Question about Microsoft Windows Server Standard 2003 for PC

2 Answers

Windows 2003 server not booting ,due to ntoskml.exe file missing

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 729 Answers

I think it is your antivirus that has Quarantine that file because it has chance. You can read about the file here :
http://www.liutilities.com/products/wintaskspro/processlibrary/ntoskrnl/

http://freeforum.avg.com/read.php?8,53101,53101#msg-53101

http://answers.yahoo.com/question/index?qid=20090412003115AAjU7ZG

http://www.eggheadcafe.com/software/aspnet/29143123/ntoskmlexe-problem.aspx


And this is how you can reinstall the file :

http://forums.pcpitstop.com/lofiversion/index.php/t93938.html

Other possibilities :

http://www.tech-archive.net/Archive/Windows/microsoft.public.windows.server.general/2006-11/msg01024.html


You can also try to run chkdsk with your install cd, that maybe resolve the problem of a corrupt ntoskml.exe. I mean you just place the installation cd in the cd/dvd rom and reboot (choose to boot from the cd/dvd rom in settings/ boot priority) and choose r for repair, and then type chkdsk and enter. After you just try again to boot.

Hope that solve your problem.

Otherwise you have to boot to windows with a boot cd and then see your firewall settings or your Quarantine files in your antivirus

Have a nice day :O)

Please rate my answer

Posted on Sep 11, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 153 Answers

Hi

this happens if the boot.ini file gets corrupted, i would suggest u to boot the Computer wid ur sever CD and select repair option.

  1. Reboot the computer, as the computer is starting you should see a message to press any key to boot from the CD. When you see this message press anykey.
  2. In the Microsoft Windows setup menu press the R key to enter the recovery console.
  3. Select the operating system you wish to fix, and then enter the administrator password.
  4. Type expand d:\i386\ntoskrnl.ex_ c:\windows\system32
  5. You will then be prompted if you wish to overwrite the file type Y and press enter to overwrite the file.
  6. Type exit to reboot the computer.
Note : d: is ur cd drive

Hope it helps u

Good Day

Posted on Sep 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

\windows\system32\winload.exe missing or corrupt 0xc000000f


":\windows\system32\winload.exe " Status: 0xc000000f This error message states a missing or corrupt Winload.exe file, due to which the booting process of the system halts and the data stored in the hard drive becomes inaccessible. Cause: Following are the causes for the corruption in Winload.exe: Software or hardware issues. Corrupt Boot Configuration Data (BCD). Incompatible partition. Resolution: To resolve the above issue, consider the measures below: To fix the corrupted Winload.exe file, use the Windows Recovery Environment. To do so, use the Startup Repair option in the System Recovery Options dialogue box and choose the operating system to repair. Using the Windows Recovery Environment will restore the system to a particular point, which will get the system to an appropriate working state. In most cases, the above measures will help you to resolve the issues related to Winload.exe. But, if the problem persists, then you will need re-install Windows. But, a clean re-install of the Windows operating system deletes all the data stored. In these situations, to recover your data completely, it isrecommended to use a high quality Windows Data Recovery Software. The Windows Data Recovery application incorporate advanced scanning algorithms to ensure quick and comprehensive recovery of your data. Stellar Phoenix Windows Data Recovery v4.1 is the most appropriate utility that recovers your lost, deleted or inaccessible data accurately. The Windows Data Recoveryapplication offers highly intuitive graphical user interface, that makes it easy to use and understand without any prior technical understanding. This recovery tool is fully competent to recover data from FAT16, FAT32, VFAT, NTFS and NTFS5 file system based disks. The read-only software is compatible with Windows 7 RCI, Vista, XP, 2003 and 2000.

Jan 16, 2013 | Acer Aspire 5610-4648 Notebook

1 Answer

Hi ,I have HP Pav DV6 with windows 7.But I want to install windows server 2003 & its not allowing me.I want to make it dual boot,Plzz help.I need to do it urgently...


Hi,
Please understand that Windows 7 uses different startup files and procedures so it is expected that the original Windows Windows 7 system cannot be booted if you install a new dual boot Windows Server 2003 system. If you would like to install Windows Server 2003 on another partition, please do that first. After that, Windows Server 2003 will boot but WIndows 7 not. However, we can try the following method to make Windows Vista work again: Insert the Windows 7 disk into DVD-ROM. Click Start, click Accessories, right-click the command-prompt shortcut, and then click Run as Administrator. Type the following command at a command prompt and press Enter: Drive:\boot\Bootsect.exe /NT60 All In this command, Drive is the drive where the Windows 7 installation media is located. Note The boot folder for this step is on the DVD drive. 4. type the following commands at a command prompt and press Enter. Note In the commands below, Drive is the drive where Windows 7 is installed. Drive:\Windows\system32\Bcdedit /create {ntldr} /d "Windows Server 2003" Drive:\Windows\system32\Bcdedit /set {ntldr} device partition=x: (Note: x: is the drive letter for the active partition. For example, if 2003 is installed on C drive, device partition=c: ) Drive:\Windows\system32\Bcdedit /set {ntldr} path \ntldr Drive:\Windows\system32\Bcdedit /displayorder {ntldr} /addlast
5. Restart the computer.

