Question about HP Designjet Z6100 InkJet Printer

1 Answer

After pushing Power button the printer turns off within few seconds. During that period the display shows nothing, just lights up, the power light is flashing. I've tried several times to start, but same results. Please advise. Bilegt

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 96 Answers

Remove the rear cover that conceals your main pca. turn on your printer and check the cpu fan. if the fan is not rotating up to speed, this can cause your problem. you can purchase a similar fan at microcenter or you can search online for one. shouldn't cost you more than $10.00. you can purchase it direct from HP the part number is (if they haven't changed the number) Q1271-60160

Posted on Sep 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a separate fax line for my Canon MX310. It goes into fax mode but noting happens. I also cannot receive faxes.


The only reason to call the phone company is if you're not getting a dial tone on that line. Otherwise, have you shut down the printer and tried to reset it to factory defaults. To do that, follow the instructions below:
  • 1 Switch the Canon MX310 off using the "Power" button, then push the "Stop/Reset" button on the control panel. Hold the button down for about five seconds.
  • 2 Push the "Power" button while holding "Stop/Reset." Hold down both buttons for five seconds.
  • 3 Release "Stop/Reset" while holding down the "Power" button.
  • 4 Push "Stop/Reset" twice while continuing to hold the "Power" button. Release the "Power" button. The power light will turn green.
  • 5 Once the light is steady green, push "Stop/Reset." Wait about three seconds and push it again. Wait three more seconds and push it one final time, for a total of three times. The power light will turn orange.
  • 6 Push the "Power" button, then lift the MX310 cover open.
  • 7 Remove both ink cartridges and wait 10 seconds. Replace the cartridges and close the MX310 cover. Wait 30 seconds.
  • 8 Push the "Power" button. Wait a few seconds to allow the printer to fully power down, then switch the Canon MX310 back on using the "Power" button.
  • Good Luck Mark

Feb 20, 2015 | Canon PIXMA MX310 All-In-One Printer

1 Answer

Printer does not print


Instructions
    • 1 Switch the Canon MX310 off using the "Power" button, then push the "Stop/Reset" button on the control panel. Hold the button down for about five seconds.
    • 2 Push the "Power" button while holding "Stop/Reset." Hold down both buttons for five seconds.
    • 3 Release "Stop/Reset" while holding down the "Power" button.
    • 4 Push "Stop/Reset" twice while continuing to hold the "Power" button. Release the "Power" button. The power light will turn green.
    • 5 Once the light is steady green, push "Stop/Reset." Wait about three seconds and push it again. Wait three more seconds and push it one final time, for a total of three times. The power light will turn orange.
    • 6 Push the "Power" button, then lift the MX310 cover open.
    • 7 Remove both ink cartridges and wait 10 seconds. Replace the cartridges and close the MX310 cover. Wait 30 seconds.
    • 8 Push the "Power" button. Wait a few seconds to allow the printer to fully power down, then switch the Canon MX310 back on using the "Power" button.

Jul 23, 2014 | Canon PIXMA MX310 All-In-One Printer

1 Answer

HP 1315 printer won't turn on


I have an HP printer too, but it's HP 2050. When i plug it in it usually makes a noise and then the power button blinks. To turn it on requires me to hold the power button down for a few seconds until the power button light stays on. If you haven't tried yet, try pushing down and hold and see if it turns on. Hope this helps :)

Apr 20, 2014 | HP Photosmart 8450 InkJet Printer

1 Answer

Show error


E indicates an Error condition.

1.Without turning off the product, disconnect the USB cable from the rear of the product.

NOTE:The USB cable connects to the port on the rear of the product. The port is labeled with the USB icon ( ). If your printer has a network or wireless connection, ignore this step.

Figure 1: Example USB connection (your product might not look exactly the same as this example)


2.Remove the cartridges from the product.

3.Wait until a message to insert the cartridges displays. If you do not see a message within a few minutes, skip to the next step.

NOTE:If your printer does not have a display, wait until the cartridge lights blink. If the cartridge lights do not blink within a few minutes, skip to the next step.

4.Disconnect the power cord from the back of the product.

5.Wait 60 seconds.

6.Reconnect the power cord. If the product does not automatically turn on, press the Power button ( ).

7.Reinsert the cartridges, and then close any open doors on the product.

8.If you receive a prompt to print a calibration page, do so.

9.If you disconnected the USB cable, reconnect it to the rear of the product.

10. Try printing again.


1.Without turning off the product, disconnect the USB cable from the rear of the product.

NOTE:The USB cable connects to the port on the rear of the product. The port is labeled with the USB icon ( ). If your printer has a network or wireless connection, ignore this step.

Figure 1: Example USB connection (your product might not look exactly the same as this example)


2.Remove the cartridges from the product.

3.Wait until a message to insert the cartridges displays. If you do not see a message within a few minutes, skip to the next step.

NOTE:If your printer does not have a display, wait until the cartridge lights blink. If the cartridge lights do not blink within a few minutes, skip to the next step.

4.Disconnect the power cord from the back of the product.

5.Wait 60 seconds.

6.Reconnect the power cord. If the product does not automatically turn on, press the Power button ( ).

7.Reinsert the cartridges, and then close any open doors on the product.

8.If you receive a prompt to print a calibration page, do so.

9.If you disconnected the USB cable, reconnect it to the rear of the product.

10. Try printing again.



If that doesn't work you can log on to HP.com/Support and Drivers.
Find your device and search the error codes listed.
You can also download a real good Utility, HP Print and Scan Doctor.

Apr 27, 2012 | HP DeskJet F380 All-In-One Printer

3 Answers

How to set led watch


What make and model of watch is this?

Sep 08, 2011 | Watches

1 Answer

When I try to send a fax I get a redo message and no pages are sent...i have sent many faxes to this number....a message appeared after one page was scanned that said to prress clear and srop...i could not...


Please reset the Printer by following these steps:

Switch the Canon MX310 off using the "Power" button, then push the "Stop/Reset" button on the control panel. Hold the button down for about five seconds.

Push the "Power" button while holding "Stop/Reset." Hold down both buttons for five seconds.

Release "Stop/Reset" while holding down the "Power" button.

Push "Stop/Reset" twice while continuing to hold the "Power" button. Release the "Power" button. The power light will turn green.

Once the light is steady green, push "Stop/Reset." Wait about three seconds and push it again. Wait three more seconds and push it one final time, for a total of three times. The power light will turn orange.

Push the "Power" button, then lift the MX310 cover open.

Remove both ink cartridges and wait 10 seconds. Replace the cartridges and close the MX310 cover. Wait 30 seconds.

Push the "Power" button. Wait a few seconds to allow the printer to fully power down, then switch the Canon MX310 back on using the "Power" button.

Feb 27, 2011 | Canon MX310 Office All-In-One Printer

1 Answer

Starting up


1. Plug the printer directly to the wall outlet.
note : do not use any power surge. just plug the unit directly to the wall outlet
2. Reset the printer by unplugging the power cord at the back of the printer while its still on. Plug the power cord after 30 seconds

Aug 08, 2008 | HP Photosmart C4180 All-In-One InkJet...

1 Answer

Power Problem


power down only apply if you power down button put the hold 5 second printer automatic power down after that u unhold

Feb 26, 2008 | HP PSC 1610 All-In-One InkJet Printer

Not finding what you are looking for?
HP Designjet Z6100 InkJet Printer Logo

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...