Please clean the gold contacts of your memory card.Take any lead pencil. Take the eraser and rub it on the gold contacts
on the memory stick as if you are erasing writing on paper. Do this for
about 30 seconds or more until you get all the gold contacts. Put the
stick in the camera, switch to 'Setup', then turn the camera on. The
'C:13:01' error will automatically disappear. At this point, quickly
format the memory stick using the camera's format feature.NOTE: Al;ways use the camera's built in function to format your memory card.Do not use the computer to format the memory card.
If you still face any problems then you will have to get it repaired.
whenever i change to "set up" and go to "cf card tool", "access" would...
(More)
WHENEVER I CHANGE TO "SET UP" AND GO TO "CF CARD TOOL", "ACCESS" WOULD ALWAYS POPS-UP ON THE SCREEN AND THE RED LIGHT WOULD TURN ON FOR ABOUT 10-30 SECONDS EVERYTIME I WOULD SCROLL DOWN TO "CREATE REC FOLDER". THIS WOULD OCCUR 2 OR 3 TIMES EVERYTIME I TRIED TO TOGGLE THE SWITCH TO ACCESS ANOTHER FOLDER. IT'S TRULY FRUSTRATING!!
What are the best settings for nightclub action photos without getting so much noise? With 400 or...
(More)
What are the best settings for nightclub action photos without getting so much noise? With 400 or 800 ISO the noise is really bad but it wasn't like that before I reset it. How can I fix this?
flash does not go when I click any picture. Rather some err message is blinked on the display. But...
(More)
flash does not go when I click any picture. Rather some err message is blinked on the display. But the picture can still taken without flash