Question about Nitro BMW-484 Car Amp

2 Answers

I have a nitro 1200 watt amp earlier today it was workin with no problems we parked then came back in the car 3 hours later and it wasnt workin wont come on or anything just red light which is protecting its suppose to be green which means power, its been hooked up since january never gave problems till now

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 60 Answers

Check your speaker wires, make sure everythings connected right with no short circuits, and check all of the fuses in the amp, and make sure none of them are blown. If all this checks out just check the battery wire, grnd, and remote wires. It has to be a wiring issue unless you busted your amp, but if was working when you tuned it off it should be alright... hop this helps...

Posted on Sep 11, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nitro Master
  • 637 Answers

Disconnect all speaker connections and rca cables. Leave power, ground and remote wires intact. Try turning on again. If you still have a protection light your amp is faulty. Hopefully you have warranty D .A thumbs up would be greatly appreciated if this answer is helpful to you. i have a nitro 1200 watt amp earlier today it was - nitro-1200-watt-amp-earlier-today-lv2kkrmxrai4iihdvw4m3np2-2-0.jpg http://www.nitrobmw.com/

Posted on Dec 18, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is two comp 12's with a 1200 watts nitro amp a


The 1200w rated for the amp is usually an absolute maximum output, the rated output is more likely about a quarter of this figure (300w) I think for the subs you are looking at, you would be better off with a more powerful amp

Hope this helps

May 06, 2011 | Kicker Car Audio & Video

2 Answers

I have a nitro 1200 watt amp that was working great until it a red light that read " protection mode" turned on


Disconnect all speaker connections and rca cables. Leave power, ground and remote wires intact. Try turning on again. If you still have a protection light your amp is faulty. Hopefully you have warranty
Definitely is worth .A thumbs up would be greatly appreciated if this answer is helpful to you. nitro-1200-watt-amp-working-lv2kkrmxrai4iihdvw4m3np2-1-0.jpg

Aug 25, 2010 | Nitro BMW-482 Car Audio Amplifier

1 Answer

How should i wire my sub


if your amp has a bridge do nt bridge the subs just connect them normal planet audio subs usually dont have a high potential to withstand too much watts even if the subs say 1200 watts thats not true nwatts check the box the subs came in it will tell u true wattage it may say rms

May 24, 2010 | Nitro BMW-481 Car Audio Amplifier

1 Answer

XM-2002GTW Car Amp: i have 2 dual 2-ohms solobaric speakers and im try...


I researched your amp and it looks like its not even 2 ohm stable :( the problem with these companies is they lable there amps 1200 watts MAX, that means they tested the amp in a perfect enviroment and the amp fried somewhere in the ball park of 1200 watts, your best bet is to save your money and buy a nicer amp that is two or one ohm stable... that being said the best way to wire your subs is in series

May 17, 2010 | Sony XM-2002GTW Car Amp

1 Answer

Kicker subs hook up problems


Connect one to each channel, for the best sound.

Jan 05, 2010 | Kicker Solo-Baric L5 Car Subwoofer

1 Answer

What size amp should i get for performance teknique sub-woofers


the amp you have will do the job depending on how may ohm you sub is and can you amp stable to handle low ohm's. you should also check your cabling to make sure its for about a 1500w amp so you dont lose any power

Sep 17, 2009 | Nitro BMW-482 Car Audio Amplifier

1 Answer

2007 NITRO DODGE FRONT DRIVER & PASSENGER


could be but unless you actually check with Chrysler motor corp or you local dealership you wont know for sure. a Service bulletin is usually issued to dealership by the manufacturer if they identify a common problem. Just check with you r local dealer and all will be good in the end.

Aug 03, 2009 | 2007 Dodge Nitro R/T New Cars

1 Answer

Nitro BMW 484 1200 watt amp.


check fuses and remote wire at the head unit. must have a good ground at amp.

Dec 03, 2008 | Nitro BMW-482 Car Audio Amplifier

1 Answer

Shifting Gears


is the shift won't move at all? if so use the car key to unlock it see if it work.

Sep 14, 2008 | 2002 Chrysler 300M

Not finding what you are looking for?
Nitro BMW-484 Car Amp Logo

384 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nitro Car Audio & Video Experts

ravie__s

Level 1 Expert

10 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Michael Kovalik III
Michael Kovalik III

Level 2 Expert

117 Answers

Are you a Nitro Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...