Question about ASUS P4P800 SE (890552603657) Motherboard

2 Answers

My computer says no audio devices. i have speakers bult in the monitor and external ones plugged in. what do I do?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

You need to reinstall the audio drivers from the cd you got with your computer for drivers & utilities

Posted on Sep 10, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 10,406 Answers

Your hardware is fine --- that is not the problem.

You are missing the "driver" software to interface with the audio-device embedded onto your computer's motherboard.

Access the ASUS web-site, and select your specific motherboard, and download the "drivers" for your "audio" device. Install them.

Posted on Sep 10, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get the speakers on the monitor to work? Says I need to plug in headphones or external speakers for any audio to work.


It comes with a 3.5 male to male audio cable. You may have check you check volume settings for level and mute. treat as external speakers

8_31_2012_1_33_33_am.jpg

Aug 30, 2012 | HP Compaq W17q Monitor

1 Answer

I want to make my monitor speakers play sound


Make sure that you have the cable plugged into the monitor and going to the computer if there is one. Some older model monitors operated that way.

Click Start/Control Panel and check your Audio/Sound properties to make sure the drivers are ok. Look for either sound or audio or device manager under the control panel.

Does the sound work for external speakers? Does the sound work for a headphone? Did the computer and monitor come together when you purchased it?

Mar 24, 2012 | HP Computers & Internet

1 Answer

No Sound LGW234T-PF


The LG W2343T does not have speakers. So you can't plug in a 3.5 mm audio patch cable between the computer's line out or headphone jack and the monitor. (Similarly, other devices can't provide sound to the monitor.)

Are you using a desktop or a laptop? If you have a laptop, make sure that the correct audio drivers are loaded for your OS and make sure that the audio isn't muted (look in the lower right on a Windows system in the tray for the speaker icon). On an HP laptop, we had to use the Component Services (Control Panel > System and Security > Administrative tools > Component Services > Services in Windows 7) and stop all audio services and restart them. Then reboot the computer to use the internal speakers at a reasonable volume.

For any unit with external speakers (required for a desktop, optional for a laptop) , connect the speakers to the audio out port (green for 3.5 mm for single connection speakers, see the manual for other speakers) or the headset port. Next make sure that the device drivers are loaded and correct for your sound card (or motherboard audio). (Control Panel > Hardware and Sound > Device Manager). If your sound isn't active, look at the Sound header. Then choose Manage Audio Devices and the Playback tab to select the desired speaker option. (Again these are for Windows 7).

If you still have no audio, make sure that the speakers have power (USB cord or AC adapter plugged in depending on the speakers). If it is USB powered, try a different port or a powered hub. If you have an AC adapter, check if it is warm. Some speakers have power/volume knobs. So check if they are on (if there is an LED, that is an easy check). If still no audio, try a different audio patch cable, if possible. Otherwise, try different speakers. There may be a damaged wire preventing the speakers from working. Depending on the problem and if your speakers are under warranty, it may be worth fixing or not.

Documentation for the monitor is available here: http://www.lg.com/us/computer-products/monitors/LG-lcd-monitor-W2343T-PF.jsp . Click on the Support tab.

If you want to use a stereo receiver with RCA audio inputs, you'll need an adapter or a 3.5 mm to RCA m/m audio cable.

I hope this helps.

CIndy Wells

Oct 21, 2011 | LG W2343T-PF Monitor

1 Answer

Is there any way to use headphones on the HP 2159m computer monitor? possibly external computer speakers? I have a desktop computer connected to the monitor by a HDMI cable.


There is no audio output on that monitor. So decoding the HDMI into analog is out. However, the simple fix is to plug your speakers or headphones into the green 3.5mm headphone jack on the back of your computer, and change the default audio device in windows. You can use both audio cards at once for different tasks, such as having someones voice come over your HDMI cable on the monitor, while listening to music on the audio out of your computer.

If you need any help setting the audio card, let me know.

