Question about Pioneer PureVision PDP-435XDE 43 in. HD-Ready Plasma Television

1 Answer

My Pioneer PDP-435XDE was taken down to decorate the wall it is currently mounted to. When re-mounted and connected it happily goes from Standby to ON for about 10 - 15 seconds and then trips itself back to standby mode and simply refuses to power up. Have I made a simple connection error or is there something far more serious happening here? I have had the TV checked for dry solder joints etc by a local TV repair shop but the problem persists......any advise gratefully received. Kind regards Allan

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 153 Answers

Did you try althe different inputs, maybe it's a unsupported signal being ent to the tv, liek a HD resolution that the tv doesn't support?

change the input and see if you can get anything to display. if the tv continues to go into ower up and standby no matter the input, it needs service.

Posted on Sep 10, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pioneer PDP-R04U receiver blinking Help!?!


How many times this standby/power light blinks at one time switch ON?Count it carefully.These blinks are fault indication, and known as blinking codes.From the number of blinks occur at one time switch ON; you can get an idea about the faulty circuit stage inside the TV.This will make repair easy. For more information, check the link http://electronicshelponline.blogspot.com/ Pull up older posts.

Nov 28, 2013 | Pioneer PDP-4350HD 43 in. Plasma...

1 Answer

My pioneer plasma tv in standby mode and wont turn on


Try restting it by unplugging the tv for a few mins and it should rest to original factory default settings but leave it unplugged 10-15 mins to be sure.

Dec 18, 2011 | Pioneer PDP-4270HD 42 in. Plasma...

1 Answer

Unit will shut down and go into standby mode blue standby light will flash 12 times


its a B+ OVER CURRENT PROTECTION it could be you have a short in the in the power supply of any circuit pertaining to the power supply check T602 AND R672.good luck.

Sep 13, 2011 | Pioneer PDP-5010FD 50 in. Plasma HDTV

1 Answer

I can not put my lcd in hdmi chanel dont have manual


hdmi refers to a conector. The cable box or DVD has a hdmi conector and is needed a cable with a hdmi conector build-in who attaches to the hdmi tv conector. HDMI is a known interface in between the sets that susutitute the RCA conector.

Feb 13, 2009 | Pioneer PureVision PDP-435XDE 43 in....

1 Answer

Picture judder on Pioneer plasma TV


i wouldn't be worry if:
If the tv just does this phenomena for some seconds specially when there is a change from video analog to digital.
if the tv does the issue only for some seconds and then gets back to normal and stays there for the rest of the day.

Dec 22, 2008 | Pioneer PureVision PDP-435XDE 43 in....

1 Answer

PDP-427CMX powers on then the standby blinks 3 times


You could hang it over your bed as a work-around. ;-)

Sep 09, 2008 | Pioneer PDP-427CMX Television

2 Answers

Pioneer pdp 503


Hi, my PDP 50XE just cut out, when powered back on the screen powers down and the standby light flashes twice followed by a 5 sec gap.  Anyone got any thoughts? Thanks

Jun 28, 2008 | Pioneer PureVision PDP-5030HD 50 in....

Not finding what you are looking for?
Pioneer PureVision PDP-435XDE 43 in. HD-Ready Plasma Television Logo

296 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74185 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...