- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The only way to reset the password if you can't remember the old one is to reset the device.
To load the Dell TrueMobile 2300 Wireless Broadband Router's default settings, hold down the reset button on the router for at least five seconds. While the unit resets, the Power light blinks.
Then navigate to the router through your browser and Type the following as your username: admin Type the following as your password: admin Click the OK button. The Dell TrueMobile Setup Page appears.
Click the Advanced Settings tab. Click the OK button. Click the Administration Settings button on the left side of the page. Put a check in the box to the left of the Change Your Password setting under the section of the page titled Password Settings. Type the password that you want to use in the New Password field. Retype your password in the Retype Password field. Click the Submit button. Another window appears stating You have successfully submitted the settings to this device! Click the Save and Restart button. Your new password will be saved into the router settings. This will however wipe all your settings!
Enabling the WEP for the Dell TrueMobile 2300 Wireless Router
Click the Start button.
Click All Programs.
Click Internet Explorer. The Internet Explorer browser window appears.
Type the following in the Address line: 192.168.2.1
Click the Go button. You are prompted for a Username and Password.
Type the following as your username: admin
Type the following as your password: admin
NOTE: If you previously changed your administrator password in the advanced settings of the router you will need type the password that you set.
Click the OK button. The Dell TrueMobile Setup Page appears.
Click the Basic Settings tab.
Click the Wireless Security button on the left side of the page. The Wireless Security window will appear.
For the highest level of security choose the 128 Bit encryption option. You will have to type a name for your encryption key in the field to the left of the 128 Bit option.
Click the Save and Restart button on the left hand side of the page. The Save and Restart window appears.
Click the Save and Restart button. Your settings will be saved to the router. More Secure
Configure the 2300 Wireless Router for WPA-PSK with TKIP Encryption.
Double-click on Internet Explorer. The Internet Explorer window appears. In the Address Bar type my.router or the default IP address 192.168.2.1. Press the <Enter> key or click Go. The TrueMobile 2300 password window appears. Type the User Name and Password. NOTE: The default user name is admin and the default password is admin.
Click OK. The TrueMobile 2300 Wireless Router configuration window appears. Click Basic Settings. Click Wireless Security in the left-hand pane. Click to select Enable Wireless Security. Under Network Authentication, select WPA (Wireless Protected Access) from the drop-down menu. Input a network key or password in the field to the right of WPA Pre-Shared Key. NOTE: Your network key or password can use 8 to 64 characters using Hexadecimal digits or 8 to 63 characters using ASCII characters.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it. Thanks, Joe
Hello, The default address for the dell truemobile 1184 is 192.168.2.1 If you have changed it and forgot, unplug the router (elec) for 5 seconds. This will reset it to default. The default SSID is "wireless". If a user ID and/or password is asked for enter "admin". Here you can change settings, enable broadcast, change SSID, enable WEP or WPA. Hope this helps.
Connect modem to the internet port of the wrt54g Connect pc to port 2 of the wrt54g Reset the wrt54g, push reset button for 30seconds with the power on, uplug the power for 10 seconds Open internet explorer, type 192.168.1.1, you will be asked to login, no username, password is admin. This will take you to the router page. On the page you will se AUTOMATIC CONFIGURATION DHCP, change that to PPPOe, enter your broadband username and password. Click save settings at the buttom of the page. YOU WILL ONLY GET CONNECTION IF YOUR USERNAME AND PASSWORD IS CORRECT.