Need code for one for all remote for another tv sanyo. remote i use is urc 4330 bo3 can u help me for the 4 digit i need to use remote

0154

Is your remote the URC-4330? The listed remote uses 4-digit codes.

If the TV doesn't have additional features (VCR, DVD etc.), try the codes: 0054, 1254, 0030, 0179, 0187, 0096, 0020, 0186, 0386, 0024 . There is also a manual code search option (and a way to look up the code). For the URC-4330, press TV, then press and hold Set until the LED blinks twice. Release Set and press 9 9 1. After the LED blinks twice again, point the remote at the TV (with it on) and slowly press Power and TV in alternation. When the TV turns off, that is the first possible code. Press and hold Set until the LED blinks twice to save. Check if the remote controls additional functions for the TV. If it doesn't, repeat the code search.

Recalling the current code is similar to searching. Press 9 9 0 after entering the set mode. Press 1 (to get the first digit of the code) and wait 3 seconds, count the LED blinks (no blinks = 0). Repeat with 2, 3, and 4 to get the entire code.

You can find the manual and codes here: http://www.oneforall.com/support/manual . Use the drop down menus to select Universal Remote and the URC-4330 (or other remote if you provided the wrong model but it is an One for All remote).

Please note that the codes in the remote are limited to those devices released at least 6 months before the remote was programmed.

I hope this helps.

Cindy Wells

Hi,
Code for your sanyo tv is 0154
Thank You

Sanyo TV codes... 154, 159, 146

Hi,

You can download the complete user manual for the remote with the programming codes from:

http://www.rockabilly.net/files/manuals/URC-4330.pdf

Hope this solves your problem. Thanks for using FixYa.

i need the code for a samsung tv

Daewoo TV codes for a URC-4330 are:
0451, 1661, 0092, 0672, 0623

If these don't work for your model, you'll need to run through the auto code search function.

1. On the remote control, press TV once.
2. Press and hold SET until the LED
blinks twice, then release SET.
3. Enter 9 - 9 - 1.The LED will
blink twice.
4. Aim the remote control at the the
TV and slowly alternate between
pressing POWER and TV. Stop when
the TV turns off.
5. To lock in the code, press and hold
SET until the LED blinks twice, then
release SET.

Sanyo Codes Are 0154,0159,0146
Hope This Helps

Goto the link below. Select the model number of your One for All then select TV then select Sanyo then click on Submit. That will give you your codes.


http://www.ofausa.com/en/advanced_search.php

http://www.rockabilly.net/files/manuals/URC-4330.pdf