Question about Intel (RK80532PG0881M) Pentium 4, 3 GHz Processor

1 Answer

Processor my processor pin has broked....what do i do

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers
Re: Processor

Dont worry....most chances are that it would work even if you place it in your mother board...

for more optimum results place the broken pin into the empty slot by counting where the pin will be placed

it would work for sure

Posted on Dec 10, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Dark spot on pinless processor

the computer tends to shut down when the procssor ovrheats and if u removed the processor or the heatsync for that matter you have to remove old termo pate and replace it with new termo paste otherwise your brossesor will burn out

May 08, 2013 | Intel Computer Processors

3 Answers

What is the difference between a pin less and pin processor?

A pin processor have the pins at its bottom which merges in to the motherboard!
A pinless processor has no pins.pinless processor has a flat bottom with around an extra 297 connections to the motherboard. You cant fit one to a pinned socket. vote me if it is helpful

Sep 20, 2011 | Intel Core Duo T2600, 2.16 GHz Core Duo...

1 Answer

Hp pavilion when i start the pc monitor still always black, no acustic sound and no spie leds on. is a processor problem or motherboard problem? when i turn on the pc, on keyboard three led get...

That sounds like a Mother board problem.
Try this, when you turned the computer on, press F8 don't let until the bios shows.
If the bios did not shows up, problem would be........
  • Check the processor, replace w/ similar one.
  • Check the power supply unit, if you have a spare one, use it just to check the system.
  • Check the processor seat pins( where the processor sits ) pins might have burned.

Hope that helps you out!

Sep 13, 2011 | Computer Processors

1 Answer

How to recognise a pin and pi nnless processor

A pin Processor has metal pins on the bottom of it.

For an example let's use an Intel Pentium 4 processor, that fit in a Socket 478 processor socket.

Viewing the link above, observe the green square under the grayish metallic looking square.
The green square is a circuit board.
(Width and length, about the length of your first digit on your thumb)

The grayish metallic square, is a metal shell cover over a Chipset.
Chip and Chipset are slang terms for I.C.
Integrated Circuit,

The Integrated Circuit here is the Processor.
The Processor is connected to the green circuit board. (PCB. Printed Circuit Board)

On the bottom of the green circuit board are contact pins. In this case 478 of them. (478 pins)

The tiny metal contact pins fit down into matching socket holes, in the processor socket.

A Socket 478 processor socket,

(You can click on the photo to the upper right to enlarge it.

The next design to come out, has the Processor with contact pads, (Pinless), and the processor socket has the contact pins.
An LGA 775 processor socket,

Example of a Pentium Dual Core's bottom side. (LGA 775 processor socket is used),

There you have it.

A 'Pin' processor has metal contact pins on the bottom.

A 'Pinless' processor has metal contact pads.

For additional questions please post in a Comment.


Sep 03, 2011 | Intel Computer Processors

1 Answer

How to scoket in pentium d procceser

if you look more closely on the processor at the face where pin terminals are, on the 2 corner there is slot where no terminals (a triangle figure)
Its the same figure you will see on the socket of the motherboard where processor is attached.
use this corner orientation to place properly the processor on the motherboard.


Feb 08, 2011 | Intel Pentium D 915, 2.8 GHz (BX80553915)...

1 Answer

I installed a new cpu and now computer will not boot. I thought the processor might be bad so I returned and got a new one. This was not the problem since the new one does nto work and original processor...

Are you sure the main board is capable of taking the new processor speed. There might be a jumper on the board to switch processor speed or could be a Bios setting. What exactly happens with the new processor installed do you get any post beeps at all if so how many. Double check to make sure there are not bent pins on the processor if it has any pins. What kind of Pc is it you can usually go to the manufacture web site to the drivers section and see if there are any Bios updates if there are you can save the bios to some type of disk then boot from the disk and the Bios flash is automated and run by itself.

Hope this helps some

Jan 06, 2011 | Intel Core 2 Duo E6700, 2.66 GHz E6700...

1 Answer

I use pentium d 3.00 GHz processor ....i open it from its cpu case and clean it ....but when i restore it i dont work....i mean monitor is blank.......but ram is ok ...i checked it

If the monitor is blank it means that you may not of reseated the processor properly. Also, some socket boards have the pins for the processor on the board as oppose to it being on the processor. Therefore, it's possible if not careful enough you could easily bend the pins on the motherboad. Check to make sure not of the pns are bent. However you look at it, it is definitely a processor issue and nothing else.

Nov 20, 2010 | Intel Pentium D 945 3.4GHz / 4MB Cache /...

1 Answer

How to recognizea pinless or pinned processor

A pinless (Pentium 4) processor has no pins.
Just a flat bottom with around an extra 297 connections to the motherboard.
You cannot fit one to a pinned socket.
Hope this helps

Jan 25, 2009 | Intel Core Duo T2600, 2.16 GHz Core Duo...

1 Answer

What processor?

Not all processors fit laptops. You shouldn't get a higher powered processor as you would then need to change the power supply as laptops are set to suit themselves.

Getting an intel may stop problems accoring.

Jan 14, 2009 | Intel (RK80532PG0881M) Pentium 4, 3 GHz...

3 Answers

Uppgrade of a processor

The processor upgrade defends on your motherboard if it supports a processor like Core2Duo, because it all depedns on the motherboard if you can upgrade processor and RAM ,if you buy a new processor and its not supported by your motherboard it will be a wast, but if your computer manufacturer told you that your motherboard can supports a processor like Core2Duo go ahead upgrade to it , that will definitely make teh computer faster and better sicne Core2Duo is a high end processor right now..

Hope that helps...........

Sep 18, 2008 | Computer Processors

Not finding what you are looking for?
Intel (RK80532PG0881M) Pentium 4, 3 GHz Processor Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computer Processors Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Shafky Khan

Level 2 Expert

85 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Are you an Intel Computer Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides