When i pluggled my ps 2 to my television set it started and when I inserted the cd in it then it does not any thing only two options appear on screen browser and system configration and when i clicked on browser it gives me disc read error
Will not read disk
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The laser lens in your player might be dirty or failing. Try the following solutions: Clean the laser lens with a DVD player lense cleaning disc. Lense cleaning discs are available at many electronics retail store and websites.
Hello Check whether the inserted CD spins inside your unit or not. If it spins, and the set does not recogonize the disc, the laser pickup assembly has the trouble and should be replaced with same type and number. If it does not spins, the sled motor, the motor that spins the disc, is faulty and should be replaced. OK.
My unit has started doing the same thing about 6 months ago (the record cd tray keeps opening again after a new disc is inserted.) My unit is about 10 years old so I figured it might be because I've recorded so many CD's and it's not sensing the disc correctly. I'm stubborn, so every time this happens I press the button to reload the disc and keep doing that until it loads correctly and starts reading/initializing. Sometimes it loads after a couple of opening/closing attempts, sometimes it takes a dozen or so attempts. But eventually it loads. It's frustrating to do this but it's worth it because this is such a good unit. However, most importantly the best possible and correct type of discs must be used. The only ones that have worked consistently for me (very rarely is there a bad disc) are Sony CRM80RS. I use these exclusively now. As of April 2011 they're still available online from Amazon and Walmart, and other sites too. Sold in 30 or 50 packages and fairly inexpensive. I've just read some of the other answers on this site and realize the problem could also be connected to a dirty laser, so I'm going to try wiping the 'eye' very gently with a Q-tip. It might help.
Check the disc you're using for scratches and dirt. If the disc is damaged it won't play properly, regardless of the CD player's ability to function. You can use a CD repair device like the "Disc Doctor" to repair the CD or purchase a new CD.
Clean the laser lens with a CD laser lens cleaning disc. CD laser lens cleaning discs can be purchased at most electronics retailers or online. Insert the laser lens cleaning disc and follow the instructions.
Insert a correctly-formatted, undamaged disc into your player. Listen to see if it begins to read the disc. If it continues to make no sound and gives you the same message, then the problem is probably that your disc is not spinning in the device.
Clean the lens while the DVD player is open. A dirty lens is most likely the cause of your no-disc error. The lens should be cleaned with isopropyl alcohol and a cotton swab.
The manual says "C13/Disc Error:
The system cannot read the discinformation correctly.mEject the MD once, then insert it again." It seems this error turns up when the system cannot read the disc properly, one reason for which is a dirty/dusty lens. Try a minidisc lens cleaner if you haven't already.
Failure of this laser is quite common giving a no disc message in the HiFi's display. A defective laser can also be responsible for an intermittent no disc message and general playability problems with CD discs. Part number Optima 7 / 7B Laser Assembly
this one might be a dirty lens and to do that you can go to the local department store and opay about 10 dollars and get a lens cleaner for video games. i have had steros go out and stop playing discs and i just wipe the lens but i wouldent try this on a ps 2, but yea try the lens cleaner, hope that works
The laser lens in your CD might be dirty or failing.
Try the following solutions:
Clean the laser lens with a DVD player lense cleaning disc.
Lense cleaning discs are available at many electronics retail store.
Sorry i can't help you more.