Jun 08, 2011 | Computers & Internet

1 Answer

Windows could not start because the following file is missing or corrupt ntoskrnl.exe Operating System is Microsoft Server 2003 R3


ntoskrnl.exe is a main file that is part of windows. if you have the windows server 2003 R2 cd you can boot up with that and there will be an option to "repair" once you get so far. I would try this first as it is your best bet and can replace missing files.

Nov 23, 2010 | Dell PowerEdge 1800 Server

2 Answers

My server can't boot


Hi ,
You have not mentioned which Operating System . If its for 2003 follow the steps.
To install the Recovery Console as a startup option:
  1. While Windows is running, insert the Windows Server 2003 CD in the computer's CD or DVD drive.
  2. Click Start, and then click Run.
  3. In the Open box, type the following line, where drive is the drive letter of the computer's CD drive or DVD drive that contains the Windows Server 2003 CD, and then click OK: drive:\i386\winnt32.exe /cmdcons

    To install Recovery console as a startup option for Windows Server 2003 x64 edition, type the following line: drive:\amd64\winnt32.exe /cmdcons
  4. Click Yes when the message appears, to install the Recovery Console.
  5. When you receive the message that states that the Recovery Console is successfully installed, click OK.
  6. To use the Recovery Console, restart the computer, and then use the ARROW keys to select Microsoft Windows Recovery Console in the Please select the operating system to start list.
uparrow.gifBack to the top How to Remove the Recovery Console loadTOCNode(2, 'summary'); As a precaution, do not remove the Recovery Console. However, if you want to remove the Recovery Console, you must do so manually.

To remove the Recovery Console, follow these steps:
  1. Restart the computer.
  2. Click Start, and then click My Computer.
  3. Turn on the Show hidden files and folders option (if it is not already turned on). To do so, follow these steps:
    1. On the Tools menu, click Folder Options.
    2. Click the View tab.
    3. Click Show hidden files and folders, click to clear the Hide protected operating system files (Recommended) check box (if it is selected), and then click OK.
  4. Double-click the drive letter that represents the hard disk on which you installed the Recovery Console.
  5. Delete the Cmdcons folder from the root folder, and then delete the Cmldr file. To do so, follow these steps:
    1. Right-click Cmdcons, and then click Delete. Follow the instructions that appear on the screen, and then click Yes to confirm the deletion.
    2. Right-click Cmldr, and then click Delete. Follow the instructions that appear on the screen, and then click Yes to confirm the deletion.
  6. Remove the Recovery Console entry from the Boot.ini file. To do so, follow these steps.

    WARNING: Incorrectly modifying the Boot.ini file may prevent your computer from restarting. Make sure that you delete only the entry for the Recovery Console.
    1. At the root folder, right-click the Boot.ini file, and then click Properties. Click to clear the Read-only check box, and then click OK.
    2. Open the Boot.ini file in Notepad.
    3. Locate the Recovery Console entry, and then delete it. The Recovery Console entry looks similar to the following line: C:\cmdcons\bootsect.dat="Microsoft Windows Recovery Console" /cmdcons
    4. On the File menu, click Save, and then click Exit to quit Notepad.
  7. Change the attribute for the Boot.ini file back to Read-only. To do so, right-click Boot.ini, and then click Properties. Click to select the Read-only check box, and then click OK.

Oct 12, 2009 | Acer Altos G710 Server

1 Answer

Ntsokrnl.exe is curropted reinstall the file


1. boot with xp or win2003 cd and choose "R" repair in the begining.
choose win installation and write administrator password.
run checkdisk. write "chkdsk /R". enter

2. write "fixmbr c:" enter
and "fixboot c:" enter
restart.

3. if 1 & 2 doesent work boot again in repair mode and try this
write expand d:\i386\ntoskrnl.ex_ c:\windows\system32 overwrite the file.
exit and reboot.

Jul 17, 2008 | Microsoft Windows Server Standard 2003 for...

3 Answers

Abnormal Shutdown of windows 2003 standard


y cuse its sharing isssas to 1st off way to maby boots 2 max os on hard drive unless u want to fail soon do all your updates

Jan 25, 2008 | Microsoft Windows Server Standard 2003 for...

4 Answers

BOOTMGR is missing


i have a problem when my external drive is in the usb and i start my laptop it says bootmgr is missing how can i sort this problem as i have to take it out of the usb plug to get my laptop working the i plug the external drive back in and it works,

Dec 17, 2007 | Computers & Internet

Not finding what you are looking for?
Microsoft Windows Server Standard 2003 for PC Logo

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2775 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...