Question about Maytag Dishwashers

2 Answers

I mistakenly put Jet-dry Dishwasher Cleaner in the Rinse Aid holder instead of Jet-dry Rinse Agent. How to I get it out? How do I empty the Rinse Aid holder?

Posted by on

  • kenw363 Sep 10, 2009

    I didn't just put a little in. I put a half cup or more. My Rinse Aid dispenses a little per wash. I only fill it occasionally. Running it through one rinse cycle would only get rid of a little bit of it. I need to get it ALL out of the holder. It's a Maytag Quiet Series 800.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,029 Answers

Get about 5 or 6 feet of clear polyvinyl hose. Stick one end in the dispenser and **** on the other end(do not inhale just ****) and keep blowing what's in the hose in the trash or down the sink. When it seems that you have gotten most of it just fill up the dispenser with rinse aid .hope this helps

Posted on Sep 10, 2009

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Contributor
  • 164 Answers

Run it threw the rinse cycle with the dish washer empty

Posted on Sep 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

There are soapsuds in the bottom of the dishwasher when the cycle is done


This sounds like the dishwasher got the wrong type of soap. It is a real problem to get the wrong soap rinsed out..follow the directions given by the repairman..it may take 5 or 6 cycles... The jet dry is just an extra in this issue...it will be okay when the soap is fully rinsed out.

Feb 02, 2013 | KitchenAid Architect? II K SERIES KUDK03IT...

2 Answers

The rinse aid is not emptying into the dishwasher. How can I fix it?


Not sure about the rinse agent but the film is caused by hard water.

The problem is hard water. www.dishwasherfilter.com has a product to solve this problem once and for all. It filters the water going into your dishwasher and removes the hard minerals that leave those spots. It is very affordable and even has a money back guarantee. You will love the way your dishes look with this product.

Jan 13, 2013 | Jenn-Air 24 in. JDB1090AWS Stainless Steel...

1 Answer

I have a new stainless steel Samsung dishwasher. It doesn't seem to be drying properly. Dishes and dishwasher still very wet after cycle is completed.


Hello

Your dishwasher has been designed to use a liquid rinse aid. Pouring a liquid rinse aid into the proper recepticle in your dishwasher when you add dish detergent greatly improves drying performance. You can further improve drying performance by selecting the Sanitize option, in addition to the other options you've selected, and increasing the water temperature.For Best Results, use Jet-Dry Turbo

Spots and film form in your dishwasher's rinse cycle, when detergents are already down the drain. FINISH® JET-DRY® Rinse Agent works in the rinse cycle, lowering the surface tension of water and causing it to sheet. Better rinsing results in less spots and film.

If these recommendations do not improve drying time, please contact Samsung Customer Care

Sep 07, 2011 | Samsung 24 in. DB5710DT Stainless Steel...

1 Answer

I recently bought a different type of dishwashing detergent for my Frigidare dishwasher and my dishes look as if they have not been rinsed. They cycled all the way through the drying cycle so the detergent...


the best way to use your dishwasher is the way it was designed.
if your unit has a compartment for jet dry or rinse agent then you should add and fill that compartment with rinse aid. try not to buy soap with any extra like soap with jet dry or shine plus . because when you fdo that sometimes customer think that they dont need rinse agent . big mistake. rinse agent is deposited at a certain time in the cycle. diod you know that is you use lets say jet dry and a soap with shine plus or rinse aid in soap the machine can over suds? as a tech trust me i have seen it.let me know if i was helpful. drop a 4thumbs up post

Feb 28, 2010 | Dishwashers

1 Answer

I accidently put Jet Dry DISHWASHER CLEANER in my rinse agent dispenser and I need to know how to drain it out..help!


if you leave loading draw or lid open and do a hot wash with no detergent water will enter replacing the detergent you will have to do this several times till wash tub runs with clear water then refill with rinse agent.

Feb 16, 2010 | Bosch 24 in. SHU43 Built-in Dishwasher

1 Answer

Machine wont empty properly pump seems to work. machine sounds like its operating normally bosch classixx dishwasher


dont use soap with jet dry or rinse aid in it. use regular cascade soap and fill completely with jet dry rinse agent. your unit is over sudzing .if this is helpfulto you send me a 4thumbs up post

Feb 16, 2010 | Bosch 24 in. SGS43C12 Classixx...

1 Answer

The wrong rinse aid!


Vacuum out with a wet/dry shop vac. Suction will pull most of it out. Then fill with water and do it again. You should be good to go.

Jun 19, 2009 | Miele G2430SC Dishwasher

1 Answer

I want to change my rinse aid product


run it through a couple of empty washes or use it just to wash dishes without rinse aid. this should allow you to add rinse aid into the container after each wash there after just add more rinseaid. it could take a while to get full rinseaid coming out but eventually there should be only rinseaid in the container.

Apr 10, 2009 | Maytag 24 in. DWU7402 Built-in Dishwasher

1 Answer

The inside of my stainless steel dishwasher looks as if it has a white film on it. My glasses are also looking like they are etched. I haven't changed the dishwasher soap...any ideas what is causing...


are you using a rinse agent such as jet dry( you should be) and if your using tabs with rinse aid built in dont add extra rinse aid to dispensor, . water temp might be an issueperhaps some detergent has gotten into the rinse aid compartment mistakenly

Nov 04, 2008 | Dishwashers

1 Answer

I accidently bought jet dry cleaner and not jet dry rinse aid and i put it in the rinse aid. what will happen to my dishes. How can i get it out. I have 3 young children i do not want harmed from using my...


jet dry cleaner??? im thinknin its also a dishwasher detergent???if so i wouldn 't worry about at all, no way to empty the dispensor, it will dispence on its own over the coarse of a month. but yea so long as its a dishwasher detergent i would not worry about harm to family

Apr 08, 2008 | Dishwashers

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dishwashers Experts

Mike

Level 3 Expert

4336 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Brad Brown

Level 3 Expert

15441 Answers

Are you a Maytag Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...