~KenjiFox

Jan 07, 2011 | HP 2159M Monitor

1 Answer

My view sonic monitor has no sound


Troubleshooting Sound Issues Verify that the audio cable is connected to the AUDIO OUT or LINE OUT output on the Sound Card and plugged into the AUDIO IN or LINE IN of the Monitor.   Make sure there are no cables connected to the Headphone Jack (located next to the AUDIO IN port) on the monitor. If there is, please disconnect that cable and try the speakers again. Connecting a cable to the Headphone Jack disables the speakers. If there is no cable connected into the Headphone Jack, test a pair of headphones into that jack to see if you can hear sound out of the headphones. If you are able to hear sound out of the headphones, disconnect the headphones and try the speakers again.   Verify that the Mute on the monitor is not on or the Volume is not turned down.    Verify that the Mute on the computer is not on or the Volume is not turned down.<    If there is still no audio from the monitor's speakers, connect the Audio cable to another audio source like a portable CD player or tape player headphone output. If audio can be heard through the monitor's speakers, then there may be an issue with the computers sound card.    Connect another set of computer speakers (if available) or headphones to the AUDIO OUT or LINE OUT output on the Sound Card. If NO audio can be heard then there is an issue with the sound card. Verify with the computer's manufacturer for additional assistance.   LCD TVs Troubleshooting No Sound from a LCD TV No Sound when using RGB (when connected to a PC) Confirm the audio cable is plugged into the Audio in on the LCD TV and the audio out on the computer. Note: On the N1700W use the GREEN mini-jack; on this model Audio is SHARED between DVI and RGB, there is only 1 audio channel for data connections. The N1700w is designed to take a 1.0v RMS audio signal for optimal sound quality.   Confirm that both the LCD TV Mute and Windows Mute are off. A general message will be displayed on screen to indicate status of Mute (On or Off).   Press the Volume Up Button on the monitor or remote to confirm the Volume is not set to zero.   Confirm that PC volume is sufficient by using Windows/Macintosh Volume adjustment settings.   Try plugging another audio source such as a CD or Cassette Player directly into the Audio port on the LCD TV to confirm the speakers work, or try plugging headphones or external speakers into the sound card on the Computer. If the Headphones or External Speakers do not work, contact the manufacturer of your Computer for further support. No Sound when using S-Video/Composite/ Component Video Confirm the audio cable is plugged into the Audio in on the LCD TV and the audio out on the S-Video, Composite, or Component Video device.   Confirm Mute is off. A general message will be displayed on screen to indicate status of Mute (On or Off).   Press the Volume Up Button on the LCD TV or Remote to confirm the Volume is not set to zero.   Try plugging headphones or external speakers into the audio port on the S-Video, Composite, or Component Video device. If the Headphones or External Speakers do not work, contact the manufacturer of your S-Video, Composite, or Component Video device.   Note: Some ViewSonic monitors do not include speakers.

Nov 23, 2010 | ViewSonic E70f 17" CRT Monitor

1 Answer

Want to install exterior speakers


Go to menu, use ch. keys and click audio, use vol. keys to go to sub-menu, when sub-menu appears, use ch. key and click down to the tv speakers under heading "speakers", turn them "off". On left side in the back are the audio plugins, the top two under the s-video plugin, red on top, white next down are the two audio speakers rca jacks. Plug your external speakers, like the ones that you'd buy for a computer, in those two. The manual does not say if you plug speakers in these jacks the tv's builtin speakers will be cut off, but this tv I got was being used for a computer monitor and the tv's speakers were turned off from the menu, so I guess plugging in external speakers does not turn off the tv's speakers and would interfer with the external speakers. I suppose you could try it both ways and see, leave the tv's speakers "on" and plug in externals and see if they are turned off automatically.

Jun 04, 2010 | Westinghouse LTV-19w6 Television

1 Answer

How do you hook up an additional set of speakers to this monitor so that I have four speakers working?


You'd need to get a 3.5mm stereo audio jack splitter (aka "headphone jack splitter").
It'll look something like the pictures below.
You should be able to purchase one for a few dollars pretty much anywhere you buy electronics or audio equipment (Radio Shack, Best Buy, etc.).

Once you have that, make sure both your computer and your monitor are turned off.
-Then, unplug the audio cord (that goes from your monitor to your computer) from your computer (you can leave it plugged into the monitor).
-Plug the splitter into your computer where the cord was previously plugged in.
-Next, plug the cord into one of the open jacks on the splitter.
-Plug the audio cable for your *second* set of speakers into the other jack on the splitter.

You should be able to turn on all the devices and have audio coming from all the speakers now.


Let us know if you have more questions!


99ae712.jpg2bc109b.jpg

May 31, 2010 | Samsung SyncMaster 910MP 19" LCD Monitor

1 Answer

Cannot connect speakers to new monitor


if these external expeakers look something like these.. http://www.kelley.iu.edu/TS/z_images/AS501ultra.jpg
those are made specifically for Dell monitors on very exclusive models and they will not fit any other, as the monitor itself provides the power and has the audio output for them.

Dec 12, 2009 | Computers & Internet

2 Answers

No sound from external speakers system


Look into your monitor settings and computer settings and see if you can reverse the "input" and "output". If both are set to line in or line out then they pretty much cancell themselves out.

May 23, 2009 | Televison & Video

2 Answers

No sound out of monitor speakers


Is there actually any unknown devices in the device`manager?

Are your monitor speakers USB or do they plug into the audio out jack of your sound card or motherboard???

If they plug into the sound jack, then test the sound output with a pair of headphones.

Hope this helps you narrow it down. Please reply back if you need further help

Dec 30, 2007 | Mag Innovision LT976S 19" Flat Panel LCD...

Not finding what you are looking for?
ASUS P4P800 SE (890552603657) Motherboard Logo

Related Topics:

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18413 Answers

Alun Cox

Level 3 Expert

2678 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you an ASUS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...