Your help is suppose to be free. Why are you

No idea what that question is about

This is the automotive section, of this
chat room or forum

the shaft from the transfer case to the front differential should not turn free by hand because it is connected to the differential.

did you adjust TPS sensor? It has to be adjusted. What is the DTC code?

the other one, and Ive just heard this never had to look for it,, is next to the steering column, passenger side, way up inside, and supposedly a bear to locate, which I assume means its clipped into a holder, behind miles of wires, I feel for you, Good Luck,, maybe you should just pop in to the dealer, and park in the way at the service bay, and ask them to point it out for you, if they say ,, 100 bucks,, :) park the car , walk into the parts department, and ask them in there, they can look it up on the diagrams, and normally for free will give you a print out of the diagram

Hi roa170

You can get all Hyundai repair info from hmaservice.com
Just sign up. It is free for all Hyundai US models.
If you would like to know more great tips and tricks like this, feel free to follow me on Twitter, as: twitter.com/acoates23234

Thanks for asking.

When they start to ask you for your personal and bank account info, so they can supposedly send you money, then you'll realize whether it's scam or not.

Seat belts are supposed to be under warranty for the life of the car, the exceptions being vandalism or abuse. Call your local Kia dealer, and ask them about this. Let me know how you make out, most dealers don't want to do a free fix, but they should. If they refuse to help, I will try to help further. Good luck!

may not be there. thats what i thought too but mine is above the gas tank. sometimes very hard to find. go to auto zone and ask them if you could look in a chiltons or ask if they know

yes for any recall for any vehicle the problem is fixed for free :)
call your dealer to ask if your car is one of them that has the recall on it they will need the VIN to look it up

i would have that looked at they need to be sealed