Question about Toastmaster 1183N Bread Maker

1 Answer

The kneading paddle won't turn and something internally seems to

The paddle in the bucket freezes up, soon after it starts. Now I heard a loud screeching and it was completely frozed or wouldn't turn and the bottom gear was spinning like in a fast free spin. Something inside has broken. There was bits of black rubber that had been 'chewed' loose from the bucket gear on the ourtside center shaft. Is this repairable? I love the bread baker and have not had problems until it started stalling
Dorothy Hoffman 2411 Virginia DrHays, KS 67601

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 83 Answers


Posted on Sep 11, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Is there a spring that fits on the shaft/kneading blade?

I doubt if there was a spring on the kneading blade. It does sit a little bit loosely, this is normal

Jun 01, 2015 | Kitchen Appliances - Others

1 Answer

Won't knead dough

Chances are that your drive belt is broken. With the pan and paddle removed from the oven and your machine unplugged turn it on its side so the bottom is facing you. Hopefully it has one of the removable metal panels on the bottom. If it does, remove that panel using a screwdriver. When the panel is off see if the drive belt that runs between the 2 pulley wheels is broken. If it is broken remove the old belt and look for a number on the side of the belt that looks something like this STS 60 S3M471 I sell replacement belts for bread machines. Contact me through my website if you are interested in replacing your drive belt. Thanks, Daryl

Again the website is or just email me at

Mar 05, 2013 | Kitchen Appliances - Others

1 Answer

Paddle won't turn properly while kneeding

does the pan turn at all while kneading? Does in knead at all?

Feb 03, 2013 | Oster Model 5812 Bread Machine Loaf Pan...

2 Answers

Where can I buy a kneading blade for a Toastmaster bread machine, Model 1185?

The Breadman Model TR888 uses the very same kning blade paddle as your Toastmaster Model 1185.

Click here:

Hope this helps!

Jun 11, 2011 | Toastmaster Kitchen Appliances - Others

2 Answers

I have an old toastmaster bread machine model 1154, and I realized that the kneading blade does not rotate when the ingredients are in the bread pan. Either the kneading blade mounting shaft and the...

If the spindle is turning and the paddle is not then your paddle is worn out and probable slipping on the spindle. If the spindle isn't turning then your problem is underneath the pan or inside the drive and your paddle may be fine.

Dec 01, 2010 | Toastmaster Kitchen Appliances - Others

2 Answers


If your outer bucket is leaking down the liquid brine solution it won't freeze properly. The rival buckets are bad about leaking. You might try pre-conditioning the outer bucket before making your attempt at freezing. Just fill the bucket to the weep hole with water and let it sit for about half an hour, then pour out all but about 4 inches of it and start adding ice and salt.

Jul 04, 2010 | Rival 8550-X 5 Quart Ice Cream Maker

1 Answer

My machine will not knead. It does the clicking like normal but the paddle is not moving. It goes through the whole cycle without any movement.

There are three possible reasons why this is happening. 1) Make sure the pan is properly seated in the machine. 2) The paddle will not rotate because it is stuck. 3) The belt is broken or is loose. Make sure the pan is seated correctly will solve problem one. Take the pan and paddle out of the machine and see if turns freely by hand. If no, then the sealed bearing is broken or something is causing the paddle to stick (put water in pan and soak it for awhile). If everything is ok keep the pan out of the machine and start a kneading cycle. Look through the lid to see if the motor shaft is turning. If no then the belt fell off or is loose. Hank

Jun 13, 2010 | Breadman TR2500BC Bread Maker

1 Answer

My chefmate breadmaker - The liquid and flour don't get mixed..

Even though you hear the paddle moving, the belt may be slipping so the paddle does not rotate at full force. Please check the tension of the belt. You can access the motor, belt, pulley assembly inside the base of the machine. Also, please check to make sure the kneading cycle is run fully. Check the manual to see length of cycle. Good Luck...Hank

Jan 22, 2010 | Chefmate TR 7000 Bread Maker

1 Answer

The kneading paddle won;

I have found it necessary to periodically remove the shaft from the pans of breadmakers and clean off the carbon that is "coked" grease. I polish the shaft with crocus cloth and clean out the bearing. Often one has to remove a "C" clip to dis-assemble the shaft from the pan.

After cleaning I relube it with FOODSAFE grease before re-assembly.

Sep 11, 2009 | Toastmaster 1183N Bread Maker

1 Answer

Welbilt bread maker loud buzz

Probably not. You could always take it apart and look at the printed board to see if there is anything that looks like a short circuit on it, like a black smudge from an arc. Somebody handy with a solder gun might be able to fix that (that happened to my Maytag washer when there was a thunderstorm). If not that maybe the software would reset itself after you put it back together -- stranger things have happened. If nothing works, reviews for the Sunbeam 5891 1-2 lb loaf machine are very high, and it only costs around $60 (I'm probably going to buy that one next). If you dispose of your old machine, post the loaf pan, paddle and manual on ebay. People seem to lose the paddles all the time. Good luck.

Mar 31, 2009 | Welbilt ABM3500 Bread Maker

Not finding what you are looking for?
Toastmaster 1183N Bread Maker Logo

Related Topics:

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toastmaster Kitchen Appliances - Others Experts

Angel Joseph Jr.
Angel Joseph Jr.

Level 2 Expert

683 Answers


Level 3 Expert

102366 Answers


Level 1 Expert

6 Answers

Are you a Toastmaster Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides