
Pressing and holding PAUSE, LF/FF and DOWN ARROW buttons turn on printer.
Release all buttons.
EPSON Stylus Photo 785, 895
Pressing and holding Maintenance and Roll Paper buttons, press POWER button, You will see blinking Error led.
Release all buttons.
In 2-3 seconds time until led is blinking press and hold for 10-12 seconds Roll Paper button, until all leds will blink.
EPSON Stylus Photo 890, 1280, 1290
Pressing and holding Maintenance and Roll Paper buttons, press POWER button, You will see blinking Power led.
Release all buttons.
In 2-3 seconds time until led is blinking press and hold for 10-12 seconds Roll Paper button, until all leds will blink.

Epson Stylus Photo 1290 Printer Drivers
Visit the above link. Select the Operating System you have on your PC and download the drivers.

Hope it helps! Good Luck!
Don't forget to convey your feedback
CreativeTECH

Hi,
You can download the printer driver and all other utility software from the following link
http://www.epson.co.uk/Printers-and-All-In-Ones/Inkjet/EPSON-Stylus-Photo-1290/Drivers-Support?defaultOSId=3

When you experience damage to the paper when feeding it means that it is hitting something in it's path. Open the printer and check the path of the paper for any foreign objects like torn paper, staples,and the like. And if you have printed any labels, part of the label maybe caught on one of the rollers.

hello,
this is becoming such a huge issue for many people with vista, the manufacturers just couldnt put out drivers fast enough, many only current to xp. Here is link that may help, http://tech.epson.com.au/downloads/product.asp

what you want is not possible. the Epson Stylus Photo 1290 does not use sublimation ink. it is strongly advised to only use genuine Epson ink to keep the print quality of your print head as high as possible.

Joy:
Once more have the printer to perform the ink nozzles cleaning.
If you are using a ontinuos ink system, place it at the same level than that of the printer.
With the printer in the "replace carrtidge position", put it OFF and by hand, clean the place at which the cartridge rest.
Good luck and merry christmas
emiliosan

This happens to me very occasionally. Shut down the computer completely, unplug the usb cable from the computer and reinsert. Unplug the usb cable from the printer and reinsert. Switch on the printer. Start up the computer.

Download Software maintenance and adjustment EPSON 12000 series Here

If the red light stays on then replace both your ink cartridges