Digital Video Camcorder DDV-M1 driver for Window Vista
I bought a Digital Video Camcorder DDV-M1 here in South Korea last year around May 2006. Now that I change my PC operating system to Window Vista, the driver for my camcorder can no longer install in this new Window Vista operating system.
Right now I'm still using my camcorder. Do you know where can I get the driver for my DDV-M1 Camcorder that is compatible for Window Vista?
I already tried emailing the manufacturer but I did not get any response from them.
Thank you very much on your immediate response.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Almost certainly the battery. They don't last forever.
MY DigiLife DDV 7000 uses an NP-60 battery. I found some of these on Amazon by searching for "np-60", and paid about $1.50 each. You can also sometimes find batteries by searching on the Camera's model number.
My camera does not charge the battery from the USB lead. I have to use a separate charger.
When this problem occur you need to set the memory card unlock or not
Remove the memory card from camera and you can see a small button in
the memory card, so you need to slide that to set the memory card unlock
You need to go to the manufacturers web site and download the Driver & Software to make it work... Usually after you install a driver,as well as using any software provided, you can use something like AMCAP2 to view it.
Not sure of which model exactly your using, but you may check out the web address below.
It appears to be a Chines manfactured Brand, unfortunately alot of these units appear to suffer from a substandard charging system that leads towards a problem with the battery.
The good news is that many mobile phone batteries are often suitable replacements for these to swap out with. I'm picking its probably around a 4.8v or similar flat type battery and is charged either via computer USB connection or through independant charger. A local camera shop won't be a good bet, the shipping to china may out weigh the cost of replacement. I would suggest hunting for a custom battery manufacturer that can supply a replacement battery and hopefully a charger to suit! :o)
As for the on off switch, also a common flaw in the designs, any local video camera repair shop should be able to assist with that part of it. Hope this helps.