Question about Singer CE-100 Futura Computerized Sewing Machine

2 Answers

Cancelling a transmission

When I try to embroider by "sending to machine" it says
"Transmission in process, cancel transmission before beginning another" I have tried everything from turning machine off, re-booting computer and every time I try to sew again I get the same message. Does anyone know how to cancel a transmission?

Posted by on

2 Answers

Re: Cancelling a transmission

Do control/alt/delete and start the task manager.
Click the processes tab.
select the process labelled futura.
right click and select end process.
do this to all futura processes.

restart the futura program and you are good to go.

Posted on Jan 28, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 110 Answers
Re: Cancelling a transmission

You must remember your machine acts like a printer. It will only accept another pattern once the current one is finished. A common fault amongst many users are that they send another pattern while the machine is busy with the current pattern. The correct procedure would be to cancel the current pattern, before sending another one.

You do this by clicking on "exit". Another window will open and ask you if you want to terminate the current transmision to the machine.

If you send one pattern over the current one, your machine is capable of queing and the only wat to resove the issue is by switching the machine off and leaving it off for 60 seconds and resend your nwe pattern

Hope this help you

Posted on Dec 10, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do i cancel previous transmission on singer futura?

you can go to the design on the machine and push skip on all the colors or you can just go to your compter and restart it and it will lose the memory for that design. now that i helped you out can you pleasse help me out on the back of your startup cd there is a access code can you type it in a email back to me and i can assist. you better and correctly. thanks sharon

Feb 17, 2013 | Singer CE-200 Quantum Futura Computerized...

1 Answer

When I try to send a design to my Quantum Futura CE-200 I get a message that a transmission to machine is still pending, and I must cancel the pending design before I can continue. I have not used the...

Go to Go to FAQ and go to #7. Follow the procedure EXACTLY, save one thing that is not on there. BEFORE you do anything, make double-sure your machine is set for embroidery (E) and not sewing (S). Even if you follow the procedure exactly, if your machine is on 'S' and not 'E', you will continue to get the 'transmission' message.

May 23, 2010 | Singer CE-200 Quantum Futura Computerized...

2 Answers

How do I delete a previous transmission to my embroidery attachment on my CE100 (Singer Futura)?

try resetting it, take the hoop out, turn the machine off, and then back on, or try detaching the embroidery unit, and then reattach it. I hope this helps :)

Jan 06, 2010 | Singer CE-100 Futura Computerized Sewing...

1 Answer

Singer CE-200 cancel previous transmission

Easiest solution is to turn everything off (machine, computer, etc.) and restart from the beginning.

Aug 29, 2009 | Singer CE-100 Futura Computerized Sewing...

1 Answer

Canceling a transmission after I have sent it to the sewing machine

Start from the beginning and get the machine ready for embroidery. I found I had not put the feed dogs down when it happened to me

Nov 02, 2008 | Singer CE-200 Quantum Futura Computerized...

1 Answer

Canceling a transmission

By switching sewing machine off.
But if you are talking about message "A transmission to machine is still pending..." you need to update your software.

Aug 20, 2008 | Singer CE-200 Quantum Futura Computerized...

2 Answers


It may be faster and easier to contact your local Singer dealer, or Singer HQ in your country........they will want you to have a good experience with their product, even if it was second hand.....if there is a problem with the machine, they may even suss it over the phone for you.

Jun 09, 2008 | Singer CE-100 Futura Computerized Sewing...

2 Answers

Will not sew

Try turning off the machine and turning it on again. Sometimes this will reset it so it will work. Also, make sure the embroidery foot is in the down position; the machine will pause and "beep" if you haven't lowered it. Hope this helps!

Nov 10, 2006 | Singer CE-100 Futura Computerized Sewing...

Not finding what you are looking for?
Singer CE-100 Futura Computerized Sewing Machine Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Cindy Wells

Level 3 Expert

4721 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides