Question about Maytag MAH6700AWW Neptune Front-Load Washer

1 Answer

How do I stop the error E2 code on my washer? I

How do I stop the error E2 code on my washer? I cannot do any laundry at all now

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,653 Answers

The E2 shows that there is a motor problem. This can be caused by having an extra heavy load in the machine so take some out and try it. It can also be cause by any iof the buttons being stuck so make sure they are all 'free'. If this fails then you will need to have a new motor and call a repair man unless you can do the job yourself.

Posted on Sep 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does the error code UL mean?


UL means UnLevel. To fix , open door of washer, and redistribute the clothing/laundry in the machine, and press start. It should start spinning again. Sometimes , if you have a overly heavy load of laundry above will not work. What I have done is, put my weight on the machine (upper body laying on the top) until the machine has extracted enough water so the machine will be balanced.

Dec 10, 2015 | Washing Machines

3 Answers

Error code h6


hi friend

hi think ur proggremed chip has been damged so u have to chage it or a timer ckt has a probelm so chenge it

Apr 05, 2008 | Daewoo DW500M Top Load Washer

1 Answer

What is E2 code for Hairy Bikers soup maker?


There are 5 pins on the socket in the base. on the back of that
socket there is a black strap that holds the wires in. it snaps off
and the wires drop out. you need two small washers remove the two screws push the wires replace the strap now put the two small washers the screws and replace job done

Mar 02, 2015 | Blenders

1 Answer

Duet washer f9 e2 code


Hi, Switch power off. Remove plug from socket, wait awhile then restart, as if first time use. If error persists try to contact manufacturer. All the best.

Apr 17, 2014 | Washing Machines

1 Answer

E2 error code aw-8990st toshiba wash


Toshiba top load washers have standard error codes. Depending on the display (2 or 3 digits depending on the model) it will either show E21 (or E23) or alternate E2 and -1 (or E2 and -3). Here's a list of most Toshiba washers error codes;

E1: Water doesn't drain in time or not at all
E21: Lid open
E23: Lid not locking
E31: Load imbalance
E32: Check E1 and/or E31
E5: No water coming in

You can try resetting to factory default by following the procedure: Power OFF, then pressing and holding the Super Spin Dry button, press power ON and it should beep 3 times.

Hope this helps

Jan 25, 2014 | Washing Machines

3 Answers

Whirlpool washer f3 e2 code


your main control board is having a problem need to have service rereplace it free of charge and the board has been upgraded

Sep 18, 2012 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

How to change the door switch


Hello.

Some Washer ranges are equipped with electronic displays that indicate the time of day and the oven's temperature when it's in use. The display also alerts users to error codes including PF, or power failure, and various letter and number combinations that correspond to issues ranging from electronic control malfunctions to problems with the oven door latch.
Related Searches:

F2 Faults

Washer F2 faults relate to temperature problems in the oven. In the case of the error E2-F3, F2 is the general fault code and E2 is the specific error code. An E0-F2 error indicates that the oven's temperature sensor is open; E1-F2, that the temperature sensor is shorted; E2-F3, that the oven temperature has exceeded the maximum rated 575 degrees Fahrenheit in "Cook" mode; and E2-F3, that the oven temperature has exceeded the maximum rated 950 degrees Fahrenheit in "Clean" mode.

Clear Error Code

If your oven display shows a letter/number combination, washer advises clearing the display. Press "UPPER OFF" or "LOWER OFF" on double oven models. On single oven models, press "OFF/CANCEL" to clear the display. If the code reappears, the manufacturer recommends contacting a professional service technician or contacting the Washer producer

Professional Service

The Tech Sheet included with Whirlpool ovens is meant for use by professional technicians servicing the unit. To address an E2 F3 error, a technician can check the oven's temperature sensor connection, measure the sensor's resistance and, if necessary, replace the sensor.

Thanks.

Dec 07, 2011 | Washing Machines

1 Answer

I am getting an E2 error on the display. The


either any of the key(button)is got stuck up prtessed or the motor of the washer is got weak.due to this e2 error code shows up.the washer works if the motor is weak but if there are more clothes in the washer and due to that motor cannot spin properly so it shows e2.First clean the washer internally after emptying it completely then check.if still e2 error then motor needs replacement . you can get new motor at www.repairclinic.com

Aug 30, 2009 | Amana Washing Machines

1 Answer

Power cuts off


The machine beeps E2 all the time. Actually E2 error code means washer door is not closed properly. However washer door does close properly, but the machine still beeps with showing E2 error code. Please help solve this problem.

Many thanks,

Robert

Jul 04, 2008 | Haier XQB60-91AF Top Load Washer

1 Answer

Error Code E1


Usually when the thermistor is repaired the high limit is replaced, I dont recall the E 2 except a manual is under the console

Jun 01, 2008 | Kenmore 3.8 cu. ft. HE3t Front Load Washer

Not finding what you are looking for?
Maytag MAH6700AWW Neptune Front-Load Washer Logo

1,197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...