How do i put the surrround sound on my tv?

hi,

a) some TV have their own surround system built in, you can

simply turn it on by setting it through your TV remote control.

b) if you want to hear the sound of your TV to your amplifier or

receiver , you need to connect the TV audio out to the

receiver/amplifier audio aux in.

c) having a surround sound on your receiver /amplifier needs

a surround sound processor installed, without the processor

there will be no surround sound.

d) having a receiver with surround sound processor does not

always guarantee that the surround sound will be produced

especially when digital surround sound is concerned.

if there is no digital surround signal from the input, there is

a possibility that some part of the system will not produce

the effect of surround sound.

e) a digital receiver input needs digital output from source.


f) unlike the analog audio which some can be simulated to

have surround sound by means of the surround processor.


f ) surround sound will only activate if there is DTS or Dolby

signals being sent to the decoder of the surround sound

processor.


hope i have helped you, thanks for using Fixya!

Depends on the complexity of your home theater system, but if you are just wanting to get sound from your tv to a generic souround sound, this is very simple. On the back of your tv, there is a audio output with 2 rca connectors. One is white and one is red. Also on the back of the sound system is the same colored inputs. Get the needed cable to connect the 2. You should have surround sound. Given you tv doesnt have audio outputs, your media player ( dvd, vcr, blue ray, sattelite) should have an audio output. Connect the electronic the same way as stated above.