Question about GE WBSR3140DW Top Load Washer

1 Answer

GE Washer Model WJRR4170E4WW squeaks while agitating

Hello,

The washer makes a loud squeaking sound when it is operated on the “Cottons” side of the wash select dial. The sound gradually becomes less loud but it is still present as the machine runs through its cycles. The squeaking happens at each time that the machine must agitate (washing or rinsing) but it does not squeak when the motor is spinning and expelling water from the clothes (unless at this point the squeak is so high-pitched I can’t hear it). There is no squeaking sound when the machine is set on the “Easy Care” side of the dial. I am sure one side (Cottons) agitates more vigorously than the other side hence the presence or absence of the noise. The washer runs fine in all other respects (spins so the clothes are almost dry for the dryer, drains well, leveled correctly, fills properly) but I am sure the squeaking sound is wearing the machine faster than it should. I appreciate any assistance or suggestions.

Regards, Rick

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 121 Answers

There are four suspension rods that the tub hangs on. When the washer is agitating the tub will rock back and forth and the rods will move back and froth as well. To fix this noise, lift up in each rod and put some lubricant in the cup that the rods fit into at the top of the washer.

Note that it is best if you use a lithium-based lubricant rather than silicone based lubricant.

For more on do-it-yourself appliance repair help visit http://www.appliance-repair-it.com/index.html

Posted on Sep 17, 2009

Testimonial: "shawnryan111, thank you for a great suggestion. That did the trick and the machine runs much more quietly. Thank you for the assistance. Regards, Les"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hoover 2300L 6.okg boss. Squeaking when agitating back& forth, not when spinning. Is this a bearing problem? & is it replacable. If so, from where in south australia? Or wherever.?




Washing machines don't usually run silently, but in most cases, a squeaking noise that occurs while the washer is agitating the clothing is not normal and signifies a problem. If the noise only happens when the washing is agitating, the problem is likely connected to the motor or your water pressure. Depending on the specific cause, you may feel comfortable fixing it yourself. Otherwise, call a professional.

Other People Are Reading


The Agitator
  • Agitators are located in the center of the drum, or basket, of top-load washing machines. Front loading washing machines do not use agitators -- instead, gravity moves the clothes from the top of the drum to the bottom. Agitators usually consist of a tall cone fitted with arms at the base. The purpose of the agitator is to rotate the clothes and soapy water around the tub to clean the clothes. The agitator itself is not usually the cause of the squeaking noise. It is powered by the drive mechanism, which consists of a motor, clutch and gears.
Motor Problems
  • A repetitive squeaking noise during the agitation cycle may signify a problem with the motor. Specifically, the belt on the motor may be wearing out. Some motors use rubber couplers, which also wear out easily. The belt is necessary for the agitator to turn, but over time, it wears thin, just like the belts in your car's motor. An easy way to test for this problem -- if you're handy -- is to take the belt off the motor and then run it. If the squeaking noise stops, the problem is indeed your belt. Of course, this means your agitator won't move. Replacing the belt should fix the problem.
Water Pressure Issues
  • The tub, or drum, fills with water right before the agitator turns on, and water continues to circulate throughout the washing process. As the tub fills and water circulates, you may hear a squeaking or squealing noise if you have high water pressure. This sound is caused by the force of the water moving through the pipes. To adjust this, turn the knobs on the hot and cold valves on the pipes that go into your washing machine.
Considerations
  • New washing machines may squeak at first as the parts "warm up," according to the GE Appliances website. The noise should disappear after five complete washing cycles have run on the machine. Unbalanced loads, overly heavy loads and loose items in the drum may also cause noise when the agitator comes on, but these things usually do not produce a squeaking sound.


Read more :http://www.ehow.com/info_12131280_washer-squeaks-agitating.html My Washer Squeaks When Agitating eHow

Jun 14, 2015 | Hoover Washing Machines

1 Answer

When my washer was on the spin cycle it was making a very loud high squeaking/buzzing noise, could this be the belt and how do i fix the problem? Thanks Crystil


The belt would probably squeak in the agitate direction also. I suspect a tub or clutch bearing is going out. If you find signs under the washer that it's been leaking, the tub bearing needs to be changed. It's a major disassembly job. The clutch bearing may be easier.

Jul 04, 2011 | Maytag Legacy Series Top Load Washer

1 Answer

MAV-3 top load washer makes loud squeaky noise during the wash cycle.


Is it a constant squeak or does it go squeak-squeak - squeak as it agitates? It is a squeak that is intermittant then usually your brake is losing its hold. You will need a technician to do this job. It requires special tools that they should have. I repeat a technician should do this job. You can seriously hurt yourself attempting this repair. Also see if the inner tup is turning as it agitates, if it is then it i definately the brake. But one more time do not try this repair it is a dangerous repair that should be left to technicians. There is a spring that is under heavy compression that requires a tool to release it.

Dec 28, 2010 | Maytag MAV6200 Top Load Washer

1 Answer

The tub has a metallic squeak as it goes through the intial agitation. It is Loud and only when tub shifts to the left side


It could be the bungy straps are stretched or the support rods are allowing the tub to touch the floor and the motor pulley is making that miserable noise. How about a manual? I have seveal versions HERE

Feb 21, 2010 | GE WBSR3140DW Top Load Washer

1 Answer

WASHER MAKES SQUEAKS AND SOUNDS REAL LOUD DURING


it could be a split pipe but its far more likley to be the drum bearings on the way out thats why its so loud and thats also were the water is coming from as well
not a cheep repain to get done,,,
sorry for the bad news

Oct 25, 2009 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

Washer squeaks really loud while agitating. Drains great 6yr old


Could indeed be the belt or at worst it could be thr main bearing getting dry and gradually seizing up. Hope it,s the belt!!

May 20, 2009 | Washing Machines

1 Answer

Squeaks really loud while agitating. Drains great, and works well other wise. Could the belt be going bad?


Could either be the drivebelt slipping or, if an older machine could be the main bearing getting dry.

May 20, 2009 | Washing Machines

1 Answer

Maytag legacy series washer top load-squeaky during wash and rinse


very possible if squeaks in agitation top springs that hold tub needs greased under spring & plastic shield under spring. had same problem on big front loaders whirlpool

Aug 31, 2008 | Maytag MAH2400A Front Load Washer

3 Answers

Squeaking Top Load GE Washer


I bought a new GE Washer GTWN5050MWS yesterday. From the first load it squeaked each time the tub moved back and forth (no agitator in the infusion type) It is a quick squeak and kind of resembles a cat getting it's tail under a moving rocking chair. I checked the entire owners manual and it describes several noises and not one of them describes what my new washer is doing. It does not make this sound except for when it is in the wash cycle. Spinning is quiet, and during the agitation of the rinse cycle it is a much more subdued squeak. But during the wash cycle it is not acceptable.

I called GE this morning and they told me it was normal operation for all infuser types of their washer to make this noise. Tomorrow I will be taking it back for a full refund.

We purchased this machine because our 2-year old front loading GE washer broke down (discharge pump I think) and to get it fixed usually takes a couple of weeks. We thought it might be better to have a 2nd washing machine instead of paying the laundry mat. It took a month to get the last one declared unfixable in 2008. Maybe I was wrong. But this is very bad luck to have a brand new washing machine squeak so loud out of the box.

Mar 15, 2008 | GE Profile WPRE6100G Top Load Washer

Not finding what you are looking for?
GE WBSR3140DW Top Load Washer Logo

2,984 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...