Question about Emerson EWC19T3 19 in. TV/VCR/DVD Combo

1 Answer

STANDBY BUTTON My 32 inch HDTV Emerson Brand stand by button came on last night, and I can not get a picture because the power button light will not stay on. My TV is less than six months old. What can I do?

Posted by on

1 Answer

Re: STANDBY BUTTON - Emerson EWC19T3 19 in. TV/VCR/DVD Combo Combination Televisions

Call 1-800-256-2487 they will help (maybe)

Posted on Feb 12, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do I turn off the standby button next to the power button on my Emerson TV?

I doubt you can.
I one time found a button on a remote so annoying that I used a sharp knife to cut the rubber button even with the remote. I never hit it by mistake anymore. but I could still use the button. :) GL

Feb 12, 2015 | Emerson Combination Televisions

2 Answers

TV Remote Code

you can get here

Jun 03, 2008 | Emerson EWC19T3 19 in. TV/VCR/DVD Combo

1 Answer

How do i get a replacement for my Emerson 26" LCD HDTV DVD/COMBO fell and dented from the stand. My warranty started in Jan. 03, 2014

Not sure whether you can get replacement under warranty if the TV fell off and was damaged. If it was wall mounted and the bracket broke or collapsed you could claim from the bracket supplier or the installer. But if it was on a stand sitting on a table and was knocked down then there is not much that can be done.
Best to call the place from where you purchased the TV and ask what they say.

Aug 27, 2014 | Combination Televisions

1 Answer

I need code for tv


Three digit universal remote code for emerson are:-

004/ 009/ 014/ 023/ 024/ 025/ 026/ 027/ 030/ 032/ 033/ 034/ 035/ 036/ 037/ 038/ 039/ 040/ 041/ 042/ 043/ 045/ 046/ 049/ 053/ 116/ 135/ 147/ 177/ 179

Four digit universal remote code for Emerson TV/vcr combo are:-

0456 [0458 0227]
Where the code is listed as [### ###] the first is for the DVD and the second is for the VCR. Otherwise just the one code operates both the DVD and the VCR

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Also try these four digit codes for Emerson Tv also. There are so many codes for Emerson Tv.
0004 0009 0044 0135 0049 0051 0189 0053 0147 0039 0130 0227 0233 0250 0252 0254 0257 0265 0266 0310 0325 0456 0040 0041 0042 0021 0023 0024 0179 0045 0025 0027 0030 0032 0034 0035 0037

Nov 26, 2010 | Emerson EWC19T3 19 in. TV/VCR/DVD Combo

1 Answer

Bush 32 inch Tv is stuck on standby and 2 year old has broken the remote control. The tv is set up for child lock so pressing the buttons manually is not helping. Have just purchased a universal remote...

If you unplug the power cord, let it sit for a minute and plug it back in, it should let you turn the tv on by the button at least once. Then you can at least get the remote linked up. Please reply back to your post if this resolved the issue. I would rather you try this first before going further.

Jun 30, 2010 | Combination Televisions

1 Answer

Red power light flashes. tv won't turn on.

how old is your tv?? ours was 2 1/2 yrs old it was a 40in lg hd ready lcd tv it just crackled and turned off one night same as yours it would turn on but with no picture or sound....we took it for repair and they said it was something inside that is basically impossible to would have cost more that the tv itself. BUT trading standards say a brand new tv should last upto need to get a free qoute nd if they cant fix it contact trading standards and the tv MANUFACTURER not the shop where you got NEED a reciept to do this for proof of when you purchased it...hope this helps :0)

Jun 29, 2009 | Combination Televisions

4 Answers

VIORE LCD TV/DVD won't turn on

19 in wont turn on. red light just solid , unplugged for a day still same , is there a reset button

Aug 18, 2008 | Combination Televisions

Not finding what you are looking for?
Emerson EWC19T3 19 in. TV/VCR/DVD Combo Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Combination Televisions Experts

The Knight
The Knight

Level 3 Expert

66644 Answers

Cindy Wells

Level 3 Expert

4722 Answers

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

Are you an Emerson Combination Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides