Question about Whirlpool Ultimate Care II LSQ9549L Top Load Washer

1 Answer

Whirlpool Ultimate Care II LSQ8243HQ0 weak spin, wet clothes

The washer does spin and drain, however it seems like the spin cycle doesn't spin strong enough because my clothes come out still wet, especially as load size increases or if I have heavier items like bath towels. I usually have to engage the spin cycle a couple more times, but even then the clothes don't always get drier. I've watched the spin cycle by keeping the lid open and using a screwdriver to depress the lid switch. The drum seems slow to start up and eventually reaches a top speed that seems to be slower than I remember from years ago. It's also out of balance although not excessively so.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 867 Answers

If it has a belt, it may be slipping, but you would smell a bit of burning rubber.in high use times(4 to 8 pm), the current of electric supply is low, thus less power. third, motor may need to be replaced. plz rate-bozcro

Posted on Sep 10, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lsw9750pw3 clothes still wet


If there is water remaining after the drain then the drain pump must be checked. Also check the TILT of the washer and must be inclined to the drain side.
If the clothes are wet then the SPIN RPM is insufficient or the program cycle time is not adequate. Please try with another cycle or check the motor, belt, capacitor as the RPM is low.

Jun 28, 2012 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Clothes still wet after spin cycle; water has drained, agitator seems to spin, but clothes very wet after spin cycle


Hello,

the problem a lot of times when that happens is a broken motor coupler and a coupler is easy and cheap to replace. This video shows how to replace the coupler so watch it to see how to get to coupler to see if its broken.

http://www.youtube.com/user/RepairClinic?v=9K1KHEogf3c&feature=pyv&ad=5457341501&kw=washing%20machine%20coupler

I hope this helps

Gene

Aug 03, 2011 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

I have a Whirlpool Ulitimate II Washing Machine problem. Model LSQ9010KQ0 Serial CM2756127 Type 111. Seems to be working fine expect that after the spin cycle the clothes are still pretty wet. Water is...


It sounds like what you're describing is a weak clutch. The clutch could be worn & slipping or may have oil residue on the clutch pads. I would recommend replacing the clutch. Here is a link to the part.

Jan 12, 2011 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

The spin cycle for my


Dear shelldon39, Fri 2-20-2009 9:24pm EST (USA)

Some machines will shut down during the spin cycle as a precaution to prevent damage!

They will do this if you overload the washer with clothes and/or use too much detergent!

If this doesn't help please get back to me with more details!

jack
1131431.jpg

Feb 21, 2009 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Excess water in clothes after spin cycle


Unblock the outflow pipe from the machine that goes into the sump under the sink. (have a pot ready for water overflow) This will help drain the water. If the spin cycle is making a screetching sort of noise then it is possible that the carbon brushes will need changing. This affects the spinning if the brushes are worn.

Nov 05, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9549L Top Load Washer Logo

739 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2180 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...