No instructions to set up technika eco 1stba08 digital box

TRY UNPLUGGING RECEIVER FROM MAINS SOCKET FOR 10 MINS THE RETRY
WWW.GENUINEREMOTES.CO.UK

UNPLUG RECEIVER FOR 10 MINS THEN TRY AGAIN
WWW.GENUINEREMOTES.CO.UK

check the settings in the tv setup menu, the AV ports can usually be configured for analogue or digital,

Hi there. Your hands are driven by the digital. Please consider reviewing the instructions for setting at: http://www.citizenwatch.com/

If there is in fact a fault, please consider returning the watch to citizen for repair and adjustment.

Hello
Four digit universal remote codes for Technica are
0031 0004 0005 0009 0051 0053 0105 0109 0170 0000 0174 0001 0008 0012 0042 0058
Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand

To determine the exact model and specifications of your Citizen Eco-Drive, flip the watch to the reverse. On the case back will be extensive information about your timepiece. You're looking for the "movement caliber," a four-character combination of letters and numbers, separated from the seven-digit "case number" by a hyphen.
Next step, visit this links:
- citizenwatches.com.au/instruction-manuals
- citizenwatch.com/COA/English/settings.asp

Hope this helps (remember to rate this answer).

You can get instructions from the Citizen web site.

Go to "citizen.com" and on the upper right there is a menu. Click on "technical
support" and then on "setting instructions"

Fill in the information required from the back of your watch and then click on
"get setting instructions"


or

Go to "citizen.com" and click on "watch finder".

Put your watch model into the search box on the left and click on
"search".
Click on the watch to view details.
On the right is a small menu, click on "get technical info"

The analogue time can be set to agree with the digital time by following their instruction manual.

If you go to http://www.citizenwatch.com/COA/English/settings.asp and follow the instructions, you can download the ones for your watch.

You can get instructions from the Citizen web site.

Go to "citizen.com" and on the upper right there is a menu. Click on "technical support" and then on "setting instructions"

Fill in the information required from the back of your watch and then click on "get setting instructions"

Hi,
The only way to get the surround sound by your set up box to your system by audio connections ok other than you cannot get from TV surround sound.